Main Forum

Discussion of Boxsters and other Porsches

Announcements		Last Post
	Instructions for posting photos (NEW & IMPROVED)	10/22/2011 09:51AM
	Our Rules	11/11/2010 04:00PM

Buying through this link, gets PB a donation.	Products for your Boxster, Cayman and Carrera.

Page 121 of 215 Pages:

116 117 118 119 120121122 123 124 125

Forum List New Topic RSS

Post	Views
Car runs rough when engine is cold kskertchly - Saturday, 8 June, 2013, at 1:38:51 am	1,964
Hollow cats Laz - Saturday, 8 June, 2013, at 8:51:57 am	1,114
Re: Hollow cats kskertchly - Saturday, 8 June, 2013, at 11:16:28 pm	920
The first thing I would check is the codes Boxsterra - Saturday, 8 June, 2013, at 8:53:41 am	861
Excellent suggestions! *NM* Laz - Saturday, 8 June, 2013, at 8:54:32 am	975
Re: The first thing I would check is the codes kskertchly - Saturday, 8 June, 2013, at 11:09:03 pm	932
Where ... Pedro (Odessa, FL) - Saturday, 8 June, 2013, at 10:21:26 am	1,102
Re: Where ... kskertchly - Saturday, 8 June, 2013, at 11:13:31 pm	902
Reads like one of the temp sensors is supplying the wrong (too high) temperature.... MarcW - Sunday, 9 June, 2013, at 9:56:35 am	900
Poll on Repair/Replacement Soft Rear Window BarryL - Wednesday, 22 May, 2013, at 12:10:40 am	1,972
replaced with glass (GAHH) installed total was between $1300 and $1400 - would do it again! - NM *NM* 20BoxSter02 - Wednesday, 22 May, 2013, at 5:32:12 am	1,294
Re: replaced with glass (GAHH) installed total was between $1300 and $1400 - would do it again! - NM danz76 - Thursday, 23 May, 2013, at 2:17:07 pm	1,423
Had a quality auto top/upholstery shop replace the cracked window in my 02 Boxster... MarcW - Wednesday, 22 May, 2013, at 10:30:53 am	1,401
Re: Had a quality auto top/upholstery shop replace the cracked window in my 02 Boxster... AndyInNYC - Monday, 3 June, 2013, at 1:34:17 pm	1,412
Re: Poll on Repair/Replacement Soft Rear Window thom4782 - Wednesday, 22 May, 2013, at 10:42:38 am	1,235
Re: Poll on Repair/Replacement Soft Rear Window AndyInNYC - Monday, 3 June, 2013, at 1:11:04 pm	1,137
Re: Poll on Repair/Replacement Soft Rear Window Post Falls Rob - Wednesday, 22 May, 2013, at 11:28:45 am	1,247
Re: Poll on Repair/Replacement Soft Rear Window BarryL - Thursday, 23 May, 2013, at 10:53:35 pm	1,151
Re: Poll on Repair/Replacement Soft Rear Window Al in Melbourne Beach - Friday, 24 May, 2013, at 12:43:10 am	1,170
For those who need to do a temporary repair...just to stop the leaking RainyDayGarage - Friday, 24 May, 2013, at 7:47:43 am	1,364
Re: Poll on Repair/Replacement Soft Rear Window BoxsterBob - San Carlos - Monday, 3 June, 2013, at 6:35:21 pm	1,149
I chose the GAHH w/glass bar10dah - Sunday, 9 June, 2013, at 4:13:16 am	1,442
Why lower coolant temps in 997.2 & DFIs? Bruce In Philly (2000 S Boxster, now '09 C2S) - Friday, 7 June, 2013, at 1:58:35 pm	1,904
My DFI warms to 200 and stays there. Given interpretation of the 01's analog gauge, it seems close. Laz - Friday, 7 June, 2013, at 2:59:25 pm	1,026
Re: My DFI warms to 200 and stays there. Given interpretation of the 01's analog gauge, it seems close. Lawdevil & CURVN8R - Friday, 7 June, 2013, at 5:05:05 pm	1,034
Saw about 245 in Austin stop & go; air temp gauge 130+, and occasionally up to 240 elsewhere. *NM* Laz - Friday, 7 June, 2013, at 6:13:17 pm	977
The opening temperature of the t-stat does not control the temperature at which... MarcW - Saturday, 8 June, 2013, at 11:33:22 am	985
Never believe everything you read on the internet..... I will set you straight, Stereo Installation Petee_C - Friday, 7 June, 2013, at 11:34:36 am	1,357
ADMIN! - Please post the Radio info/price in the "for sale" section. *NM* Boxsterra - Friday, 7 June, 2013, at 12:41:25 pm	773
Bike Rack jeff in VA - Thursday, 6 June, 2013, at 3:21:06 pm	1,670
Re: Bike Rack BoxsterBob - San Carlos - Thursday, 6 June, 2013, at 3:34:32 pm	889
I had the willwood system. Pics here. Bruce In Philly (2000 S Boxster, now '09 C2S) - Thursday, 6 June, 2013, at 4:22:37 pm	1,121
Re: Bike Rack AndyInNYC - Thursday, 6 June, 2013, at 4:21:04 pm	890
Re: Bike Rack jeff in VA - Thursday, 6 June, 2013, at 6:29:32 pm	868
CURVEN8R2 Guenter in Ontario - Thursday, 23 May, 2013, at 11:39:34 am	4,442
I like your long range planning SteveJ (2010 987 base, manual trans) - Thursday, 23 May, 2013, at 1:19:54 pm	1,777
Re: I like your long range planning Guenter in Ontario - Thursday, 23 May, 2013, at 3:42:42 pm	1,654
Awesome Guenter! jg wnc - Thursday, 23 May, 2013, at 2:37:45 pm	1,671
Re: Awesome Guenter! Guenter in Ontario - Thursday, 23 May, 2013, at 3:44:04 pm	1,592
Quite nice, BUT......... Gary in SoFL - Thursday, 23 May, 2013, at 3:35:53 pm	2,323
Re: Quite nice, BUT......... Guenter in Ontario - Thursday, 23 May, 2013, at 4:27:35 pm	1,574
Re: Quite nice, BUT......... Gary in SoFL - Thursday, 23 May, 2013, at 4:48:01 pm	1,612
Re: Quite nice, BUT......... Ryan_K - Wednesday, 5 June, 2013, at 11:11:23 am	1,730
Re: Quite nice, BUT......... Guenter in Ontario - Wednesday, 5 June, 2013, at 12:48:38 pm	1,441
Re: Quite nice, BUT......... Ryan_K - Thursday, 6 June, 2013, at 3:35:49 pm	1,719
Re: Quite nice, BUT......... Gary in SoFL - Thursday, 6 June, 2013, at 5:32:26 pm	1,433
Re: ultra low profile tires Petee_C - Friday, 24 May, 2013, at 3:04:56 pm	1,686
Re: ultra low profile tires Guenter in Ontario - Friday, 24 May, 2013, at 4:02:07 pm	1,638
Re: ultra low profile tires Laz - Friday, 24 May, 2013, at 4:46:09 pm	1,616
Re: ultra low profile tires Guenter in Ontario - Friday, 24 May, 2013, at 5:03:27 pm	1,823
Sport suspension, 20" wheels etc. Roger987 - Saturday, 25 May, 2013, at 10:15:48 am	1,664
Re: Sport suspension, 20" wheels etc. Guenter in Ontario - Saturday, 25 May, 2013, at 10:29:05 am	2,124
Re: Sport suspension, 20" wheels etc. Roger987 - Saturday, 25 May, 2013, at 8:30:49 pm	1,594
Re: Sport suspension, 20" wheels etc. Guenter in Ontario - Saturday, 25 May, 2013, at 8:40:11 pm	1,578
Sweet Mother of ..... Roger987 - Thursday, 23 May, 2013, at 3:50:46 pm	1,536
Re: Sweet Mother of ..... Guenter in Ontario - Thursday, 23 May, 2013, at 4:31:30 pm	1,644
