Main Forum

Discussion of Boxsters and other Porsches

Announcements		Last Post
	Instructions for posting photos (NEW & IMPROVED)	10/22/2011 09:51AM
	Our Rules	11/11/2010 04:00PM

Buying through this link, gets PB a donation.	Products for your Boxster, Cayman and Carrera.

Page 150 of 215 Pages:

145 146 147 148 149150151 152 153 154

Forum List New Topic RSS

Post	Views
Anyone have a list of industry part numbers for repalcement bulbs? grant - Thursday, 24 May, 2012, at 11:46:12 am	1,497
Sylvania does... Burg Boxster - Thursday, 24 May, 2012, at 11:52:06 am	915
thanks, Burg! Now, can you confirm...? grant - Thursday, 24 May, 2012, at 12:17:24 pm	925
No, separate... Burg Boxster - Thursday, 24 May, 2012, at 12:33:01 pm	942
Not only are they different Boxsterra - Thursday, 24 May, 2012, at 12:36:34 pm	914
Be aware that 986 Litronics use 6W park bulbs, not the 5W as with halogen headlight assemblies. Laz - Thursday, 24 May, 2012, at 1:01:25 pm	1,001
Yes mikefocke, '01S Sanford, NC - Thursday, 24 May, 2012, at 8:44:26 pm	907
Hmm, you've got 6W parks for both headlight types, which is ok anyway. *NM* Laz - Thursday, 24 May, 2012, at 8:49:22 pm	895
Wonderful. Shoudl have known :-) *NM* grant - Friday, 25 May, 2012, at 9:09:38 am	902
Re: Anyone have a list of industry part numbers for repalcement bulbs? chrismmm - Thursday, 31 May, 2012, at 7:03:03 am	999
Apparition Laz - Wednesday, 30 May, 2012, at 8:52:44 pm	1,221
The car she's wearing out.... MarcW - Tuesday, 29 May, 2012, at 6:58:03 pm	1,618
Good to hear Marc, I'm doing a test session DougW - Wednesday, 30 May, 2012, at 4:37:57 pm	785
Sweet. I dropped off the oil for the Boxster this AM and spoke with the SM... MarcW - Wednesday, 30 May, 2012, at 5:20:59 pm	794
The rep training mikefocke, '01S Sanford, NC - Wednesday, 30 May, 2012, at 5:59:54 pm	751
Looking for a DYI for dash bulb replacement Bobtesa - Tuesday, 29 May, 2012, at 8:07:46 pm	1,300
The link that used to have the best guide is dead Boxsterra - Tuesday, 29 May, 2012, at 8:36:45 pm	733
Roock Porsche richardinatlanta - Tuesday, 22 May, 2012, at 11:08:56 am	1,932
Re: Roock Porsche jg wnc - Wednesday, 23 May, 2012, at 8:27:58 am	982
Re: Roock Porsche richardinatlanta - Saturday, 26 May, 2012, at 6:36:48 pm	908
Don't live in that area, so I don't know of anyone else. *NM* jg wnc - Tuesday, 29 May, 2012, at 2:33:32 pm	944
Also check Freed Performance in Cumming GA if convenient Eric (Plug Guy) - Sunday, 27 May, 2012, at 10:53:18 pm	1,150
Re: Also check Freed Performance in Cumming GA if convenient richardinatlanta - Monday, 28 May, 2012, at 8:36:01 pm	961
60k Service tips for 986? DanV - Monday, 28 May, 2012, at 10:39:20 am	1,616
Send me your email address and I'll reply with a PDF of a two page... MarcW - Monday, 28 May, 2012, at 1:40:09 pm	838
Big items are filters seep belt oil. NoNe of which are much work *NM* grant - Monday, 28 May, 2012, at 2:30:40 pm	894
See here (FAQ) Boxsterra - Monday, 28 May, 2012, at 9:29:49 pm	966
Feedback on an Indy repair facility in San Antonio or Austin Ponyrider - Monday, 28 May, 2012, at 7:39:10 pm	1,509
I posted before about a noise from the driver's side rear wheel... Tony in Whittier - Saturday, 26 May, 2012, at 4:29:02 pm	1,464
In spite of what you've previously reported, it still could be wheel bearing(s.) *NM* Laz - Saturday, 26 May, 2012, at 5:03:22 pm	1,026
In my limited experience with wheel bearings they get louder with age tom coughlin - Saturday, 26 May, 2012, at 8:14:14 pm	1,133
If you believe Occam's Razor ... Pedro (Odessa, FL) - Sunday, 27 May, 2012, at 10:42:54 am	1,160
Tires can become noisy w/ wear, even before hitting the wear bars. Look for tread block scalloping. Laz - Sunday, 27 May, 2012, at 2:19:13 pm	2,004
I had my rear howling wheel bearings done last Nov and now I can hear the sweet exhaust.... *NM* Motobob - Sunday, 27 May, 2012, at 4:11:45 pm	1,223
Sure sounds like a wheel bearing. *NM* MikelSr - Sunday, 27 May, 2012, at 6:34:56 pm	1,032
Try switching the rear wheels..I thought I had a wheel bearing problem.. Kimo - Monday, 28 May, 2012, at 6:43:23 pm	1,003
Good news, bad news! Lawdevil & CURVN8R - Monday, 28 May, 2012, at 3:36:28 pm	1,433
Sounds like good news, good news... Dave In MD - Monday, 28 May, 2012, at 3:44:42 pm	934
Re: Sounds like good news, good news... carlos in Montreal - Monday, 28 May, 2012, at 6:29:27 pm	904
Removing wheels - there must be an easier way Greg - Wednesday, 16 May, 2012, at 10:35:39 pm	1,741
Re: Removing wheels - there must be an easier way 986rgt - Wednesday, 16 May, 2012, at 10:42:35 pm	1,167
Re: Removing wheels - there must be an easier way Greg - Wednesday, 16 May, 2012, at 10:53:30 pm	1,017
What Steve said. I watch the techs and they always remove a couple of wheel bolts... MarcW - Wednesday, 16 May, 2012, at 10:47:15 pm	1,030
Re: What Steve said. I watch the techs and they always remove a couple of wheel bolts... Petee_C - Monday, 28 May, 2012, at 12:21:53 am	1,051
Re: Removing wheels - there must be an easier way John B in SC - Friday, 18 May, 2012, at 12:20:50 pm	1,103
Re: Removing wheels - there must be an easier way Greg - Friday, 18 May, 2012, at 12:33:07 pm	993
Re: Removing wheels - there must be an easier way San Rensho - Friday, 18 May, 2012, at 8:56:19 pm	1,004
Re: Removing wheels - there must be an easier way Tom (Powell, OH) - Sunday, 20 May, 2012, at 9:03:50 am	1,011
put anti-seize on the hub - that keeps it from sticking. Then grant - Monday, 21 May, 2012, at 9:50:46 pm	1,922
Whistling from gas cap area steve_wilwerding - Monday, 21 May, 2012, at 10:06:48 am	2,000
I have the same issue Kimo - Monday, 21 May, 2012, at 11:00:34 am	989
That's what the radio is for *NM* Lawdevil & CURVN8R - Monday, 21 May, 2012, at 11:20:13 am	987
that reminds me...upgrade my radio *NM* Kimo - Monday, 21 May, 2012, at 1:24:54 pm	953
a comment..... por911(bc) - Monday, 21 May, 2012, at 1:18:58 pm	987
Yes - I plan on checking that one out too, thanks Kimo - Monday, 21 May, 2012, at 1:26:31 pm	1,041
Re: Whistling from gas cap area Thierry, Quebec City, Canada - Tuesday, 22 May, 2012, at 9:00:20 am	1,019
It wasn't my fuel cap... Kimo - Saturday, 26 May, 2012, at 7:48:25 pm	995
