Welcome! Log In Create A New Profile
Celebrating 10 years of PedrosBoard!

Expect the best, and accept no substitute.

Products for your Boxster, Cayman and Carrera.

Message: This works for my 2013 Boxster S:

Changed By: Laz
Change Date: September 12, 2022 11:30PM

This works for my 2013 Boxster S:
• With at least ignition on, or engine running, push the lower right wand (the cruise control one) ) forward.

• Select Settings

• Select Display

• Select Vehicle Menu

• You should then see the currently displayed parameters, and you can have up to 4. By selecting any of the 4, you can then select (from several choices) what will display.

• Pulling back the wand will bring you back through the menus to the actual display.

(My selections are coolant temp; oil temp; oil pressure; voltage.)

Original Message

Author: Laz
Date: September 12, 2022 11:27PM

This works for my 2013 Boxster S:
• With at least ignition on, or engine running, push the lower wand (the cruise control one) forward.

• Select Settings

• Select Display

• Select Vehicle Menu

• You should then see the currently displayed parameters, and you can have up to 4. By selecting any of the 4, you can then select (from several choices) what will display.

• Pulling back the wand will bring you back through the menus to the actual display.

(My selections are coolant temp; oil temp; oil pressure; voltage.)