Congratulations Guenter, great post and can hardly wait to see your new Boxster *NM* DougW - Thursday, 23 May, 2013, at 5:19:54 pm	3,057
Re: CURVEN8R2 richard986pei - Thursday, 23 May, 2013, at 6:36:32 pm	1,512
Re: CURVEN8R2 Guenter in Ontario - Thursday, 23 May, 2013, at 11:46:15 pm	1,653
Re: CURVEN8R2 jwdbox - Thursday, 23 May, 2013, at 7:22:39 pm	1,789
Congrats....I think June 2013 will also have 100 days *NM* newt - Thursday, 23 May, 2013, at 9:04:07 pm	1,664
Re: Congrats....I think June 2013 will also have 100 days ...and then there's July... *NM* Guenter in Ontario - Thursday, 23 May, 2013, at 11:47:44 pm	1,448
Re: CURVEN8R2 CarreraLicious - Friday, 24 May, 2013, at 6:03:47 am	1,618
!!! *NM* Laz - Friday, 24 May, 2013, at 7:42:53 am	1,612
Re: CURVEN8R2 Lawdevil & CURVN8R - Sunday, 26 May, 2013, at 9:08:40 pm	1,625
Go 'all in' and take euro delivery??!! jlegelis - Wednesday, 5 June, 2013, at 2:44:37 pm	1,527
Re: Go 'all in' and take euro delivery??!! Guenter in Ontario - Wednesday, 5 June, 2013, at 4:32:43 pm	1,455
Re: CURVEN8R2 m4240z - Thursday, 6 June, 2013, at 4:23:17 pm	1,567
Ghia Laz - Thursday, 6 June, 2013, at 4:42:31 pm	1,531
Ball Joint seperator / puller? grant - Wednesday, 29 May, 2013, at 3:30:26 pm	3,448
Not what I'd use. That's a gear/pulley puller... MarcW - Wednesday, 29 May, 2013, at 3:40:44 pm	3,470
I'm very familiar with both grant - Wednesday, 29 May, 2013, at 3:57:11 pm	1,526
Well, unless the ball joints on the Boxster are hybrids because that is the wrong tool... MarcW - Wednesday, 29 May, 2013, at 6:14:34 pm	2,778
Well, the ball joints (one BJ, one TRE).... grant - Wednesday, 29 May, 2013, at 7:56:05 pm	1,856
If the puller works for you fine. The times I watched the ball joints being separated... MarcW - Thursday, 30 May, 2013, at 7:21:41 am	1,549
Re: If the puller works for you fine. The times I watched the ball joints being separated... Trygve (San Francisco, CA) - Thursday, 30 May, 2013, at 4:45:20 pm	1,587
thanks! *NM* grant - Thursday, 30 May, 2013, at 7:22:53 pm	1,567
Re: Ball Joint seperator / puller? Rob in CO - Wednesday, 29 May, 2013, at 4:19:58 pm	3,603
Axle nuts Rob in CO - Wednesday, 29 May, 2013, at 4:26:22 pm	1,693
Does anyone know why they cannot be re-used? grant - Wednesday, 29 May, 2013, at 4:44:11 pm	1,549
Re: Does anyone know why they cannot be re-used? Rob in CO - Wednesday, 29 May, 2013, at 5:04:10 pm	1,423
Re: Does anyone know why they cannot be re-used? Petee_C - Saturday, 1 June, 2013, at 9:38:26 pm	1,283
a comment..... por911(bc) - Wednesday, 29 May, 2013, at 5:40:20 pm	1,628
Disagree Boxsterra - Monday, 3 June, 2013, at 2:04:31 pm	1,702
OK, thnks. I bought the HF one yesterday after careful triple checking.... *NM* grant - Monday, 3 June, 2013, at 3:36:55 pm	1,496
Re: Ball Joint separator / puller? Ryan_K - Tuesday, 4 June, 2013, at 12:28:39 pm	1,795
I've borrowed tools from auto parts stores many times Boxsterra - Wednesday, 5 June, 2013, at 7:20:20 am	1,558
Re: Ball Joint seperator / puller? aka my ex-wife.... *NM* m4240z - Thursday, 6 June, 2013, at 4:41:25 pm	1,280
Boxster at night BoxsterBob - San Carlos - Thursday, 6 June, 2013, at 11:22:16 am	2,082
Cool shots! *NM* DougW - Thursday, 6 June, 2013, at 12:30:09 pm	838
Re: Boxster at night Guenter in Ontario - Thursday, 6 June, 2013, at 1:33:08 pm	811
Re: Boxster at night BoxsterBob - San Carlos - Thursday, 6 June, 2013, at 2:00:46 pm	779
Re: Boxster at night Guenter in Ontario - Thursday, 6 June, 2013, at 4:30:55 pm	775
Very atmospheric. Nice. *NM* Laz - Thursday, 6 June, 2013, at 4:37:59 pm	871
Water pump - which bolts where? SMILIN - Wednesday, 29 May, 2013, at 1:15:59 am	1,395
"got significant resistance, but cranked it down anyways" Boxsterra - Monday, 3 June, 2013, at 5:17:40 pm	836
Re: "got significant resistance, but cranked it down anyways" SMILIN - Thursday, 6 June, 2013, at 3:55:26 pm	880
I think they're starting to get along. Ryan_K - Thursday, 6 June, 2013, at 3:52:37 pm	1,659
Off topic: Looking for a 500 lb garage lift hoist for storage.....Any ideas? atwnsw - Sunday, 2 June, 2013, at 8:48:07 pm	2,628
Re: Off topic: Looking for a 500 lb garage lift hoist for storage.....Any ideas? thom4782 - Sunday, 2 June, 2013, at 11:09:40 pm	1,244
Re: Off topic: Looking for a 500 lb garage lift hoist for storage.....Any ideas? Ryan_K - Tuesday, 4 June, 2013, at 12:41:15 pm	1,475
Thank you. I am going to check my local grainger store.... *NM* atwnsw - Tuesday, 4 June, 2013, at 5:00:46 pm	998
Re: Thank you. I am going to check my local grainger store.... Ryan_K - Thursday, 6 June, 2013, at 3:12:26 pm	1,231
Sign, sign, everywhere a sign.... Roger987 - Wednesday, 5 June, 2013, at 11:37:24 pm	1,484
perfect weather, perfect road and a perfect car - I rest my case!!! *NM* richard986pei - Thursday, 6 June, 2013, at 7:27:01 am	807
Roger, you must be doing something (or a whole lot) right Guenter in Ontario - Thursday, 6 June, 2013, at 8:01:28 am	761
My wife and I called those Boxster signs *NM* db997S - Thursday, 6 June, 2013, at 11:01:07 am	828
Re: Sign, sign, everywhere a sign.... BoxsterBob - San Carlos - Thursday, 6 June, 2013, at 11:02:03 am	885
A/C grant - Thursday, 23 May, 2013, at 6:15:55 pm	2,363
May not be the A/C SteveJ (2010 987 base, manual trans) - Thursday, 23 May, 2013, at 7:51:25 pm	1,453
Thanks, but no. grant - Friday, 24 May, 2013, at 8:37:51 am	1,252
All I know is there is a test to measure the temp of the air produced by the A/C... MarcW - Thursday, 23 May, 2013, at 9:19:12 pm	1,359
The first thing is to check to see if the A/C is actually functioning Boxsterra - Thursday, 23 May, 2013, at 10:03:39 pm	1,415
Well, now two of you have suggested this.....is it THAT common? grant - Friday, 24 May, 2013, at 12:26:52 pm	1,373
That's a lousy test. For one thing there may not be enough humidity... MarcW - Friday, 24 May, 2013, at 3:21:16 pm	1,340
Marc- I know its not blowing cold air. The question is why.. grant - Friday, 24 May, 2013, at 3:50:05 pm	1,334
If the A/C system was opened up and then not only could low refrigerant... MarcW - Friday, 24 May, 2013, at 8:35:57 pm	1,455
Clearly you haven't spent enough time in the Northeast Boxsterra - Saturday, 25 May, 2013, at 8:02:05 am	1,389