The Porsche Wave Laz - Thursday, 24 May, 2012, at 8:39:37 pm	1,751
Re: The Porsche Wave KevinR-MedinaOhio - Friday, 25 May, 2012, at 12:55:20 pm	901
Not sure myself. *NM* Laz - Saturday, 26 May, 2012, at 1:28:02 pm	884
Re: The Porsche Wave KevinR-MedinaOhio - Friday, 25 May, 2012, at 5:33:42 pm	845
Oil Level Indicator Question Mark from SC - Thursday, 24 May, 2012, at 6:56:48 am	2,350
Re: Oil Level Indicator Question jwdbox - Thursday, 24 May, 2012, at 7:41:06 am	1,451
Actually, the porsche spec is to measure at operating temp. grant - Thursday, 24 May, 2012, at 11:31:49 am	1,722
Re: Oil Level Indicator Question Mark from SC - Thursday, 24 May, 2012, at 7:46:45 am	1,136
Re: Oil Level Indicator Question jwdbox - Thursday, 24 May, 2012, at 8:15:44 am	1,719
Re: Oil Level Indicator Question gedwin - Thursday, 24 May, 2012, at 11:09:02 am	1,078
They all should be checked warm. 99% of other makes and models too. grant - Thursday, 24 May, 2012, at 11:43:03 am	1,164
Re: They all should be checked warm. 99% of other makes and models too. gedwin - Friday, 25 May, 2012, at 2:12:38 pm	1,587
Interesting. 987s wont even give a [wrong] reading cold? My point was that its not just 987s grant - Friday, 25 May, 2012, at 2:40:27 pm	1,304
My 06 987 will give a reading hot or cold Guenter in Ontario - Friday, 25 May, 2012, at 5:20:37 pm	1,356
Re: My 06 987 will give a reading hot or cold jwdbox - Friday, 25 May, 2012, at 5:42:44 pm	1,767
A flashing oil level indicator is a sign the level is low. I occasionally see this... MarcW - Thursday, 24 May, 2012, at 2:31:06 pm	1,490
Thanks for all the information.... Mark from SC - Friday, 25 May, 2012, at 2:50:45 pm	1,504
if the oil is viscous (thick, cold) and has been recently run - an hour is typical. *NM* grant - Friday, 25 May, 2012, at 8:19:10 pm	1,659
DIY guide to remove center console & install short shift kit - 987 Cris - Saturday, 19 May, 2012, at 4:44:35 pm	5,874
Re:Nire write up ,,tks *NM* carlos in Montreal - Sunday, 20 May, 2012, at 3:03:13 pm	1,643
Thanks very much for preparing and posting this very useful guide. *NM* Roger987 - Sunday, 20 May, 2012, at 10:28:56 pm	1,853
Roger, have you got yours installed yet? Guenter in Ontario - Sunday, 20 May, 2012, at 11:37:27 pm	1,587
Re: Roger, have you got yours installed yet? Roger987 - Monday, 21 May, 2012, at 10:42:28 am	1,459
Sounds like opportunity for hands-on tech session @ BRBS. (NM) *NM* Cris - Monday, 21 May, 2012, at 11:27:57 am	1,582
Re: Roger, have you got yours installed yet? Gary in SoFL - Monday, 21 May, 2012, at 12:55:46 pm	1,487
W*rk ??? Roger987 - Tuesday, 22 May, 2012, at 10:45:41 pm	1,437
Re: W*rk ??? Gary in SoFL - Wednesday, 23 May, 2012, at 10:40:03 am	1,427
Is "rtired" a four letter word, too? NM* Laz - Wednesday, 23 May, 2012, at 12:02:42 pm	1,536
Only for those not there yet *NM* Gary in SoFL - Wednesday, 23 May, 2012, at 12:10:20 pm	1,576
All too often even during it! *NM* Laz - Wednesday, 23 May, 2012, at 1:46:58 pm	1,602
Re: Is "r*tired" a four letter word, too? Guenter in Ontario - Wednesday, 23 May, 2012, at 4:49:17 pm	1,632
A Kant u kan kount on Laz - Wednesday, 23 May, 2012, at 5:40:21 pm	1,727
Re: W*rk ??? Guenter in Ontario - Wednesday, 23 May, 2012, at 4:46:40 pm	1,472
Maybe you have time to read this: Laz - Wednesday, 23 May, 2012, at 5:42:29 pm	1,520
I will when I r*tire. Guenter in Ontario - Wednesday, 23 May, 2012, at 6:53:44 pm	1,637
Wrk fascinates me; I can sit and watch it for hours... NM* Roger987 - Wednesday, 23 May, 2012, at 10:46:29 pm	1,799
Re: Roger, have you got yours installed yet? Guenter in Ontario - Monday, 21 May, 2012, at 4:16:01 pm	1,570
Re: DIY guide to remove center console & install short shift kit - 987 Mark from SC - Monday, 21 May, 2012, at 3:11:15 pm	1,793
Re: DIY guide to remove center console & install short shift kit - 987 chrismmm - Monday, 21 May, 2012, at 6:17:07 pm	1,592
Mark, you may want to check if someone @ BRBS can help with install Cris - Thursday, 24 May, 2012, at 12:48:21 am	1,644
Indeed, bring it to BRBS *NM* Boxsterra - Friday, 25 May, 2012, at 9:06:17 am	1,529
And if anyone wants this done on the 987/997 - I can certain help @ BRBS. Cris - Friday, 25 May, 2012, at 10:57:39 am	1,718
Agreed, definitely do take to BRBS for install. Having done SSK in both 9x6 and 9x7... Burg Boxster - Friday, 25 May, 2012, at 11:28:56 am	1,631
You mean this? Laz - Friday, 25 May, 2012, at 11:49:31 am	1,618
Gorgeous and though also from Stuttgart... Burg Boxster - Friday, 25 May, 2012, at 1:05:23 pm	1,422
Short, Shorter, Shortest ... Pedro (Odessa, FL) - Friday, 25 May, 2012, at 5:47:03 pm	1,754
2,500 mile road trip about to begin - any advice? Dunkirk - Sunday, 20 May, 2012, at 2:11:13 am	2,430
Re: 2,500 mile road trip about to begin - any advice? Guenter in Ontario - Sunday, 20 May, 2012, at 10:10:30 am	1,564
Re: 2,500 mile road trip about to begin - any advice? hoppy44 - Monday, 21 May, 2012, at 11:23:10 am	1,846
Re: 2,500 mile road trip about to begin - any advice? Eric in Lincoln - Monday, 21 May, 2012, at 12:44:55 pm	2,100
Plenty of bottled water. I pack pretzels, nuts to snack on. I pack a blanket and some small ... MarcW - Monday, 21 May, 2012, at 2:13:36 pm	1,533
Re: Plenty of bottled water. I pack pretzels, nuts to snack on. I pack a blanket and some small ... chrismmm - Monday, 21 May, 2012, at 6:22:03 pm	1,961
V-1 is good, but I prefer the Escort 9500ix Lawdevil & CURVN8R - Monday, 21 May, 2012, at 7:38:26 pm	1,445
Re: V-1 is good, but I prefer the Escort 9500ix chrismmm - Tuesday, 22 May, 2012, at 4:39:05 am	1,547
Re: V-1 is good, but I prefer the Escort 9500ix Lawdevil & CURVN8R - Tuesday, 22 May, 2012, at 10:56:49 am	1,318
Just the place for LE to hang out, and the V1's bogey counter can mitigate the danger. *NM* Laz - Friday, 25 May, 2012, at 11:08:37 am	1,498
Not a problem with the Escort Lawdevil & CURVN8R - Friday, 25 May, 2012, at 12:57:35 pm	1,534
I'm a BIG fan of the V1... Pedro (Odessa, FL) - Tuesday, 22 May, 2012, at 10:29:31 am	1,534
It's another line of defense, but exogenous info sources depend on how thorough the reportage is. *NM* Laz - Friday, 25 May, 2012, at 11:13:59 am	1,358
I've only every owned a V1 so I can't say for sure it is the one to have but I've been... MarcW - Monday, 21 May, 2012, at 7:52:45 pm	1,563
