Welcome! Log In Create A New Profile
Celebrating 10 years of PedrosBoard!
AnnouncementsLast Post
AnnouncementInstructions for posting photos (NEW & IMPROVED)10/22/2011 09:51AM
AnnouncementOur Rules11/11/2010 04:00PM
Tire Rack: Revolutionizing tire buying since 1979.
Buying through this link, gets PB a donation.

Expect the best, and accept no substitute.
PostViews

June and July POTM's are up in the POTM forum! *NM*
986rgt - Wednesday, 10 August, 2011, at 10:57:18 pm

1,596

Finally!!! grinning smiley *NM*
Gary in SoFL - Thursday, 11 August, 2011, at 5:39:37 pm

845

Porsche 929?
Laz - Saturday, 6 August, 2011, at 7:21:53 pm

1,941

Any photos of the new Porsche 929? *NM*
Naples986 - Sunday, 7 August, 2011, at 8:08:33 am

1,128

Well, I just did a Google image search. Here's the link:
Laz - Sunday, 7 August, 2011, at 12:27:30 pm

1,023

Car & Driver posted some proposed images which looked good. There were more, can't find them now.
Naples986 - Sunday, 7 August, 2011, at 2:43:33 pm

1,011

I thought a two-door shortened version of the Panamera was called a 911? hot smiley *NM*
db997S - Monday, 8 August, 2011, at 8:38:32 am

1,005

Only if you stuff the motor into the trunk. *NM*
Laz - Monday, 8 August, 2011, at 11:44:19 am

960

And then it ...
Pedro (Odessa, FL) - Monday, 8 August, 2011, at 12:31:25 pm

1,065

If Porsche is looking to expand the line up a Panamera Coupe would make a nice GT & cabrio. It
Naples986 - Monday, 8 August, 2011, at 1:42:17 pm

1,001

Re: If Porsche is looking to expand the line up a Panamera Coupe would make a nice GT & cabrio. It
Alberta Alex - Monday, 8 August, 2011, at 9:50:33 pm

1,109

I think I read about a conflict with Mazda over the 929 name? Some post
Naples986 - Monday, 8 August, 2011, at 10:29:48 pm

1,117

If it wasn't for conflict, the 911 would be a 901. Porsche has gotten away from using numbers *NM*
db997S - Tuesday, 9 August, 2011, at 8:46:49 am

972

And the reason in this case might've been "Conflict" with a capital C. *NM*
Laz - Tuesday, 9 August, 2011, at 9:13:21 am

935

Re: And the reason in this case might've been "Conflict" with a capital C.
Capt Ron - Wednesday, 10 August, 2011, at 1:20:18 pm

1,036

another c-word: Correct. *NM*
db997S - Wednesday, 10 August, 2011, at 2:02:07 pm

994

Yes, motivated by memories of Germany's unannounced "visit" in 1940. *NM*
Laz - Wednesday, 10 August, 2011, at 2:16:34 pm

966

I don't think it had anthing to do with any "unannounced visit"
Guenter in Ontario - Wednesday, 10 August, 2011, at 2:30:22 pm

974

I think he means the "unannounced visit" June 1940 by Hitler
Naples986 - Wednesday, 10 August, 2011, at 2:56:51 pm

945

I know that's what he meant, I just don't think there's any relation between the two events. *NM*
Guenter in Ontario - Wednesday, 10 August, 2011, at 3:26:07 pm

1,027

Looking for a fun way to get from Houston to Kerrville
PLStout (Pearland,TX) - Tuesday, 2 August, 2011, at 4:21:50 pm

1,535

My Rand McNally Road Atlas doesn't indicate many 'scenic' roads from Pearland to Kerrville...
MarcW - Wednesday, 3 August, 2011, at 7:56:09 pm

998

Re: Looking for a fun way to get from Houston to Kerrville -- Found!!
PLStout (Pearland,TX) - Tuesday, 9 August, 2011, at 1:41:44 pm

1,018

BTW Boxstoberfest buds...
PLStout (Pearland,TX) - Tuesday, 9 August, 2011, at 1:48:25 pm

1,036

Reads like you had a great drive. When I get time later today I'll trace your route out on a map...
MarcW - Tuesday, 9 August, 2011, at 1:59:02 pm

888

Re: Looking for a fun way to get from Houston to Kerrville -- Found!!
NorminHouston - Tuesday, 9 August, 2011, at 6:32:07 pm