Findings so far... grant - Wednesday, 29 May, 2013, at 3:24:23 pm	1,346
Good, that narrows it down Boxsterra - Monday, 3 June, 2013, at 1:13:32 pm	1,460
Also, the PST2 has an A/C diagnostic test Boxsterra - Monday, 3 June, 2013, at 1:17:42 pm	1,511
Thanks Stefan. COuld you re-read my update post? I thought... grant - Monday, 3 June, 2013, at 3:31:47 pm	1,300
I agree that it's probably low on gas Boxsterra - Monday, 3 June, 2013, at 5:07:18 pm	1,580
And indeed it was low on r134a grant - Wednesday, 5 June, 2013, at 7:50:13 pm	1,516
Re: Findings so far... thom4782 - Monday, 3 June, 2013, at 10:48:24 pm	1,677
Re: A/C...R134A refrigerant RainyDayGarage - Thursday, 23 May, 2013, at 10:34:06 pm	3,191
This is very helpful, need to read. Merci *NM* grant - Friday, 24 May, 2013, at 12:25:36 pm	1,514
Re: A/C boxster99 - Friday, 24 May, 2013, at 10:56:09 am	1,397
The Honda and the Porsche are very different ... Pedro (Odessa, FL) - Friday, 24 May, 2013, at 4:29:02 pm	1,376
This is exactly what Gene Kirschner (PCA tech panel) said.. conveniently he called me today grant - Friday, 24 May, 2013, at 6:46:51 pm	1,435
And, of course, it was 43 degrees this morning. So yes, the air was blowing cold :-) grant - Saturday, 25 May, 2013, at 12:48:05 pm	1,376
Re: A/C thom4782 - Saturday, 25 May, 2013, at 1:27:06 am	1,353
Why do you say 60 deg air? grant - Saturday, 25 May, 2013, at 7:33:29 am	1,192
Re: Why do you say 60 deg air? thom4782 - Sunday, 26 May, 2013, at 6:47:41 pm	1,347
My references are not handy but Porsche has a chart/graph that... MarcW - Monday, 27 May, 2013, at 11:19:50 am	1,254
Re: My references are not handy but Porsche has a chart/graph that... thom4782 - Monday, 27 May, 2013, at 4:17:47 pm	1,390
Thanks, that sounds more like what i would have looked for *NM* grant - Monday, 27 May, 2013, at 5:52:51 pm	1,411
There are digital temperature mikefocke, '01S Sanford, NC - Monday, 27 May, 2013, at 8:53:19 pm	1,350
Yeop, i have one. That's all anyone uses for this anymore. thanks Mike! *NM* grant - Tuesday, 28 May, 2013, at 8:37:40 am	1,428
For those who have experience with and without racing style rear toe links.... grant - Tuesday, 28 May, 2013, at 8:15:04 pm	2,683
Re: For those who have experience with and without racing style rear toe links.... Trygve (San Francisco, CA) - Tuesday, 28 May, 2013, at 10:26:48 pm	1,406
Thank you very much. At them moment... grant - Wednesday, 29 May, 2013, at 8:28:54 am	1,443
I've been doing a bit more reading. grant - Thursday, 30 May, 2013, at 10:30:12 am	1,240
Thanks for the extra research. Rob in CO - Thursday, 30 May, 2013, at 1:26:17 pm	1,412
With lowered suspension you may have to get adjustable toe links Boxsterra - Monday, 3 June, 2013, at 2:13:55 pm	1,425
Hmmm my ROW030 has zero toe with regular dop links, and... grant - Monday, 3 June, 2013, at 3:35:01 pm	1,274
How old is your ROW M030? Boxsterra - Monday, 3 June, 2013, at 4:56:16 pm	1,114
Those are TOE links, not drop links... grant - Wednesday, 5 June, 2013, at 7:47:38 pm	2,209
Re: For those who have experience with and without racing style rear toe links.... Rob in CO - Wednesday, 29 May, 2013, at 10:05:16 am	1,227
I agree re: making incremental changes grant - Wednesday, 29 May, 2013, at 10:44:51 am	1,153
Re: I agree re: making incremental changes Rob in CO - Wednesday, 29 May, 2013, at 12:10:15 pm	1,136
For richard986pei. Pics from BRBS Guenter in Ontario - Tuesday, 4 June, 2013, at 9:02:38 pm	1,522
Re: For richard986pei. Pics from BRBS richard986pei - Wednesday, 5 June, 2013, at 8:56:57 am	819
Re: For richard986pei. Pics from BRBS BoxsterBob - San Carlos - Wednesday, 5 June, 2013, at 10:24:00 am	794
As always, great pics, Guenter Roger987 - Wednesday, 5 June, 2013, at 10:58:07 am	755
Thank you Karl and Ron for a wonderful BRBS!!! Joanne in OC - Monday, 3 June, 2013, at 9:29:31 pm	1,613
Re: Thank you Karl and Ron for a wonderful BRBS!!! Guenter in Ontario - Tuesday, 4 June, 2013, at 8:57:07 am	1,012
+1 Fantastic time! Roger987 - Tuesday, 4 June, 2013, at 9:23:49 am	980
+1 Excellent! Ryan_K - Tuesday, 4 June, 2013, at 12:52:37 pm	1,107
Re: +1 Excellent! MauriceonLongIsland - Tuesday, 4 June, 2013, at 2:02:02 pm	1,175
Missed you guys this year, but I'll be there in 2014 *NM* Gary in SoFL - Tuesday, 4 June, 2013, at 2:39:53 pm	988
Good to meet you Ryan Boxsterra - Wednesday, 5 June, 2013, at 7:14:55 am	984
since we could not make it again this year........... richard986pei - Tuesday, 4 June, 2013, at 7:36:44 pm	955
Rear tire wear Roger987 - Monday, 3 June, 2013, at 8:54:15 am	2,034
Re: Rear tire wear MikenOH - Monday, 3 June, 2013, at 10:31:40 am	1,213
Re: Rear tire wear danz76 - Monday, 3 June, 2013, at 11:07:21 am	1,393
As i read your post, you contradict yourself. grant - Monday, 3 June, 2013, at 11:13:26 am	1,262
Re: As i read your post, you contradict yourself. Roger987 - Monday, 3 June, 2013, at 12:10:15 pm	1,203
Also.... grant - Monday, 3 June, 2013, at 9:33:49 pm	1,160
Cosmic inversion Roger987 - Monday, 3 June, 2013, at 10:08:19 pm	1,218
Rears wearing outside edge first definitely sounds like an alignment problem. Rob in CO - Monday, 3 June, 2013, at 11:32:52 am	1,268
Is that size correct? Nice link to tire wear diagrams. *NM* Laz - Monday, 3 June, 2013, at 1:13:23 pm	1,273
Re: Is that size correct? Nice link to tire wear diagrams. Roger987 - Monday, 3 June, 2013, at 9:21:08 pm	1,334
Thanks. I just thought the width was maybe 10mm narrow, considering the 01 was 255. *NM* Laz - Tuesday, 4 June, 2013, at 10:24:27 am	1,199
My experience with my cars is neither. Inside or out side wear is not normal... MarcW - Monday, 3 June, 2013, at 6:11:46 pm	1,294
Re: Rear tire wear thom4782 - Monday, 3 June, 2013, at 10:34:02 pm	1,167
Alignment booked Roger987 - Tuesday, 4 June, 2013, at 9:37:35 am	1,271
Re: Alignment booked Rob in CO - Tuesday, 4 June, 2013, at 9:51:49 am	1,212
Re: Alignment booked Roger987 - Tuesday, 4 June, 2013, at 10:25:17 am	1,062
$225 in OH. *NM* MikenOH - Tuesday, 4 June, 2013, at 6:43:20 pm	1,307
303 Fabric Guard and UV resistance Bruce In Philly (2000 S Boxster, now '09 C2S) - Tuesday, 4 June, 2013, at 12:41:28 pm	1,380