Re: I've only every owned a V1 so I can't say for sure it is the one to have but I've been... chrismmm - Tuesday, 22 May, 2012, at 4:41:09 am	1,288
a comment.... por911(bc) - Monday, 21 May, 2012, at 2:16:12 pm	1,461
How about a gallon of distilled water in the frunk to compliment you quart of oil? dghii - Monday, 21 May, 2012, at 10:31:02 pm	1,600
On one of my long road trips (MA to FL) I found that tom coughlin - Tuesday, 22 May, 2012, at 8:56:55 am	1,508
Some variables: seat type, driving position, body parameters. *NM* Laz - Tuesday, 22 May, 2012, at 9:49:39 am	1,586
Gel Seat - Which one did you get? *NM* Ed fromTampa ( formerly Long Island) - Friday, 25 May, 2012, at 8:45:44 am	1,415
Anyone know a DIY link to changing the fluids in a Tiptronic for a 2000 Boxster S, thanks. *NM* Naples986 - Sunday, 20 May, 2012, at 11:21:06 am	1,727
Send me a private email with an email address.. MarcW - Monday, 21 May, 2012, at 2:36:49 pm	905
it looks like Marc has a PDF for you. However... grant - Monday, 21 May, 2012, at 9:47:24 pm	928
Re: it looks like Marc has a PDF for you. However... Naples986 - Tuesday, 22 May, 2012, at 11:34:33 am	976
Sorry i saw thsi late. Back from long track weekend. grant - Wednesday, 23 May, 2012, at 11:17:38 am	910
Thanks Grant. Hope you enjoyed your track time. *NM* Naples986 - Wednesday, 23 May, 2012, at 11:36:28 am	1,044
'twas great. Mid-Ohio, and 3 beautiful sunny days. grant - Wednesday, 23 May, 2012, at 1:54:42 pm	964
What's your youtube address again? *NM* Laz - Wednesday, 23 May, 2012, at 2:22:24 pm	949
here ya go! grant - Thursday, 24 May, 2012, at 11:44:32 am	932
Nice work, grant. Where's the Wave? *NM* Laz - Thursday, 24 May, 2012, at 8:51:16 pm	937
Wave? *NM* grant - Friday, 25 May, 2012, at 9:10:21 am	899
It's a vague reference to the Porsche Wave post. It's an in cockpit Nürburgring video you'll enjoy. *NM* Laz - Friday, 25 May, 2012, at 11:06:24 am	970
if i see an oncoming porsche on the rcetrack i'll do more than wave !!!!!!! *NM* grant - Friday, 25 May, 2012, at 11:23:48 am	936
Weave instead of wave! *NM* Laz - Friday, 25 May, 2012, at 11:43:44 am	939
Found section 39-A7 in my hardcopy Boxster factory manuals and made a PDF and sent... MarcW - Wednesday, 23 May, 2012, at 3:14:02 pm	974
Hey, Maurice Roger987 - Wednesday, 23 May, 2012, at 10:56:00 pm	1,622
Re: Hey, Maurice MauriceonLongIsland - Wednesday, 23 May, 2012, at 11:29:17 pm	1,040
Rog,ever consider...working on your car at home? It's usually much more convenient LOL Burg Boxster - Thursday, 24 May, 2012, at 8:07:53 am	950
Re: Rog,ever consider...working on your car at home? It's usually much more convenient LOL Roger987 - Thursday, 24 May, 2012, at 9:33:56 am	954
My apologies, Abe... Burg Boxster - Thursday, 24 May, 2012, at 11:45:08 am	917
Re: My apologies, Abe... Roger987 - Thursday, 24 May, 2012, at 10:42:52 pm	923
Let's help Pedro - Bad jokes Day Guenter in Ontario - Friday, 18 May, 2012, at 9:45:49 am	2,491
Re: Let's help Pedro - Bad jokes Day db997S - Friday, 18 May, 2012, at 10:47:57 am	1,463
Re: Let's help Pedro - Bad jokes Day KevinR-MedinaOhio - Friday, 18 May, 2012, at 10:59:28 am	1,755
If a man is alone in the woods..... Bruce In Philly (2000 S Boxster, now '09 C2S) - Friday, 18 May, 2012, at 11:50:53 am	2,377
Re: If a man is alone in the woods..... Ed fromTampa ( formerly Long Island) - Saturday, 19 May, 2012, at 7:44:59 am	2,282
Re: Let's help Pedro - Bad jokes Day Gary in SoFL - Friday, 18 May, 2012, at 12:21:51 pm	1,371
Been saving these... MarcW - Friday, 18 May, 2012, at 1:39:19 pm	1,881
Re: Let's help Pedro - Bad jokes Day Harvey in FL - Friday, 18 May, 2012, at 8:38:25 pm	1,678
Re: Let's help Pedro - Bad jokes Day dghii - Friday, 18 May, 2012, at 11:19:43 pm	1,913
Re: Let's help Pedro - Bad jokes Day dghii - Friday, 18 May, 2012, at 11:27:42 pm	1,876
Re: Let's help Pedro - Bad jokes Day San Rensho - Saturday, 19 May, 2012, at 9:56:57 pm	1,813
The saga of Jack Robbie Boxsterra - Tuesday, 22 May, 2012, at 12:25:06 am	1,718
LOL.... Gary in SoFL - Tuesday, 22 May, 2012, at 2:24:11 am	1,597
Funny! But....... Bruce In Philly (2000 S Boxster, now '09 C2S) - Tuesday, 22 May, 2012, at 2:50:47 pm	1,727
It is a great blessing to be able to laugh at your own misfortunes. Gary in SoFL - Tuesday, 22 May, 2012, at 7:44:43 pm	2,110
Wow; the original case of Schadenfreude! *NM* Laz - Tuesday, 22 May, 2012, at 8:59:23 pm	1,496
Re: Let's help Pedro - Bad jokes Day hoppy44 - Tuesday, 22 May, 2012, at 5:38:53 pm	2,110
Wouldn't that be 'stallionhood'? *NM* Roger987 - Thursday, 24 May, 2012, at 12:01:46 am	1,470
Boxsters on the Blue Ridge Parkway - a Friday Scan Day invitation Roger987 - Tuesday, 22 May, 2012, at 11:11:37 pm	1,801
Re: Boxsters on the Blue Ridge Parkway - a Friday Scan Day invitation Guenter in Ontario - Tuesday, 22 May, 2012, at 11:18:19 pm	890
Nice shot Roger *NM* DougW - Tuesday, 22 May, 2012, at 11:40:24 pm	943
Re: Boxsters on the Blue Ridge Parkway - a Friday Scan Day invitation MauriceonLongIsland - Tuesday, 22 May, 2012, at 11:50:39 pm	965
Very nice, commercial quality car shot. Laz - Wednesday, 23 May, 2012, at 12:06:10 pm	919
Thanks guys ! *NM* Roger987 - Wednesday, 23 May, 2012, at 10:47:09 pm	964
A Note for Motive Owners Al in Melbourne Beach - Monday, 21 May, 2012, at 11:08:55 pm	2,237
Re: A Note for Motive Owners Pedro (Odessa, FL) - Tuesday, 22 May, 2012, at 2:00:26 pm	1,312
But not the regular supermarket stuff, which has water and probably a lubricant in it, Laz - Tuesday, 22 May, 2012, at 4:33:28 pm	1,340
A Note for Motive Owners Part Deux Al in Melbourne Beach - Tuesday, 22 May, 2012, at 9:23:49 pm	1,649
Re: A Note for Motive Owners Part Deux San Rensho - Tuesday, 22 May, 2012, at 9:48:12 pm	1,367
That's what I do Boxsterra - Wednesday, 23 May, 2012, at 9:32:10 am	1,520
For a quick bleed, its fine. However it is dangerous in two cases: grant - Wednesday, 23 May, 2012, at 1:59:39 pm	1,338
Not applicable for modern Porsches though Boxsterra - Wednesday, 23 May, 2012, at 6:28:15 pm	1,293
Ouch! Sorry to hear of the troubles Al. jg wnc - Wednesday, 23 May, 2012, at 8:22:14 am	1,473