972

Ok, I plotted the route... Looks pretty wobbly. How many beers did you say you had? J/K...
MarcW - Tuesday, 9 August, 2011, at 8:40:08 pm

953

Where to find replacement front bumper cover?
catalogguy - Sunday, 7 August, 2011, at 6:40:33 pm

1,676

Re: Where to find replacement front bumper cover?
Ruby - Sunday, 7 August, 2011, at 6:53:07 pm

1,012

The 996 ...
Pedro (Odessa, FL) - Sunday, 7 August, 2011, at 9:29:01 pm

936

Re: Where to find replacement front bumper cover?
DFW02S - Monday, 8 August, 2011, at 11:18:22 am

821

Re: Where to find replacement front bumper cover?
catalogguy - Monday, 8 August, 2011, at 1:38:30 pm

886

Re: Where to find replacement front bumper cover?
DFW02S - Monday, 8 August, 2011, at 1:43:24 pm

876

Re: Where to find replacement front bumper cover?
catalogguy - Monday, 8 August, 2011, at 1:48:29 pm

899

Re: Where to find replacement front bumper cover?
catalogguy - Tuesday, 9 August, 2011, at 5:19:37 pm

904

Got a lift! Jpeg Attachments
Petee_C - Wednesday, 3 August, 2011, at 10:26:36 am

2,117

Nice!....
Pedro (Odessa, FL) - Wednesday, 3 August, 2011, at 11:01:22 am

935

Re: Nice!....
Petee_C - Wednesday, 3 August, 2011, at 11:49:48 am

899

Here in Florida it's the same way...
Pedro (Odessa, FL) - Wednesday, 3 August, 2011, at 3:16:24 pm

937

Simple, cheap option
Mixster - Wednesday, 3 August, 2011, at 3:38:20 pm

980

Re: Simple, cheap option Jpeg Attachments
Petee_C - Monday, 8 August, 2011, at 11:19:50 pm

990

Wow, I'm jealous! *NM*
IFlyLow - Wednesday, 3 August, 2011, at 12:58:44 pm

1,116

Re: Wow, I'm jealous! +1 for me..
boxster99 - Wednesday, 3 August, 2011, at 2:34:12 pm

1,059

lucky you!
grant - Saturday, 6 August, 2011, at 3:02:03 pm

1,049

New McLaren Video
ddb986 - Monday, 8 August, 2011, at 1:48:09 pm

1,558

Re: New McLaren Video
db997S - Monday, 8 August, 2011, at 2:25:37 pm

845

Thanks for posting. I really enjoyed that thumbs up *NM*
Naples986 - Monday, 8 August, 2011, at 10:35:21 pm

888

Balance Shaft Failure
Kiki - Saturday, 6 August, 2011, at 11:53:27 am

3,871

Welcome to the board Kiki ...
Pedro (Odessa, FL) - Saturday, 6 August, 2011, at 2:53:55 pm

1,229

Re: Welcome to the board Kiki ...
mikefocke, '01S Sanford, NC - Saturday, 6 August, 2011, at 4:59:01 pm

1,009

Re: Welcome to the board Kiki ...
Kiki - Saturday, 6 August, 2011, at 10:13:36 pm

984

Re: Welcome to the board Kiki ...
Pedro (Odessa, FL) - Saturday, 6 August, 2011, at 11:49:00 pm

1,034

Re: Welcome to the board Kiki ...
mikefocke, '01S Sanford, NC - Sunday, 7 August, 2011, at 9:17:56 am

988

Re: Balance Shaft Failure
db997S - Monday, 8 August, 2011, at 8:35:43 am

1,123

Need some help with rear spoiler Jpeg Attachments
YanivY - Tuesday, 26 July, 2011, at 4:45:00 pm

1,677

You might see if you can source what you need from a place that specialized in parts...
MarcW - Tuesday, 26 July, 2011, at 4:55:50 pm

1,007

Re: You might see if you can source what you need from a place that specialized in parts...
YanivY - Tuesday, 26 July, 2011, at 5:25:45 pm

963

Being in Israel then you might be better off exploring Europe businesses for this spoiler...
MarcW - Tuesday, 26 July, 2011, at 5:46:09 pm