Thanks. I take the answer as "No." *NM* Laz - Tuesday, 4 June, 2013, at 2:27:14 pm	762
Porsche legal news Laz - Tuesday, 4 June, 2013, at 2:20:34 pm	1,197
If i undo the iner CV joint at the tranny....is there room grant - Saturday, 1 June, 2013, at 2:53:04 pm	1,506
Re: If i undo the iner CV joint at the tranny....is there room Petee_C - Saturday, 1 June, 2013, at 9:33:56 pm	888
I'm not following.... grant - Sunday, 2 June, 2013, at 8:26:15 am	866
Re: I'm not following.... Petee_C - Monday, 3 June, 2013, at 9:18:46 am	879
So, once oy undiud the axle nut and removed the inner end of the control arm, ... grant - Monday, 3 June, 2013, at 11:15:57 am	854
Been a few years but..... Rob in CO - Monday, 3 June, 2013, at 11:28:35 am	830
Re: So, once you undid the axle nut and removed the inner end of the control arm, ... Petee_C - Monday, 3 June, 2013, at 11:30:11 am	903
...anyone? *NM* grant - Sunday, 2 June, 2013, at 5:58:42 pm	873
Re: ...anyone? Rob in CO - Sunday, 2 June, 2013, at 7:22:44 pm	845
Those are in fact the instructions, except for some cryptic ones on pelican parts.. grant - Monday, 3 June, 2013, at 8:19:36 am	865
Is this sick, or what?...... (NPC) Pedro (Odessa, FL) - Thursday, 16 May, 2013, at 8:53:40 am	2,387
Risky, but it's a Mustang P51D Laz - Thursday, 16 May, 2013, at 10:27:23 am	1,325
That is one treemendous rescue. *NM* Guenter in Ontario - Thursday, 16 May, 2013, at 7:52:16 pm	1,166
Did you mean "trèsmendous?" *NM* Laz - Thursday, 16 May, 2013, at 8:01:39 pm	1,183
Nope. Meant what I said. *NM* Guenter in Ontario - Thursday, 16 May, 2013, at 8:28:11 pm	1,160
Or is that: Said what I meant. *NM* Guenter in Ontario - Thursday, 16 May, 2013, at 8:29:14 pm	1,195
Not sick. It was an outstanding good deed. Thanks for sharing. *NM* Jeff (Philly) - Friday, 17 May, 2013, at 12:21:15 pm	1,239
I meant sick in 21st century lexicon *NM* Pedro (Odessa, FL) - Friday, 17 May, 2013, at 7:47:02 pm	1,162
This is sick in 20th century lexicon ... Pedro (Odessa, FL) - Friday, 17 May, 2013, at 7:57:23 pm	1,149
Could've been REALLY sick if he'd missed... *NM* Leor ('09S, North of Boston) - Friday, 24 May, 2013, at 4:52:13 pm	1,280
Pedro, I guess I am not up to speed on 21st century lexicon and as an ex Sky Diver I do not think -> Jeff (Philly) - Friday, 31 May, 2013, at 9:42:09 am	1,058
That's just sick.... mikefocke, '01S Sanford, NC - Friday, 31 May, 2013, at 5:55:26 pm	1,239
Swell comment! *NM* Laz - Friday, 31 May, 2013, at 6:09:04 pm	1,082
Nice one. That was pretty sick :-) *NM* grant - Saturday, 1 June, 2013, at 7:43:56 am	1,058
groovy? *NM* Pedro (Odessa, FL) - Monday, 3 June, 2013, at 10:36:59 am	1,088
Mike thanks for the explanation. I had never heard the word used that way before. I just re watched Jeff (Philly) - Monday, 3 June, 2013, at 11:01:47 am	1,086
Amazing. He had a great time and made the kid ( and his Grand-da?) pretty happy *NM* grant - Friday, 17 May, 2013, at 1:38:49 pm	1,198
Re: Is this sick, or what?...... (NPC) Frissen - Sunday, 19 May, 2013, at 11:18:22 pm	1,220
Re: Is this sick, or what?...... (NPC) Mark from SC - Monday, 3 June, 2013, at 7:01:19 am	1,251
Need some advice on IMS preventive maintenance (replacement)....... Tony in Whittier - Saturday, 25 May, 2013, at 12:48:58 pm	2,141
My opinion is... grant - Saturday, 25 May, 2013, at 2:21:33 pm	1,160
Re: My opinion is... Tony in Whittier - Sunday, 26 May, 2013, at 4:49:43 pm	1,182
Pedro is getting ready to announce something highly relevant Boxsterra - Sunday, 26 May, 2013, at 8:25:48 am	1,204
Heed Boxsterra's advice *NM* Pedro (Odessa, FL) - Sunday, 26 May, 2013, at 4:02:28 pm	1,365
Oh yea, i forgot about that mystery. Steve-Jobs-Bonilla's secret :-) grant - Monday, 27 May, 2013, at 8:16:24 am	1,201
It's not a mystery, just an "unveiling" *NM* Pedro (Odessa, FL) - Monday, 27 May, 2013, at 1:15:12 pm	1,222
So's an Iphone launch! You're in good company :-) *NM* grant - Monday, 27 May, 2013, at 1:20:23 pm	1,178
Re: It's not a mystery, just an "unveiling" danz76 - Tuesday, 28 May, 2013, at 2:14:54 pm	1,434
Re: Need some advice on IMS preventive maintenance (replacement)....... JiminAZ - Sunday, 26 May, 2013, at 10:07:43 pm	1,387
Re: Need some advice on IMS preventive maintenance (replacement)....... Rob in CO - Tuesday, 28 May, 2013, at 11:07:32 am	1,069
Re: Need some advice on IMS preventive maintenance (replacement)....... Ed B - Sunday, 2 June, 2013, at 9:54:38 am	1,144
Yes, you have, but thanks again! *NM* grant - Sunday, 2 June, 2013, at 10:58:18 am	1,071
Re: Need some advice on IMS preventive maintenance (replacement)....... thom4782 - Sunday, 2 June, 2013, at 7:57:46 pm	1,047
I think BRBS is going on...now? Am i right? So soon. grant - Sunday, 2 June, 2013, at 8:20:15 pm	1,163
Just replaced Subaru BRZ with Ohlin coil overs..... Bruce In Philly (2000 S Boxster, now '09 C2S) - Wednesday, 29 May, 2013, at 4:17:18 pm	3,119
Thanks for the info. I think he can make this thing work grant - Wednesday, 29 May, 2013, at 8:10:18 pm	1,344
Not harsh.... hard but not harsh Bruce In Philly (2000 S Boxster, now '09 C2S) - Thursday, 30 May, 2013, at 12:01:36 pm	1,469
Re: Just replaced Subaru BRZ with Ohlin coil overs..... SMILIN - Thursday, 30 May, 2013, at 9:49:59 pm	1,291
Well.... Driving Impressions Bruce In Philly (2000 S Boxster, now '09 C2S) - Friday, 31 May, 2013, at 10:15:38 am	1,347
Underpowered grant - Friday, 31 May, 2013, at 2:31:10 pm	1,417
Maybe the impression has to do with gearing (+tire diameter.) Laz - Friday, 31 May, 2013, at 3:09:01 pm	1,264
Good point Laz.... More on power and perception... Bruce In Philly (2000 S Boxster, now '09 C2S) - Friday, 31 May, 2013, at 4:03:55 pm	1,078
And your boxster has gobs more torque than mine! grant - Friday, 31 May, 2013, at 5:21:12 pm	1,537
Thanks for sharing your additional thoughts *NM* SMILIN - Saturday, 1 June, 2013, at 12:34:45 pm	1,327
Bruce - can you email or TXT me? grant - Sunday, 2 June, 2013, at 8:37:20 am	1,328
Heater Core Replacement EZ AIRE - Tuesday, 14 May, 2013, at 9:55:01 pm	1,745