my concern with speed bleeders and thier ilk is..... grant - Wednesday, 23 May, 2012, at 1:57:27 pm	1,434
I have never had a problem with air getting into the system..... ever jg wnc - Wednesday, 23 May, 2012, at 3:09:41 pm	1,468
Not the point - they can leak minute amounts of air when there is vacuum. grant - Wednesday, 23 May, 2012, at 9:26:22 pm	1,542
Agree with this 100% and... grant - Wednesday, 23 May, 2012, at 11:13:01 am	1,126
Pujun? Lawdevil & CURVN8R - Wednesday, 23 May, 2012, at 11:26:12 am	1,581
Re: Pujun? Laz - Wednesday, 23 May, 2012, at 12:01:35 pm	818
Re: Pujun? db997S - Wednesday, 23 May, 2012, at 1:33:21 pm	814
Along those lines, "Macan" is Indonesian for "tiger." *NM* Laz - Wednesday, 23 May, 2012, at 1:44:50 pm	783
Taxi Spec mikefocke, '01S Sanford, NC - Wednesday, 23 May, 2012, at 4:07:50 pm	823
A German Checker Laz - Wednesday, 23 May, 2012, at 5:46:12 pm	820
Now that I have some extra time on my hands, I think I'll build a Bugatti Veyron... Pedro (Odessa, FL) - Sunday, 20 May, 2012, at 9:04:34 pm	1,933
It'll be a lot easier on your back than building a real car. Looks like fun, and looks Laz - Sunday, 20 May, 2012, at 9:42:12 pm	1,063
Pedro, If we bought some of your products, would it help you heal faster? *NM* Ed B - Monday, 21 May, 2012, at 8:51:24 am	1,095
I've been assembling some of the TechnoPower and TechnoPower2 Kits ... Pedro (Odessa, FL) - Monday, 21 May, 2012, at 9:36:35 am	1,244
If would help him underwrite the expenses to keep this "free" site up.... Gary in SoFL - Monday, 21 May, 2012, at 12:52:19 pm	1,249
Re: Pedro, If we bought some of your products, would it help you heal faster? Jaay - Tuesday, 22 May, 2012, at 5:11:39 pm	1,139
I was just wondering what would happen to this year's limited edition PB gear. Way to go Gary *NM* Naples986 - Monday, 21 May, 2012, at 7:52:54 pm	1,110
Re: Fuel Bib KevinR-MedinaOhio - Tuesday, 22 May, 2012, at 6:59:59 am	1,142
Double negative Kevin, but urinating on your hands and feet is quite healthy, or so I'm told Gary in SoFL - Tuesday, 22 May, 2012, at 12:24:53 pm	1,100
Re: Bibs KevinR-MedinaOhio - Tuesday, 22 May, 2012, at 4:14:36 pm	1,086
Had one, but it was too much of a pain in the neck. *NM* Laz - Tuesday, 22 May, 2012, at 4:29:04 pm	987
Had one, always felt safer with it...pump nozzle wouldn't scratch mikefocke, '01S Sanford, NC - Tuesday, 22 May, 2012, at 5:16:24 pm	1,193
Re: Bibs Ed B - Wednesday, 23 May, 2012, at 9:08:18 am	1,048
Soft Top getready - Tuesday, 22 May, 2012, at 7:21:28 pm	1,751
Re: Soft Top bar10dah - Tuesday, 22 May, 2012, at 11:41:34 pm	1,110
Re: Soft Top MauriceonLongIsland - Tuesday, 22 May, 2012, at 11:48:36 pm	937
Original Design. jpv42 - Monday, 21 May, 2012, at 2:42:20 pm	2,152
Re: Original Design. db997S - Monday, 21 May, 2012, at 3:22:35 pm	1,414
Re: Original Design. paulwdenton - Tuesday, 22 May, 2012, at 7:57:04 am	1,019
Re: Original Design. silverbox03 - Tuesday, 22 May, 2012, at 10:36:08 pm	1,201
throughs? Otherwise... invaluable contribution *NM* Burg Boxster - Monday, 21 May, 2012, at 4:23:38 pm	1,399
Re: Original Design. chrismmm - Monday, 21 May, 2012, at 6:14:49 pm	1,200
Re: Original Design. chrismmm - Monday, 21 May, 2012, at 6:16:03 pm	1,270
Close it why? He's entitled to his opinion and likewise PB members are entitled... Burg Boxster - Monday, 21 May, 2012, at 6:53:54 pm	1,660
Re: Close it why? He's entitled to his opinion and likewise PB members are entitled... Gary in SoFL - Monday, 21 May, 2012, at 7:18:05 pm	1,414
Butt, I love them all !!! *NM* Roger987 - Tuesday, 22 May, 2012, at 10:45:28 am	1,194
+1 *NM* Lawdevil & CURVN8R - Tuesday, 22 May, 2012, at 10:58:26 am	1,204
You guys are just 'but' men.... Gary in SoFL - Tuesday, 22 May, 2012, at 12:29:03 pm	1,302
uh... are we still talking about cars? Dave In MD - Tuesday, 22 May, 2012, at 2:23:13 pm	1,284
Oh, sure...we'll drink beer until no one gives a flying rats as, except maybe chrismmm NM* Gary in SoFL - Tuesday, 22 May, 2012, at 7:36:10 pm	1,154
Re: Oh, sure...we'll drink beer until no one gives a flying rats as*, except maybe chrismmm chrismmm - Tuesday, 22 May, 2012, at 9:20:42 pm	1,272
Jig-a-Clean waterless ragless hand cleaner Boxsterra - Tuesday, 22 May, 2012, at 8:28:46 pm	2,055
No, but I'd like to meet the person who signed off on the product and company names. *NM* Laz - Tuesday, 22 May, 2012, at 8:57:10 pm	768
A Stop Sign for Libertarians Tino - Monday, 21 May, 2012, at 8:42:30 pm	1,849
If a sign is put up where there's no one to read it, does it say anything? *NM* Laz - Monday, 21 May, 2012, at 10:46:13 pm	869
To set the record straight... Pedro (Odessa, FL) - Thursday, 17 May, 2012, at 8:16:49 pm	3,321
Re: To set the record straight... jrblackbox - Thursday, 17 May, 2012, at 8:35:33 pm	1,782
Re: To set the record straight... Lawdevil & CURVN8R - Thursday, 17 May, 2012, at 8:38:56 pm	1,846
Re: To set the record straight... ericp - Thursday, 17 May, 2012, at 8:59:12 pm	1,849
Long term, get checked regularly for ruptured discs. Laz - Thursday, 17 May, 2012, at 9:13:33 pm	2,079
Re: To set the record straight... Dave In MD - Thursday, 17 May, 2012, at 9:23:22 pm	1,917
Re: To set the record straight... goldened - Thursday, 17 May, 2012, at 9:28:09 pm	1,966
Re: To set the record straight... newt - Thursday, 17 May, 2012, at 10:29:08 pm	1,962
Pedro take it easy and be patient, let things heal, take care *NM* DougW - Thursday, 17 May, 2012, at 11:00:11 pm	2,134
Re: sorry about your injury; get well *NM* KevinR-MedinaOhio - Friday, 18 May, 2012, at 10:57:33 am	2,186
Re: To set the record straight... Trygve (San Francisco, CA) - Thursday, 17 May, 2012, at 11:02:43 pm	2,086
Get well soon! Make sure that you don't rush things for a complete recovery! Regards, *NM* MauriceonLongIsland - Thursday, 17 May, 2012, at 11:09:27 pm	2,123
Re: To set the record straight... Guenter in Ontario - Thursday, 17 May, 2012, at 11:19:41 pm	2,091
Re: To set the record straight... jwdbox - Thursday, 17 May, 2012, at 11:26:03 pm	1,865
Sorry to hear about your accident Pedro hope you get well soon. *NM* Naples986 - Thursday, 17 May, 2012, at 11:47:52 pm	4,174
ouch take your time and take care *NM* carlos in Montreal - Thursday, 17 May, 2012, at 11:51:50 pm	2,307