927

In the UK
mikefocke, '01S Sanford, NC - Wednesday, 27 July, 2011, at 9:52:25 am

944

Re: In the UK
YanivY - Wednesday, 27 July, 2011, at 2:23:07 pm

971

Also try dc Automotive
newt - Monday, 1 August, 2011, at 6:25:33 pm

945

Re: Also try dc Automotive
YanivY - Tuesday, 2 August, 2011, at 1:49:17 am

864

Re: Also try dc Automotive
YanivY - Tuesday, 2 August, 2011, at 1:55:12 am

782

Re: Also try dc Automotive
newt - Wednesday, 3 August, 2011, at 8:54:42 pm

1,097

Look above... someone just posted a site that sells spoilers. *NM*
Cris - Sunday, 7 August, 2011, at 10:43:54 pm

1,040

Re: Look below... someone just posted a site that sells spoilers. *NM*
Cris - Sunday, 7 August, 2011, at 10:45:41 pm

962

Re: Look below... someone just posted a site that sells spoilers.
YanivY - Monday, 8 August, 2011, at 2:28:44 am

887

Old Coolant Pressure Cap
Spyder 517 - Saturday, 6 August, 2011, at 12:17:33 pm

1,655

The coolant cap...
Pedro (Odessa, FL) - Saturday, 6 August, 2011, at 6:32:11 pm

945

Re: Old Coolant Pressure Cap
Dale_K - Sunday, 7 August, 2011, at 10:51:04 am

896

But I estimate that ...
Pedro (Odessa, FL) - Sunday, 7 August, 2011, at 6:32:04 pm

865

Tire Wear! eye popping smiley Hankook Ventus V12
Petee_C - Wednesday, 27 July, 2011, at 10:11:41 am

3,828

Re: Tire Wear! eye popping smiley Hankook Ventus V12
carlos in Montreal - Wednesday, 27 July, 2011, at 10:50:16 am

1,267

Re: Tire Wear! eye popping smiley Hankook Ventus V12
Petee_C - Wednesday, 27 July, 2011, at 2:14:59 pm

1,500

Re: Tire Wear! eye popping smiley Hankook Ventus V12
longislander1 - Friday, 29 July, 2011, at 11:58:52 am

1,309

Uneven tire wear is a sign of mis-alignment. For USA and Canada cars (any car driven in a...
MarcW - Wednesday, 27 July, 2011, at 4:16:08 pm

1,460

Re: Uneven tire wear is a sign of mis-alignment. For USA and Canada cars (any car driven in a...
db997S - Wednesday, 27 July, 2011, at 4:29:09 pm

1,986

With directional, but symmetrical tires,
Laz - Wednesday, 27 July, 2011, at 6:03:38 pm

1,430

Re: Tire Wear! eye popping smiley Hankook Ventus V12
Rob in CO - Wednesday, 27 July, 2011, at 11:47:20 pm

1,491

Re: Tire Wear! eye popping smiley Hankook Ventus V12
Petee_C - Thursday, 28 July, 2011, at 3:25:42 pm

1,221

So are most Boxster owners experiencing faster inside wear than outside? *NM*
RainyDayGarage - Thursday, 28 July, 2011, at 10:17:09 pm

1,568

My rears are pretty evenly worn at 26.5K miles *NM*
Guenter in Ontario - Friday, 29 July, 2011, at 9:36:43 am

1,445

When the inside of my rear tires start to wear...
Pedro (Odessa, FL) - Friday, 29 July, 2011, at 9:39:03 am

1,341

yea, my wear is pretty even across the tread and L to R
grant - Saturday, 6 August, 2011, at 8:31:30 pm

1,159

Re: My rears are pretty evenly worn at 26.5K miles
Petee_C - Friday, 29 July, 2011, at 9:43:10 am

1,563

Re: My rears are pretty evenly worn at 26.5K miles
Guenter in Ontario - Friday, 29 July, 2011, at 10:17:42 am

1,257

Re: My rears are pretty evenly worn at 26.5K miles
Petee_C - Friday, 29 July, 2011, at 11:22:38 am

1,189

No
mikefocke, '01S Sanford, NC - Friday, 29 July, 2011, at 9:46:14 am

1,356

Re: No
Petee_C - Friday, 29 July, 2011, at 10:15:41 am

1,365

You shall know the wear bars by their sound. *NM*
Laz - Friday, 29 July, 2011, at 11:59:05 am

1,282

There is an enormous difference in alignments
mikefocke, '01S Sanford, NC - Friday, 29 July, 2011, at 4:06:18 pm

1,586

Link's not working, mike. *NM*
Laz - Friday, 29 July, 2011, at 4:53:11 pm

1,205

The link in Mike's post has been fixed. Try it again. *NM*
Pedro (Odessa, FL) - Friday, 29 July, 2011, at 4:56:05 pm