Picture here.... what year is your car? Bruce In Philly (2000 S Boxster, now '09 C2S) - Wednesday, 15 May, 2013, at 8:22:55 am	985
Re: Picture here.... what year is your car? BarryL - Thursday, 23 May, 2013, at 11:11:47 pm	1,093
Re: Heater Core Replacement BoxsterBob - San Carlos - Wednesday, 15 May, 2013, at 10:34:57 am	1,487
Re: Heater Core Replacement EZ AIRE - Wednesday, 15 May, 2013, at 7:21:58 pm	2,510
Re: Heater Core Replacement - Source for heater core part? BarryL - Saturday, 18 May, 2013, at 2:46:40 pm	1,006
I got the OEM through Pelican Bruce In Philly (2000 S Boxster, now '09 C2S) - Sunday, 19 May, 2013, at 3:31:19 pm	889
Thanks, Bruce. *NM* BarryL - Sunday, 19 May, 2013, at 6:49:15 pm	948
Re: Heater Core Replacement - Source for heater core part? EZ AIRE - Friday, 31 May, 2013, at 10:40:17 pm	858
Re: Heater Core Replacement - Source for heater core part? BarryL - Sunday, 2 June, 2013, at 1:50:30 am	920
Anyone out there from the Syracuse area? Dunkirk - Saturday, 1 June, 2013, at 10:54:30 pm	1,412
Porsche of Mayberry Roger987 - Tuesday, 28 May, 2013, at 10:22:48 pm	1,658
Re: Porsche of Mayberry richard986pei - Wednesday, 29 May, 2013, at 6:07:42 am	968
Re: Porsche of Mayberry KevinR-MedinaOhio - Friday, 31 May, 2013, at 8:56:52 pm	1,101
Re: Porsche of Mayberry MikenOH - Saturday, 1 June, 2013, at 7:35:43 am	891
Re: Porsche of Mayberry KevinR-MedinaOhio - Saturday, 1 June, 2013, at 10:53:13 am	1,135
Skittish and axle tromp Laz - Saturday, 25 May, 2013, at 6:49:00 pm	2,376
Re: Skittish and axle tromp Guenter in Ontario - Saturday, 25 May, 2013, at 7:46:58 pm	1,243
Yeah, I'm thinking tire compound. Was definitely tromp. Oh, didn't mention car has PTV. Laz - Saturday, 25 May, 2013, at 7:58:36 pm	1,209
Re: Yeah, I'm thinking tire compound. Was definitely tromp. Oh, didn't mention car has PTV. Guenter in Ontario - Saturday, 25 May, 2013, at 8:36:36 pm	1,173
No indicator light... Laz - Saturday, 25 May, 2013, at 9:48:25 pm	1,242
Re: No indicator light... Guenter in Ontario - Saturday, 25 May, 2013, at 10:20:11 pm	1,198
Partial answer Laz - Saturday, 25 May, 2013, at 10:54:19 pm	1,126
Re: Partial answer MikenOH - Sunday, 26 May, 2013, at 7:41:21 am	1,193
Another couple parts: Laz - Tuesday, 28 May, 2013, at 11:16:11 am	1,256
More detailed trip info Laz - Tuesday, 28 May, 2013, at 7:00:53 pm	1,231
"Trip" field doesn't have consumption info, just more tme, distance, etc. *NM* Laz - Saturday, 1 June, 2013, at 8:53:36 am	1,510
Blue Ridge Parkway is ready for us [pic] hoppy44 - Friday, 24 May, 2013, at 10:15:05 pm	1,808
YEAH!!!! Can't wait .... Looks like the weather will be better than prior years *NM* Joanne in OC - Saturday, 25 May, 2013, at 1:56:44 am	1,009
I'm on my way ! Roger987 - Saturday, 25 May, 2013, at 10:08:46 am	1,028
I'm in route to BRBS...... currently in Chicago Joanne in OC - Wednesday, 29 May, 2013, at 3:41:43 pm	1,054
Re: The Tail of the Dragon Was Fun KevinR-MedinaOhio - Friday, 31 May, 2013, at 8:52:12 pm	1,259
One disadvantage of using Ragg Top Laz - Tuesday, 28 May, 2013, at 7:06:41 pm	2,158
I quit using it. I am on my 4th Boxster and I find that using protectorant is just Jeff (Philly) - Friday, 31 May, 2013, at 9:12:37 am	1,634
I will admit.... grant - Friday, 31 May, 2013, at 9:28:25 am	1,268
Figured it's more to do with protecting the fabric, not the membrane, from environmental damage. *NM* Laz - Friday, 31 May, 2013, at 9:37:02 am	1,268
No benefit. Waste of your time. *NM* Jeff (Philly) - Friday, 31 May, 2013, at 9:45:45 am	1,150
Perhaps, but many of us do all sorts of things to protect and enhance all the other surfaces... Laz - Friday, 31 May, 2013, at 12:14:49 pm	1,212
Re: No benefit. Waste of your time. Bobtesa - Friday, 31 May, 2013, at 2:06:51 pm	1,247
Good point. Rebuttal tk? *NM* Laz - Friday, 31 May, 2013, at 3:10:12 pm	1,129
I didn't know that Porsche Recommends anything. I would like to read about it. Maybe I am wrong. *NM* Jeff (Philly) - Friday, 31 May, 2013, at 4:45:09 pm	1,240
Porsche branded product: (grammar edit) Laz - Friday, 31 May, 2013, at 5:27:46 pm	1,212
Maybe... but for 12 years, I used.... Some pics here... Bruce In Philly (2000 S Boxster, now '09 C2S) - Friday, 31 May, 2013, at 3:46:47 pm	1,200
The car looks terrific! Does 303 give UV protection? *NM* Laz - Friday, 31 May, 2013, at 4:09:39 pm	1,108
UV Protection.... you got me wondering..... Bruce In Philly (2000 S Boxster, now '09 C2S) - Friday, 31 May, 2013, at 4:28:08 pm	1,122
Condition of the top is very, very good (for a car with 199k miles and 14 years) grant - Friday, 31 May, 2013, at 5:20:06 pm	1,293
AOS Replacement Question jjspike - Sunday, 26 May, 2013, at 9:06:18 pm	2,339
Re: AOS Replacement Question grant - Monday, 27 May, 2013, at 8:20:06 am	1,160
Re: AOS Replacement Question jjspike - Monday, 27 May, 2013, at 9:59:58 am	1,054
Re: AOS Replacement Question Pedro (Odessa, FL) - Monday, 27 May, 2013, at 10:12:26 am	975
The AOS as a source of oil consumption is a theory I've had for some time... MarcW - Monday, 27 May, 2013, at 11:11:12 am	1,314
Re: AOS Replacement Question Pedro (Odessa, FL) - Monday, 27 May, 2013, at 9:59:39 am	1,159
Re: AOS Replacement Question jjspike - Monday, 27 May, 2013, at 2:06:41 pm	1,083
Re: AOS Replacement Question Pedro (Odessa, FL) - Tuesday, 28 May, 2013, at 7:13:38 am	988
First, i agree with all of Pedros listed points. Next, yes you can access it from the RR... grant - Tuesday, 28 May, 2013, at 8:34:30 am	1,076
Re: AOS Replacement Question jjspike - Monday, 27 May, 2013, at 6:08:05 pm	1,157
That's a normal-looking tee. Most look like that. *NM* Pedro (Odessa, FL) - Tuesday, 28 May, 2013, at 7:09:02 am	1,088
Re: That's a normal-looking tee. Most look like that. jjspike - Tuesday, 28 May, 2013, at 12:23:36 pm	1,021
You'd be surprised how much is normal. *NM* Pedro (Odessa, FL) - Wednesday, 29 May, 2013, at 12:16:05 am	1,035
Here's a pic of the access from the wheel well. grant - Tuesday, 28 May, 2013, at 8:19:53 pm	1,255
Agree that it can be done from the top alone but.... Rob in CO - Wednesday, 29 May, 2013, at 10:30:14 am	1,187
Did the job tonight - from the top jjspike - Wednesday, 29 May, 2013, at 10:56:41 pm	1,102