Re: To set the record straight... frogster - Friday, 18 May, 2012, at 1:41:16 am	1,922
Re: To set the record straight... chrismmm - Friday, 18 May, 2012, at 4:03:52 am	1,895
All the best, it's good to know you're recovering...much aloha *NM* Kimo - Friday, 18 May, 2012, at 7:03:44 am	2,155
Re: All the best, it's good to know you're recovering...much aloha dennisafrompa - Friday, 18 May, 2012, at 7:33:13 am	2,187
Re: To set the record straight... Jaay - Friday, 18 May, 2012, at 7:43:15 am	1,912
Re: To set the record straight... db997S - Friday, 18 May, 2012, at 8:42:07 am	2,108
... Pedro (Odessa, FL) - Friday, 18 May, 2012, at 9:11:29 am	1,991
Speaking of laughing... Leor ('09S, North of Boston) - Sunday, 20 May, 2012, at 10:56:55 am	2,371
The Next Mod... Mark from SC - Sunday, 20 May, 2012, at 11:08:53 am	2,119
Re: To set the record straight... Wayne in NOLA - Sunday, 20 May, 2012, at 12:59:34 pm	1,782
Re: To set the record straight... Ed B - Friday, 18 May, 2012, at 8:53:27 am	1,965
Re: To set the record straight... Bob O - Friday, 18 May, 2012, at 9:19:21 am	1,785
Major Bummer. Just glad the prognosis is good. When you get well, send the extra drugs my way *NM* atwnsw - Friday, 18 May, 2012, at 10:34:50 am	2,099
Re: To set the record straight... Mark from SC - Friday, 18 May, 2012, at 11:35:25 am	1,823
Re: To set the record straight... Gary in SoFL - Friday, 18 May, 2012, at 12:09:37 pm	1,933
Re: To set the record straight... John B in SC - Friday, 18 May, 2012, at 12:15:03 pm	2,137
Get well soon! *NM* Tony in Whittier - Friday, 18 May, 2012, at 12:30:38 pm	2,175
Re: To set the record straight... Greg - Friday, 18 May, 2012, at 12:33:48 pm	2,133
Get well soon Pedro! *NM* Cris - Friday, 18 May, 2012, at 1:07:57 pm	1,907
Very sorry to hear, Pedro. Best wishes for a speedy recovery. *NM* Carlos (no longer in Vegas) - Friday, 18 May, 2012, at 2:57:06 pm	1,919
Re: To set the record straight... Mixster - Friday, 18 May, 2012, at 3:35:52 pm	1,971
Re: To set the record straight... NoBox - Friday, 18 May, 2012, at 4:32:51 pm	1,878
I thought you were told.... Harvey in FL - Friday, 18 May, 2012, at 4:51:57 pm	2,254
Hope you feel better soon *NM* Ollie - Friday, 18 May, 2012, at 5:22:46 pm	2,051
Wishing you a speedy recovery! Ed(Arizona) - Friday, 18 May, 2012, at 9:43:08 pm	2,276
Eight broken ribs and four cracked vertebrae? dghii - Friday, 18 May, 2012, at 11:08:22 pm	2,725
There IS a woman involved... Pedro (Odessa, FL) - Saturday, 19 May, 2012, at 11:21:15 am	2,089
sorry to read about your injury Pedro. Steve (Morro Bay) - Saturday, 19 May, 2012, at 3:53:02 am	1,922
Yikes! Get well soon. *NM* Ed fromTampa ( formerly Long Island) - Saturday, 19 May, 2012, at 7:47:19 am	1,845
sorry to hear of your accident. best wishes for a smooth recovery! *NM* SMILIN - Saturday, 19 May, 2012, at 3:49:31 pm	15,737
Re: To set the record straight... Al in Melbourne Beach - Saturday, 19 May, 2012, at 4:27:40 pm	1,941
Re: To set the record straight... Tino - Saturday, 19 May, 2012, at 8:56:21 pm	1,892
Sorry to hear that, Pedro MikenOH - Sunday, 20 May, 2012, at 8:27:52 pm	2,013
Best wishes for a full recovery, Pedro *NM* Roger987 - Sunday, 20 May, 2012, at 10:21:20 pm	2,138
Yes, all that was said above - get well soon, follow orders, and having had back problems for Bobtesa - Monday, 21 May, 2012, at 7:16:25 am	2,448
Best wishes Pedro. Get well soon. *NM* Clam - Monday, 21 May, 2012, at 10:31:29 am	2,081
Ouch. Follow docs orders and get well Pedro! *NM* Rey - Monday, 21 May, 2012, at 10:32:59 am	2,114
Get well soon! Best wishes for a speedy recovery! *NM* Gundo - Monday, 21 May, 2012, at 10:37:19 am	2,190
Get well soon - take the pain meds and relax - only way to salvation! nils - Monday, 21 May, 2012, at 3:43:21 pm	1,994
that sounds awful - be well, recover quickly and best to all of you grant - Monday, 21 May, 2012, at 9:43:16 pm	2,010
DIY guide to replace air filter on 987 Cris - Saturday, 19 May, 2012, at 4:41:06 pm	1,681
Excellent instructions. Thanks for posting. *NM* Roger987 - Sunday, 20 May, 2012, at 10:31:02 pm	910
Re: DIY guide to replace air filter on 987 chrismmm - Monday, 21 May, 2012, at 7:01:19 pm	961
Awesomely beautiful blue Boxster depicted in the new issue of Panorama.. Rick (Nashville, TN) - Saturday, 19 May, 2012, at 1:50:00 pm	2,091
Re: Awesomely beautiful blue Boxster depicted in the new issue of Panorama.. KevinR-MedinaOhio - Saturday, 19 May, 2012, at 7:01:59 pm	979
Great looking car, Kevin!.. Rick (Nashville, TN) - Monday, 21 May, 2012, at 6:18:11 pm	945
Re: Awesomely beautiful blue Boxster depicted in the new issue of Panorama.. KevinR-MedinaOhio - Saturday, 19 May, 2012, at 8:41:02 pm	797
Multiple codes & other issues Ollie - Tuesday, 15 May, 2012, at 8:41:53 pm	1,906
P1124/P1126 - oxygen sensing adaptation range 1 (cylinders 1-3/4-6) enrichment limit... MarcW - Wednesday, 16 May, 2012, at 1:55:49 pm	5,388
Re: P1124/P1126 - oxygen sensing adaptation range 1 (cylinders 1-3/4-6) enrichment limit... Ollie - Wednesday, 16 May, 2012, at 4:02:24 pm	1,903
You did not entirely remove the cap from the list of suspects... MarcW - Wednesday, 16 May, 2012, at 4:23:07 pm	1,444
Re: You did not entirely remove the cap from the list of suspects... Ollie - Wednesday, 16 May, 2012, at 8:19:36 pm	1,398
Up to you if you want to replace the sensors. But with 170K miles on the original ones... MarcW - Wednesday, 16 May, 2012, at 10:43:54 pm	1,696
Re: Up to you if you want to replace the sensors. But with 170K miles on the original ones... Ollie - Thursday, 17 May, 2012, at 6:49:39 pm	1,503
Pretty sure I anticipated some difficulty removing the sensors.... MarcW - Thursday, 17 May, 2012, at 11:06:11 pm	1,436
Re: Pretty sure I anticipated some difficulty removing the sensors.... Ollie - Friday, 18 May, 2012, at 5:28:43 pm	1,540
Not trying to pile it on but I believe if you go the remove the exhaust manifold route... MarcW - Friday, 18 May, 2012, at 6:52:00 pm	1,547
Re: Not trying to pile it on but I believe if you go the remove the exhaust manifold route... Ollie - Friday, 18 May, 2012, at 10:26:54 pm	1,467
Re: Not trying to pile it on but I believe if you go the remove the exhaust manifold route... nils - Monday, 21 May, 2012, at 3:36:11 pm	1,540