1,342

Thanks. Very informative. *NM*
Laz - Saturday, 30 July, 2011, at 9:35:02 am

1,220

I simply do not trust indy shops for alignment, save for one... Jpeg Attachments
MarcW - Friday, 29 July, 2011, at 5:20:19 pm

1,131

It seems that you don't trust independents to do anything, Marc ... Jpeg Attachments
Pedro (Odessa, FL) - Saturday, 30 July, 2011, at 10:51:41 am

1,308

Not entirely true. Saturday walked up the Boxster and spotted a low left rear tire....
MarcW - Sunday, 31 July, 2011, at 3:18:07 pm

1,331

I don't think it was a good find
mikefocke, '01S Sanford, NC - Monday, 1 August, 2011, at 9:17:42 am

1,151

That's almost standard for indy tire shops nowadays, the tire sale attempt. The tire shop....
MarcW - Monday, 1 August, 2011, at 2:15:53 pm

1,227

Re: That's almost standard for indy tire shops nowadays, the tire sale attempt. The tire shop....
old timer - Monday, 1 August, 2011, at 4:01:17 pm

1,233

Tire came off. The tech just marked the tire. *NM*
MarcW - Tuesday, 2 August, 2011, at 2:27:02 pm

1,395

Re: Tire Wear! eye popping smiley Hankook Ventus V12 Jpeg Attachments
Petee_C - Saturday, 30 July, 2011, at 10:20:50 pm

1,394

filter metal
Nashhorn - Monday, 25 July, 2011, at 10:42:22 pm

2,071

Re: filter metal
Pedro (Odessa, FL) - Tuesday, 26 July, 2011, at 7:36:48 am

1,182

Re: filter metal
Dave In MD - Tuesday, 26 July, 2011, at 8:03:57 pm

1,078

Re: filter metal
db997S - Tuesday, 26 July, 2011, at 8:31:34 am

1,769

Be careful you don't over react. Is the metal ferrous or non-ferrous? If the engine's running ok...
MarcW - Tuesday, 26 July, 2011, at 1:06:53 pm

1,119

Re: Be careful you don't over react. Is the metal ferrous or non-ferrous? If the engine's running ok...
Nashhorn - Tuesday, 26 July, 2011, at 11:26:02 pm

1,300

The noise you heard after the car sat so long is normal. These engines can shed metal....
MarcW - Wednesday, 27 July, 2011, at 4:28:51 pm

1,102

Re: The noise you heard after the car sat so long is normal. These engines can shed metal....
Nashhorn - Saturday, 30 July, 2011, at 9:58:53 pm

1,237

One thought.
grant - Saturday, 6 August, 2011, at 3:09:52 pm

1,081

My 2000 S - What oil weight when new? and now recommended? Why the change?
Bruce In Philly (2000 S Boxster, now '09 C2S) - Monday, 1 August, 2011, at 6:41:01 pm

1,689

I highly recommend ...
Pedro (Odessa, FL) - Monday, 1 August, 2011, at 10:52:35 pm

929

First, dont fret it TOO much. Next, i agree that 10w40 is a good balance for cars where
grant - Saturday, 6 August, 2011, at 3:06:35 pm

897

Calling Marc W! Calling Marc W! "Weigh" in on this issue, please. *NM*
Laz - Tuesday, 2 August, 2011, at 11:52:14 am

890

Re: Calling Marc W! Calling Marc W! "Weigh" in on this issue, please.
IFlyLow - Tuesday, 2 August, 2011, at 12:26:49 pm

893

I tried them bolts...
Bruce In Philly (2000 S Boxster, now '09 C2S) - Tuesday, 2 August, 2011, at 12:36:37 pm

907

Re: I tried them bolts...
Guenter in Ontario - Tuesday, 2 August, 2011, at 1:45:53 pm

869

Re: I tried them bolts...
IFlyLow - Tuesday, 2 August, 2011, at 2:43:54 pm

843

When the sparks fly I'd rather have tungsten, not titanium bolts. *NM*
Laz - Tuesday, 2 August, 2011, at 12:43:07 pm

924

IWireP for IPhone 4
SPG356 - Saturday, 6 August, 2011, at 11:43:59 am

1,505

Front end vibration - advice needed
Bruce In Philly (2000 S Boxster, now '09 C2S) - Thursday, 4 August, 2011, at 5:49:53 pm