Forum List New Topic RSS

Page 121 of 215 Pages:

116 117 118 119 120121122 123 124 125

Main Forum

Car runs rough when engine is cold kskertchly - Saturday, 8 June, 2013, at 1:38:51 am

Hollow cats Laz - Saturday, 8 June, 2013, at 8:51:57 am

Re: Hollow cats kskertchly - Saturday, 8 June, 2013, at 11:16:28 pm

The first thing I would check is the codes Boxsterra - Saturday, 8 June, 2013, at 8:53:41 am

Excellent suggestions! *NM* Laz - Saturday, 8 June, 2013, at 8:54:32 am

Re: The first thing I would check is the codes kskertchly - Saturday, 8 June, 2013, at 11:09:03 pm

Where ... Pedro (Odessa, FL) - Saturday, 8 June, 2013, at 10:21:26 am

Re: Where ... kskertchly - Saturday, 8 June, 2013, at 11:13:31 pm

Reads like one of the temp sensors is supplying the wrong (too high) temperature.... MarcW - Sunday, 9 June, 2013, at 9:56:35 am

Poll on Repair/Replacement Soft Rear Window BarryL - Wednesday, 22 May, 2013, at 12:10:40 am

replaced with glass (GAHH) installed total was between $1300 and $1400 - would do it again! - *NM* *NM* 20BoxSter02 - Wednesday, 22 May, 2013, at 5:32:12 am

Re: replaced with glass (GAHH) installed total was between $1300 and $1400 - would do it again! - *NM* danz76 - Thursday, 23 May, 2013, at 2:17:07 pm

Had a quality auto top/upholstery shop replace the cracked window in my 02 Boxster... MarcW - Wednesday, 22 May, 2013, at 10:30:53 am

Re: Had a quality auto top/upholstery shop replace the cracked window in my 02 Boxster... AndyInNYC - Monday, 3 June, 2013, at 1:34:17 pm

Re: Poll on Repair/Replacement Soft Rear Window thom4782 - Wednesday, 22 May, 2013, at 10:42:38 am

Re: Poll on Repair/Replacement Soft Rear Window AndyInNYC - Monday, 3 June, 2013, at 1:11:04 pm

Re: Poll on Repair/Replacement Soft Rear Window Post Falls Rob - Wednesday, 22 May, 2013, at 11:28:45 am

Re: Poll on Repair/Replacement Soft Rear Window BarryL - Thursday, 23 May, 2013, at 10:53:35 pm

Re: Poll on Repair/Replacement Soft Rear Window Al in Melbourne Beach - Friday, 24 May, 2013, at 12:43:10 am

For those who need to do a temporary repair...just to stop the leaking RainyDayGarage - Friday, 24 May, 2013, at 7:47:43 am

Re: Poll on Repair/Replacement Soft Rear Window BoxsterBob - San Carlos - Monday, 3 June, 2013, at 6:35:21 pm

I chose the GAHH w/glass bar10dah - Sunday, 9 June, 2013, at 4:13:16 am

Why lower coolant temps in 997.2 & DFIs? Bruce In Philly (2000 S Boxster, now '09 C2S) - Friday, 7 June, 2013, at 1:58:35 pm

My DFI warms to 200 and stays there. Given interpretation of the 01's analog gauge, it seems close. Laz - Friday, 7 June, 2013, at 2:59:25 pm

Re: My DFI warms to 200 and stays there. Given interpretation of the 01's analog gauge, it seems close. Lawdevil & CURVN8R - Friday, 7 June, 2013, at 5:05:05 pm

Saw about 245 in Austin stop & go; air temp gauge 130+, and occasionally up to 240 elsewhere. *NM* Laz - Friday, 7 June, 2013, at 6:13:17 pm

The opening temperature of the t-stat does not control the temperature at which... MarcW - Saturday, 8 June, 2013, at 11:33:22 am

Never believe everything you read on the internet..... I will set you straight, Stereo Installation Petee_C - Friday, 7 June, 2013, at 11:34:36 am

ADMIN! - Please post the Radio info/price in the "for sale" section. *NM* Boxsterra - Friday, 7 June, 2013, at 12:41:25 pm

Bike Rack jeff in VA - Thursday, 6 June, 2013, at 3:21:06 pm

Re: Bike Rack BoxsterBob - San Carlos - Thursday, 6 June, 2013, at 3:34:32 pm

I had the willwood system. Pics here. Bruce In Philly (2000 S Boxster, now '09 C2S) - Thursday, 6 June, 2013, at 4:22:37 pm

Re: Bike Rack AndyInNYC - Thursday, 6 June, 2013, at 4:21:04 pm

Re: Bike Rack jeff in VA - Thursday, 6 June, 2013, at 6:29:32 pm

CURVEN8R2 Guenter in Ontario - Thursday, 23 May, 2013, at 11:39:34 am

I like your long range planning SteveJ (2010 987 base, manual trans) - Thursday, 23 May, 2013, at 1:19:54 pm

Re: I like your long range planning Guenter in Ontario - Thursday, 23 May, 2013, at 3:42:42 pm