Forum List New Topic RSS

Page 150 of 215 Pages:

145 146 147 148 149150151 152 153 154

Main Forum

Anyone have a list of industry part numbers for repalcement bulbs? grant - Thursday, 24 May, 2012, at 11:46:12 am

Sylvania does... Burg Boxster - Thursday, 24 May, 2012, at 11:52:06 am

thanks, Burg! Now, can you confirm...? grant - Thursday, 24 May, 2012, at 12:17:24 pm

No, separate... Burg Boxster - Thursday, 24 May, 2012, at 12:33:01 pm

Not only are they different Boxsterra - Thursday, 24 May, 2012, at 12:36:34 pm

Be aware that 986 Litronics use 6W park bulbs, not the 5W as with halogen headlight assemblies. Laz - Thursday, 24 May, 2012, at 1:01:25 pm

Yes mikefocke, '01S Sanford, NC - Thursday, 24 May, 2012, at 8:44:26 pm

Hmm, you've got 6W parks for both headlight types, which is ok anyway. *NM* Laz - Thursday, 24 May, 2012, at 8:49:22 pm

Wonderful. Shoudl have known :-) *NM* grant - Friday, 25 May, 2012, at 9:09:38 am

Re: Anyone have a list of industry part numbers for repalcement bulbs? chrismmm - Thursday, 31 May, 2012, at 7:03:03 am

Apparition Laz - Wednesday, 30 May, 2012, at 8:52:44 pm

The car she's wearing out.... MarcW - Tuesday, 29 May, 2012, at 6:58:03 pm

Good to hear Marc, I'm doing a test session DougW - Wednesday, 30 May, 2012, at 4:37:57 pm

Sweet. I dropped off the oil for the Boxster this AM and spoke with the SM... MarcW - Wednesday, 30 May, 2012, at 5:20:59 pm

The rep training mikefocke, '01S Sanford, NC - Wednesday, 30 May, 2012, at 5:59:54 pm

Looking for a DYI for dash bulb replacement Bobtesa - Tuesday, 29 May, 2012, at 8:07:46 pm

The link that used to have the best guide is dead Boxsterra - Tuesday, 29 May, 2012, at 8:36:45 pm

Roock Porsche richardinatlanta - Tuesday, 22 May, 2012, at 11:08:56 am

Re: Roock Porsche jg wnc - Wednesday, 23 May, 2012, at 8:27:58 am

Re: Roock Porsche richardinatlanta - Saturday, 26 May, 2012, at 6:36:48 pm

Don't live in that area, so I don't know of anyone else. *NM* jg wnc - Tuesday, 29 May, 2012, at 2:33:32 pm

Also check Freed Performance in Cumming GA if convenient Eric (Plug Guy) - Sunday, 27 May, 2012, at 10:53:18 pm

Re: Also check Freed Performance in Cumming GA if convenient richardinatlanta - Monday, 28 May, 2012, at 8:36:01 pm

60k Service tips for 986? DanV - Monday, 28 May, 2012, at 10:39:20 am

Send me your email address and I'll reply with a PDF of a two page... MarcW - Monday, 28 May, 2012, at 1:40:09 pm

Big items are filters seep belt oil. NoNe of which are much work *NM* grant - Monday, 28 May, 2012, at 2:30:40 pm

See here (FAQ) Boxsterra - Monday, 28 May, 2012, at 9:29:49 pm

Feedback on an Indy repair facility in San Antonio or Austin Ponyrider - Monday, 28 May, 2012, at 7:39:10 pm

I posted before about a noise from the driver's side rear wheel... Tony in Whittier - Saturday, 26 May, 2012, at 4:29:02 pm

In spite of what you've previously reported, it still could be wheel bearing(s.) *NM* Laz - Saturday, 26 May, 2012, at 5:03:22 pm

In my limited experience with wheel bearings they get louder with age tom coughlin - Saturday, 26 May, 2012, at 8:14:14 pm

If you believe Occam's Razor ... Pedro (Odessa, FL) - Sunday, 27 May, 2012, at 10:42:54 am

Tires can become noisy w/ wear, even before hitting the wear bars. Look for tread block scalloping. Laz - Sunday, 27 May, 2012, at 2:19:13 pm

I had my rear howling wheel bearings done last Nov and now I can hear the sweet exhaust.... *NM* Motobob - Sunday, 27 May, 2012, at 4:11:45 pm

Sure sounds like a wheel bearing. *NM* MikelSr - Sunday, 27 May, 2012, at 6:34:56 pm

Try switching the rear wheels..I thought I had a wheel bearing problem.. Kimo - Monday, 28 May, 2012, at 6:43:23 pm

Good news, bad news! Lawdevil & CURVN8R - Monday, 28 May, 2012, at 3:36:28 pm

Sounds like good news, good news... Dave In MD - Monday, 28 May, 2012, at 3:44:42 pm

Re: Sounds like good news, good news... carlos in Montreal - Monday, 28 May, 2012, at 6:29:27 pm

Removing wheels - there must be an easier way Greg - Wednesday, 16 May, 2012, at 10:35:39 pm

Re: Removing wheels - there must be an easier way 986rgt - Wednesday, 16 May, 2012, at 10:42:35 pm

Re: Removing wheels - there must be an easier way Greg - Wednesday, 16 May, 2012, at 10:53:30 pm

What Steve said. I watch the techs and they always remove a couple of wheel bolts... MarcW - Wednesday, 16 May, 2012, at 10:47:15 pm

Re: What Steve said. I watch the techs and they always remove a couple of wheel bolts... Petee_C - Monday, 28 May, 2012, at 12:21:53 am

Re: Removing wheels - there must be an easier way John B in SC - Friday, 18 May, 2012, at 12:20:50 pm

Re: Removing wheels - there must be an easier way Greg - Friday, 18 May, 2012, at 12:33:07 pm

Re: Removing wheels - there must be an easier way San Rensho - Friday, 18 May, 2012, at 8:56:19 pm

Re: Removing wheels - there must be an easier way Tom (Powell, OH) - Sunday, 20 May, 2012, at 9:03:50 am

put anti-seize on the hub - that keeps it from sticking. Then grant - Monday, 21 May, 2012, at 9:50:46 pm

Whistling from gas cap area steve_wilwerding - Monday, 21 May, 2012, at 10:06:48 am

I have the same issue Kimo - Monday, 21 May, 2012, at 11:00:34 am

That's what the radio is for *NM* Lawdevil & CURVN8R - Monday, 21 May, 2012, at 11:20:13 am

that reminds me...upgrade my radio *NM* Kimo - Monday, 21 May, 2012, at 1:24:54 pm

a comment..... por911(bc) - Monday, 21 May, 2012, at 1:18:58 pm

Yes - I plan on checking that one out too, thanks Kimo - Monday, 21 May, 2012, at 1:26:31 pm

Re: Whistling from gas cap area Thierry, Quebec City, Canada - Tuesday, 22 May, 2012, at 9:00:20 am

It wasn't my fuel cap... Kimo - Saturday, 26 May, 2012, at 7:48:25 pm

The Porsche Wave Laz - Thursday, 24 May, 2012, at 8:39:37 pm

Re: The Porsche Wave KevinR-MedinaOhio - Friday, 25 May, 2012, at 12:55:20 pm

Not sure myself. *NM* Laz - Saturday, 26 May, 2012, at 1:28:02 pm

Re: The Porsche Wave KevinR-MedinaOhio - Friday, 25 May, 2012, at 5:33:42 pm

Oil Level Indicator Question Mark from SC - Thursday, 24 May, 2012, at 6:56:48 am

Re: Oil Level Indicator Question jwdbox - Thursday, 24 May, 2012, at 7:41:06 am

Actually, the porsche spec is to measure at operating temp. grant - Thursday, 24 May, 2012, at 11:31:49 am

Re: Oil Level Indicator Question Mark from SC - Thursday, 24 May, 2012, at 7:46:45 am

Re: Oil Level Indicator Question jwdbox - Thursday, 24 May, 2012, at 8:15:44 am

Re: Oil Level Indicator Question gedwin - Thursday, 24 May, 2012, at 11:09:02 am

They all should be checked warm. 99% of other makes and models too. grant - Thursday, 24 May, 2012, at 11:43:03 am

Re: They all should be checked warm. 99% of other makes and models too. gedwin - Friday, 25 May, 2012, at 2:12:38 pm

Interesting. 987s wont even give a [wrong] reading cold? My point was that its not just 987s grant - Friday, 25 May, 2012, at 2:40:27 pm

My 06 987 will give a reading hot or cold Guenter in Ontario - Friday, 25 May, 2012, at 5:20:37 pm

Re: My 06 987 will give a reading hot or cold jwdbox - Friday, 25 May, 2012, at 5:42:44 pm

A flashing oil level indicator is a sign the level is low. I occasionally see this... MarcW - Thursday, 24 May, 2012, at 2:31:06 pm

Thanks for all the information.... Mark from SC - Friday, 25 May, 2012, at 2:50:45 pm

if the oil is viscous (thick, cold) and has been recently run - an hour is typical. *NM* grant - Friday, 25 May, 2012, at 8:19:10 pm

DIY guide to remove center console & install short shift kit - 987 Cris - Saturday, 19 May, 2012, at 4:44:35 pm

Re:Nire write up ,,tks *NM* carlos in Montreal - Sunday, 20 May, 2012, at 3:03:13 pm

Thanks very much for preparing and posting this very useful guide. *NM* Roger987 - Sunday, 20 May, 2012, at 10:28:56 pm

Roger, have you got yours installed yet? Guenter in Ontario - Sunday, 20 May, 2012, at 11:37:27 pm

Anyone have a list of industry part numbers for repalcement bulbs?
grant - Thursday, 24 May, 2012, at 11:46:12 am

Sylvania does...
Burg Boxster - Thursday, 24 May, 2012, at 11:52:06 am

thanks, Burg! Now, can you confirm...?
grant - Thursday, 24 May, 2012, at 12:17:24 pm

No, separate...
Burg Boxster - Thursday, 24 May, 2012, at 12:33:01 pm

Not only are they different
Boxsterra - Thursday, 24 May, 2012, at 12:36:34 pm

Be aware that 986 Litronics use 6W park bulbs, not the 5W as with halogen headlight assemblies.
Laz - Thursday, 24 May, 2012, at 1:01:25 pm

Yes
mikefocke, '01S Sanford, NC - Thursday, 24 May, 2012, at 8:44:26 pm

Hmm, you've got 6W parks for both headlight types, which is ok anyway. NM
Laz - Thursday, 24 May, 2012, at 8:49:22 pm

Wonderful. Shoudl have known :-) NM
grant - Friday, 25 May, 2012, at 9:09:38 am

Re: Anyone have a list of industry part numbers for repalcement bulbs?
chrismmm - Thursday, 31 May, 2012, at 7:03:03 am

Apparition
Laz - Wednesday, 30 May, 2012, at 8:52:44 pm

The car she's wearing out....
MarcW - Tuesday, 29 May, 2012, at 6:58:03 pm

Good to hear Marc, I'm doing a test session
DougW - Wednesday, 30 May, 2012, at 4:37:57 pm

Sweet. I dropped off the oil for the Boxster this AM and spoke with the SM...
MarcW - Wednesday, 30 May, 2012, at 5:20:59 pm

The rep training
mikefocke, '01S Sanford, NC - Wednesday, 30 May, 2012, at 5:59:54 pm

Looking for a DYI for dash bulb replacement
Bobtesa - Tuesday, 29 May, 2012, at 8:07:46 pm

The link that used to have the best guide is dead
Boxsterra - Tuesday, 29 May, 2012, at 8:36:45 pm

Roock Porsche
richardinatlanta - Tuesday, 22 May, 2012, at 11:08:56 am

Re: Roock Porsche
jg wnc - Wednesday, 23 May, 2012, at 8:27:58 am

Re: Roock Porsche
richardinatlanta - Saturday, 26 May, 2012, at 6:36:48 pm

Don't live in that area, so I don't know of anyone else. NM
jg wnc - Tuesday, 29 May, 2012, at 2:33:32 pm