Awesome Guenter! jg wnc - Thursday, 23 May, 2013, at 2:37:45 pm

Re: Awesome Guenter! Guenter in Ontario - Thursday, 23 May, 2013, at 3:44:04 pm

Quite nice, BUT......... Gary in SoFL - Thursday, 23 May, 2013, at 3:35:53 pm

Re: Quite nice, BUT......... Guenter in Ontario - Thursday, 23 May, 2013, at 4:27:35 pm

Re: Quite nice, BUT......... Gary in SoFL - Thursday, 23 May, 2013, at 4:48:01 pm

Re: Quite nice, BUT......... Ryan_K - Wednesday, 5 June, 2013, at 11:11:23 am

Re: Quite nice, BUT......... Guenter in Ontario - Wednesday, 5 June, 2013, at 12:48:38 pm

Re: Quite nice, BUT......... Ryan_K - Thursday, 6 June, 2013, at 3:35:49 pm

Re: Quite nice, BUT......... Gary in SoFL - Thursday, 6 June, 2013, at 5:32:26 pm

Re: ultra low profile tires Petee_C - Friday, 24 May, 2013, at 3:04:56 pm

Re: ultra low profile tires Guenter in Ontario - Friday, 24 May, 2013, at 4:02:07 pm

Re: ultra low profile tires Laz - Friday, 24 May, 2013, at 4:46:09 pm

Re: ultra low profile tires Guenter in Ontario - Friday, 24 May, 2013, at 5:03:27 pm

Sport suspension, 20" wheels etc. Roger987 - Saturday, 25 May, 2013, at 10:15:48 am

Re: Sport suspension, 20" wheels etc. Guenter in Ontario - Saturday, 25 May, 2013, at 10:29:05 am

Re: Sport suspension, 20" wheels etc. Roger987 - Saturday, 25 May, 2013, at 8:30:49 pm

Re: Sport suspension, 20" wheels etc. Guenter in Ontario - Saturday, 25 May, 2013, at 8:40:11 pm

Sweet Mother of ..... Roger987 - Thursday, 23 May, 2013, at 3:50:46 pm

Re: Sweet Mother of ..... Guenter in Ontario - Thursday, 23 May, 2013, at 4:31:30 pm

Congratulations Guenter, great post and can hardly wait to see your new Boxster *NM* DougW - Thursday, 23 May, 2013, at 5:19:54 pm

Re: CURVEN8R2 richard986pei - Thursday, 23 May, 2013, at 6:36:32 pm

Re: CURVEN8R2 Guenter in Ontario - Thursday, 23 May, 2013, at 11:46:15 pm

Re: CURVEN8R2 jwdbox - Thursday, 23 May, 2013, at 7:22:39 pm

Congrats....I think June 2013 will also have 100 days *NM* newt - Thursday, 23 May, 2013, at 9:04:07 pm

Re: Congrats....I think June 2013 will also have 100 days ...and then there's July... *NM* Guenter in Ontario - Thursday, 23 May, 2013, at 11:47:44 pm

Re: CURVEN8R2 CarreraLicious - Friday, 24 May, 2013, at 6:03:47 am

!!! *NM* Laz - Friday, 24 May, 2013, at 7:42:53 am

Re: CURVEN8R2 Lawdevil & CURVN8R - Sunday, 26 May, 2013, at 9:08:40 pm

Go 'all in' and take euro delivery??!! jlegelis - Wednesday, 5 June, 2013, at 2:44:37 pm

Re: Go 'all in' and take euro delivery??!! Guenter in Ontario - Wednesday, 5 June, 2013, at 4:32:43 pm

Re: CURVEN8R2 m4240z - Thursday, 6 June, 2013, at 4:23:17 pm

Ghia Laz - Thursday, 6 June, 2013, at 4:42:31 pm

Ball Joint seperator / puller? grant - Wednesday, 29 May, 2013, at 3:30:26 pm

Not what I'd use. That's a gear/pulley puller... MarcW - Wednesday, 29 May, 2013, at 3:40:44 pm

I'm very familiar with both grant - Wednesday, 29 May, 2013, at 3:57:11 pm

Well, unless the ball joints on the Boxster are hybrids because that is the wrong tool... MarcW - Wednesday, 29 May, 2013, at 6:14:34 pm

Well, the ball joints (one BJ, one TRE).... grant - Wednesday, 29 May, 2013, at 7:56:05 pm

If the puller works for you fine. The times I watched the ball joints being separated... MarcW - Thursday, 30 May, 2013, at 7:21:41 am

Re: If the puller works for you fine. The times I watched the ball joints being separated... Trygve (San Francisco, CA) - Thursday, 30 May, 2013, at 4:45:20 pm

thanks! *NM* grant - Thursday, 30 May, 2013, at 7:22:53 pm

Re: Ball Joint seperator / puller? Rob in CO - Wednesday, 29 May, 2013, at 4:19:58 pm

Axle nuts Rob in CO - Wednesday, 29 May, 2013, at 4:26:22 pm

Car runs rough when engine is cold
kskertchly - Saturday, 8 June, 2013, at 1:38:51 am

Hollow cats
Laz - Saturday, 8 June, 2013, at 8:51:57 am

Re: Hollow cats
kskertchly - Saturday, 8 June, 2013, at 11:16:28 pm

The first thing I would check is the codes
Boxsterra - Saturday, 8 June, 2013, at 8:53:41 am

Excellent suggestions! NM
Laz - Saturday, 8 June, 2013, at 8:54:32 am

Re: The first thing I would check is the codes
kskertchly - Saturday, 8 June, 2013, at 11:09:03 pm

Where ...
Pedro (Odessa, FL) - Saturday, 8 June, 2013, at 10:21:26 am

Re: Where ...
kskertchly - Saturday, 8 June, 2013, at 11:13:31 pm

Reads like one of the temp sensors is supplying the wrong (too high) temperature....
MarcW - Sunday, 9 June, 2013, at 9:56:35 am

Poll on Repair/Replacement Soft Rear Window
BarryL - Wednesday, 22 May, 2013, at 12:10:40 am

replaced with glass (GAHH) installed total was between $1300 and $1400 - would do it again! - NM NM
20BoxSter02 - Wednesday, 22 May, 2013, at 5:32:12 am

Re: replaced with glass (GAHH) installed total was between $1300 and $1400 - would do it again! - NM
danz76 - Thursday, 23 May, 2013, at 2:17:07 pm

Had a quality auto top/upholstery shop replace the cracked window in my 02 Boxster...
MarcW - Wednesday, 22 May, 2013, at 10:30:53 am

Re: Had a quality auto top/upholstery shop replace the cracked window in my 02 Boxster...
AndyInNYC - Monday, 3 June, 2013, at 1:34:17 pm

Re: Poll on Repair/Replacement Soft Rear Window
thom4782 - Wednesday, 22 May, 2013, at 10:42:38 am

Re: Poll on Repair/Replacement Soft Rear Window
AndyInNYC - Monday, 3 June, 2013, at 1:11:04 pm

Re: Poll on Repair/Replacement Soft Rear Window
Post Falls Rob - Wednesday, 22 May, 2013, at 11:28:45 am

Re: Poll on Repair/Replacement Soft Rear Window
BarryL - Thursday, 23 May, 2013, at 10:53:35 pm

Re: Poll on Repair/Replacement Soft Rear Window
Al in Melbourne Beach - Friday, 24 May, 2013, at 12:43:10 am

For those who need to do a temporary repair...just to stop the leaking
RainyDayGarage - Friday, 24 May, 2013, at 7:47:43 am