Also check Freed Performance in Cumming GA if convenient
Eric (Plug Guy) - Sunday, 27 May, 2012, at 10:53:18 pm

Re: Also check Freed Performance in Cumming GA if convenient
richardinatlanta - Monday, 28 May, 2012, at 8:36:01 pm

60k Service tips for 986?
DanV - Monday, 28 May, 2012, at 10:39:20 am

Send me your email address and I'll reply with a PDF of a two page...
MarcW - Monday, 28 May, 2012, at 1:40:09 pm

Big items are filters seep belt oil. NoNe of which are much work NM
grant - Monday, 28 May, 2012, at 2:30:40 pm

See here (FAQ)
Boxsterra - Monday, 28 May, 2012, at 9:29:49 pm

Feedback on an Indy repair facility in San Antonio or Austin
Ponyrider - Monday, 28 May, 2012, at 7:39:10 pm

I posted before about a noise from the driver's side rear wheel...
Tony in Whittier - Saturday, 26 May, 2012, at 4:29:02 pm

In spite of what you've previously reported, it still could be wheel bearing(s.) NM
Laz - Saturday, 26 May, 2012, at 5:03:22 pm

In my limited experience with wheel bearings they get louder with age
tom coughlin - Saturday, 26 May, 2012, at 8:14:14 pm

If you believe Occam's Razor ...
Pedro (Odessa, FL) - Sunday, 27 May, 2012, at 10:42:54 am

Tires can become noisy w/ wear, even before hitting the wear bars. Look for tread block scalloping.
Laz - Sunday, 27 May, 2012, at 2:19:13 pm

I had my rear howling wheel bearings done last Nov and now I can hear the sweet exhaust.... NM
Motobob - Sunday, 27 May, 2012, at 4:11:45 pm

Sure sounds like a wheel bearing. NM
MikelSr - Sunday, 27 May, 2012, at 6:34:56 pm

Try switching the rear wheels..I thought I had a wheel bearing problem..
Kimo - Monday, 28 May, 2012, at 6:43:23 pm

Good news, bad news!
Lawdevil & CURVN8R - Monday, 28 May, 2012, at 3:36:28 pm

Sounds like good news, good news...
Dave In MD - Monday, 28 May, 2012, at 3:44:42 pm

Re: Sounds like good news, good news...
carlos in Montreal - Monday, 28 May, 2012, at 6:29:27 pm

Removing wheels - there must be an easier way
Greg - Wednesday, 16 May, 2012, at 10:35:39 pm

Re: Removing wheels - there must be an easier way
986rgt - Wednesday, 16 May, 2012, at 10:42:35 pm

Re: Removing wheels - there must be an easier way
Greg - Wednesday, 16 May, 2012, at 10:53:30 pm

What Steve said. I watch the techs and they always remove a couple of wheel bolts...
MarcW - Wednesday, 16 May, 2012, at 10:47:15 pm

Re: What Steve said. I watch the techs and they always remove a couple of wheel bolts...
Petee_C - Monday, 28 May, 2012, at 12:21:53 am

Re: Removing wheels - there must be an easier way
John B in SC - Friday, 18 May, 2012, at 12:20:50 pm

Re: Removing wheels - there must be an easier way
Greg - Friday, 18 May, 2012, at 12:33:07 pm

Re: Removing wheels - there must be an easier way
San Rensho - Friday, 18 May, 2012, at 8:56:19 pm

Re: Removing wheels - there must be an easier way
Tom (Powell, OH) - Sunday, 20 May, 2012, at 9:03:50 am

put anti-seize on the hub - that keeps it from sticking. Then
grant - Monday, 21 May, 2012, at 9:50:46 pm

Whistling from gas cap area
steve_wilwerding - Monday, 21 May, 2012, at 10:06:48 am

I have the same issue
Kimo - Monday, 21 May, 2012, at 11:00:34 am

That's what the radio is for NM
Lawdevil & CURVN8R - Monday, 21 May, 2012, at 11:20:13 am

that reminds me...upgrade my radio NM
Kimo - Monday, 21 May, 2012, at 1:24:54 pm

a comment.....
por911(bc) - Monday, 21 May, 2012, at 1:18:58 pm

Yes - I plan on checking that one out too, thanks
Kimo - Monday, 21 May, 2012, at 1:26:31 pm

Re: Whistling from gas cap area
Thierry, Quebec City, Canada - Tuesday, 22 May, 2012, at 9:00:20 am

It wasn't my fuel cap...
Kimo - Saturday, 26 May, 2012, at 7:48:25 pm

The Porsche Wave
Laz - Thursday, 24 May, 2012, at 8:39:37 pm

Re: The Porsche Wave
KevinR-MedinaOhio - Friday, 25 May, 2012, at 12:55:20 pm

Not sure myself. NM
Laz - Saturday, 26 May, 2012, at 1:28:02 pm

Re: The Porsche Wave
KevinR-MedinaOhio - Friday, 25 May, 2012, at 5:33:42 pm

Oil Level Indicator Question
Mark from SC - Thursday, 24 May, 2012, at 6:56:48 am

Re: Oil Level Indicator Question
jwdbox - Thursday, 24 May, 2012, at 7:41:06 am

Actually, the porsche spec is to measure at operating temp.
grant - Thursday, 24 May, 2012, at 11:31:49 am

Re: Oil Level Indicator Question
Mark from SC - Thursday, 24 May, 2012, at 7:46:45 am

Re: Oil Level Indicator Question
jwdbox - Thursday, 24 May, 2012, at 8:15:44 am

Re: Oil Level Indicator Question
gedwin - Thursday, 24 May, 2012, at 11:09:02 am

They all should be checked warm. 99% of other makes and models too.
grant - Thursday, 24 May, 2012, at 11:43:03 am

Re: They all should be checked warm. 99% of other makes and models too.
gedwin - Friday, 25 May, 2012, at 2:12:38 pm

Interesting. 987s wont even give a [wrong] reading cold? My point was that its not just 987s
grant - Friday, 25 May, 2012, at 2:40:27 pm

My 06 987 will give a reading hot or cold
Guenter in Ontario - Friday, 25 May, 2012, at 5:20:37 pm

Re: My 06 987 will give a reading hot or cold
jwdbox - Friday, 25 May, 2012, at 5:42:44 pm

A flashing oil level indicator is a sign the level is low. I occasionally see this...
MarcW - Thursday, 24 May, 2012, at 2:31:06 pm

Thanks for all the information....
Mark from SC - Friday, 25 May, 2012, at 2:50:45 pm

if the oil is viscous (thick, cold) and has been recently run - an hour is typical. NM
grant - Friday, 25 May, 2012, at 8:19:10 pm

DIY guide to remove center console & install short shift kit - 987
Cris - Saturday, 19 May, 2012, at 4:44:35 pm

Re:Nire write up ,,tks NM
carlos in Montreal - Sunday, 20 May, 2012, at 3:03:13 pm

Thanks very much for preparing and posting this very useful guide. NM
Roger987 - Sunday, 20 May, 2012, at 10:28:56 pm

Roger, have you got yours installed yet?
Guenter in Ontario - Sunday, 20 May, 2012, at 11:37:27 pm

Re: Roger, have you got yours installed yet?
Roger987 - Monday, 21 May, 2012, at 10:42:28 am