Re: Poll on Repair/Replacement Soft Rear Window
BoxsterBob - San Carlos - Monday, 3 June, 2013, at 6:35:21 pm

I chose the GAHH w/glass
bar10dah - Sunday, 9 June, 2013, at 4:13:16 am

Why lower coolant temps in 997.2 & DFIs?
Bruce In Philly (2000 S Boxster, now '09 C2S) - Friday, 7 June, 2013, at 1:58:35 pm

My DFI warms to 200 and stays there. Given interpretation of the 01's analog gauge, it seems close.
Laz - Friday, 7 June, 2013, at 2:59:25 pm

Re: My DFI warms to 200 and stays there. Given interpretation of the 01's analog gauge, it seems close.
Lawdevil & CURVN8R - Friday, 7 June, 2013, at 5:05:05 pm

Saw about 245 in Austin stop & go; air temp gauge 130+, and occasionally up to 240 elsewhere. NM
Laz - Friday, 7 June, 2013, at 6:13:17 pm

The opening temperature of the t-stat does not control the temperature at which...
MarcW - Saturday, 8 June, 2013, at 11:33:22 am

Never believe everything you read on the internet..... I will set you straight, Stereo Installation
Petee_C - Friday, 7 June, 2013, at 11:34:36 am

ADMIN! - Please post the Radio info/price in the "for sale" section. NM
Boxsterra - Friday, 7 June, 2013, at 12:41:25 pm

Bike Rack
jeff in VA - Thursday, 6 June, 2013, at 3:21:06 pm

Re: Bike Rack
BoxsterBob - San Carlos - Thursday, 6 June, 2013, at 3:34:32 pm

I had the willwood system. Pics here.
Bruce In Philly (2000 S Boxster, now '09 C2S) - Thursday, 6 June, 2013, at 4:22:37 pm

Re: Bike Rack
AndyInNYC - Thursday, 6 June, 2013, at 4:21:04 pm

Re: Bike Rack
jeff in VA - Thursday, 6 June, 2013, at 6:29:32 pm

CURVEN8R2
Guenter in Ontario - Thursday, 23 May, 2013, at 11:39:34 am

I like your long range planning
SteveJ (2010 987 base, manual trans) - Thursday, 23 May, 2013, at 1:19:54 pm

Re: I like your long range planning
Guenter in Ontario - Thursday, 23 May, 2013, at 3:42:42 pm

Awesome Guenter!
jg wnc - Thursday, 23 May, 2013, at 2:37:45 pm

Re: Awesome Guenter!
Guenter in Ontario - Thursday, 23 May, 2013, at 3:44:04 pm

Quite nice, BUT.........
Gary in SoFL - Thursday, 23 May, 2013, at 3:35:53 pm

Re: Quite nice, BUT.........
Guenter in Ontario - Thursday, 23 May, 2013, at 4:27:35 pm

Re: Quite nice, BUT.........
Gary in SoFL - Thursday, 23 May, 2013, at 4:48:01 pm

Re: Quite nice, BUT.........
Ryan_K - Wednesday, 5 June, 2013, at 11:11:23 am

Re: Quite nice, BUT.........
Guenter in Ontario - Wednesday, 5 June, 2013, at 12:48:38 pm

Re: Quite nice, BUT.........
Ryan_K - Thursday, 6 June, 2013, at 3:35:49 pm

Re: Quite nice, BUT.........
Gary in SoFL - Thursday, 6 June, 2013, at 5:32:26 pm

Re: ultra low profile tires
Petee_C - Friday, 24 May, 2013, at 3:04:56 pm

Re: ultra low profile tires
Guenter in Ontario - Friday, 24 May, 2013, at 4:02:07 pm

Re: ultra low profile tires
Laz - Friday, 24 May, 2013, at 4:46:09 pm

Re: ultra low profile tires
Guenter in Ontario - Friday, 24 May, 2013, at 5:03:27 pm

Sport suspension, 20" wheels etc.
Roger987 - Saturday, 25 May, 2013, at 10:15:48 am

Re: Sport suspension, 20" wheels etc.
Guenter in Ontario - Saturday, 25 May, 2013, at 10:29:05 am

Re: Sport suspension, 20" wheels etc.
Roger987 - Saturday, 25 May, 2013, at 8:30:49 pm

Re: Sport suspension, 20" wheels etc.
Guenter in Ontario - Saturday, 25 May, 2013, at 8:40:11 pm

Sweet Mother of .....
Roger987 - Thursday, 23 May, 2013, at 3:50:46 pm

Re: Sweet Mother of .....
Guenter in Ontario - Thursday, 23 May, 2013, at 4:31:30 pm

Congratulations Guenter, great post and can hardly wait to see your new Boxster NM
DougW - Thursday, 23 May, 2013, at 5:19:54 pm

Re: CURVEN8R2
richard986pei - Thursday, 23 May, 2013, at 6:36:32 pm

Re: CURVEN8R2
Guenter in Ontario - Thursday, 23 May, 2013, at 11:46:15 pm

Re: CURVEN8R2
jwdbox - Thursday, 23 May, 2013, at 7:22:39 pm

Congrats....I think June 2013 will also have 100 days NM
newt - Thursday, 23 May, 2013, at 9:04:07 pm

Re: Congrats....I think June 2013 will also have 100 days ...and then there's July... NM
Guenter in Ontario - Thursday, 23 May, 2013, at 11:47:44 pm

Re: CURVEN8R2
CarreraLicious - Friday, 24 May, 2013, at 6:03:47 am

!!! NM
Laz - Friday, 24 May, 2013, at 7:42:53 am

Re: CURVEN8R2
Lawdevil & CURVN8R - Sunday, 26 May, 2013, at 9:08:40 pm

Go 'all in' and take euro delivery??!!
jlegelis - Wednesday, 5 June, 2013, at 2:44:37 pm

Re: Go 'all in' and take euro delivery??!!
Guenter in Ontario - Wednesday, 5 June, 2013, at 4:32:43 pm

Re: CURVEN8R2
m4240z - Thursday, 6 June, 2013, at 4:23:17 pm

Ghia
Laz - Thursday, 6 June, 2013, at 4:42:31 pm

Ball Joint seperator / puller?
grant - Wednesday, 29 May, 2013, at 3:30:26 pm

Not what I'd use. That's a gear/pulley puller...
MarcW - Wednesday, 29 May, 2013, at 3:40:44 pm

I'm very familiar with both
grant - Wednesday, 29 May, 2013, at 3:57:11 pm

Well, unless the ball joints on the Boxster are hybrids because that is the wrong tool...
MarcW - Wednesday, 29 May, 2013, at 6:14:34 pm

Well, the ball joints (one BJ, one TRE)....
grant - Wednesday, 29 May, 2013, at 7:56:05 pm

If the puller works for you fine. The times I watched the ball joints being separated...
MarcW - Thursday, 30 May, 2013, at 7:21:41 am

Re: If the puller works for you fine. The times I watched the ball joints being separated...
Trygve (San Francisco, CA) - Thursday, 30 May, 2013, at 4:45:20 pm

thanks! NM
grant - Thursday, 30 May, 2013, at 7:22:53 pm

Re: Ball Joint seperator / puller?
Rob in CO - Wednesday, 29 May, 2013, at 4:19:58 pm

Axle nuts
Rob in CO - Wednesday, 29 May, 2013, at 4:26:22 pm

Does anyone know why they cannot be re-used?
grant - Wednesday, 29 May, 2013, at 4:44:11 pm