2,308

The ball joints...
Pedro (Odessa, FL) - Thursday, 4 August, 2011, at 6:14:54 pm

1,433

You can put a screwdriver in there even on new control arms *NM*
Boxsterra - Thursday, 4 August, 2011, at 10:24:47 pm

1,189

Could be some worn part or parts, but I'd double check the front and rear tire inflation pressures..
MarcW - Friday, 5 August, 2011, at 2:42:09 pm

1,529

Re: Could be some worn part or parts, but I'd double check the front and rear tire inflation pressures..
db997S - Friday, 5 August, 2011, at 5:29:10 pm

1,191

Wow Marc, you may be onto something here.....
Bruce In Philly (2000 S Boxster, now '09 C2S) - Friday, 5 August, 2011, at 5:56:20 pm

1,044

Generally adding pressure in the front...
Pedro (Odessa, FL) - Friday, 5 August, 2011, at 8:32:18 pm

1,296

Emissions Test Readiness??? New Engine Saga continues...
Byron in Atlanta - Wednesday, 3 August, 2011, at 1:28:54 pm

19,427

There are separate flags for different "readiness" components
Boxsterra - Wednesday, 3 August, 2011, at 1:47:05 pm

1,854

Re: There are separate flags for different "readiness" components
Byron in Atlanta - Wednesday, 3 August, 2011, at 2:18:28 pm

1,618

Be sure you do not 'clear' the codes as this resets all the readiness monitors to not ready...
MarcW - Wednesday, 3 August, 2011, at 4:56:14 pm

1,797

Re: There are separate flags for different "readiness" components
Byron in Atlanta - Wednesday, 3 August, 2011, at 6:28:48 pm

1,690

Those two can take a while to complete. The car must be driven enough and in a fashion...
MarcW - Wednesday, 3 August, 2011, at 7:37:48 pm

1,677

You basically need to complete two drive cycles
Boxsterra - Thursday, 4 August, 2011, at 8:55:36 am

2,222

Re: Emissions Test Readiness??? New Engine Saga continues...
boxster99 - Wednesday, 3 August, 2011, at 2:29:33 pm

1,734

I was going to tell you to ...
Pedro (Odessa, FL) - Wednesday, 3 August, 2011, at 3:20:02 pm

1,534

I have had this problem before Byron - actually the last 2 years.....
jg wnc - Thursday, 4 August, 2011, at 9:47:51 am

1,598

Note that "drive cycles" has a pretty strict definition
Boxsterra - Thursday, 4 August, 2011, at 10:26:11 pm

1,715

Re: Note that "drive cycles" has a pretty strict definition
jg wnc - Friday, 5 August, 2011, at 8:23:42 am

1,525

See the link I gave above
Boxsterra - Friday, 5 August, 2011, at 9:21:58 am

1,314

Re: See the link I gave above
racyclist - Friday, 5 August, 2011, at 10:27:07 am

1,552

Maybe I'm just lucky but I do not make any special attempt to follow any of the drive...
MarcW - Friday, 5 August, 2011, at 2:37:09 pm

1,474

Mobil 1 0W-40 oil and filter sale at O'reilly Auto Parts.
r9i8c7k - Friday, 5 August, 2011, at 1:43:13 pm

1,875

CV joints
dghii - Monday, 1 August, 2011, at 11:06:12 pm

2,041

And speaking of CV joints...
dghii - Monday, 1 August, 2011, at 11:16:28 pm

1,186

Why do you think you need to replace the half-shafts? When the CV boots on my 02 Boxster...
MarcW - Tuesday, 2 August, 2011, at 2:16:46 pm

1,608

Re: And speaking of CV joints...
joeve - Wednesday, 3 August, 2011, at 8:15:38 pm

1,335

Re: And speaking of CV joints...
dghii - Wednesday, 3 August, 2011, at 11:21:30 pm

1,116

Re: And speaking of CV joints...agree with Mark...
Ed(Arizona) - Friday, 5 August, 2011, at 12:12:59 pm

1,236

The ratcheting mechanism is on the hand lever in the cabin
Boxsterra - Tuesday, 2 August, 2011, at 9:11:49 am

1,319

I understand.
dghii - Tuesday, 2 August, 2011, at 11:40:45 am

1,311

This brings to mind discussions about a car's imperviousness to salt corrosion, etc.
Laz - Tuesday, 2 August, 2011, at 11:50:27 am

1,090

Re: This brings to mind discussions about a car's imperviousness to salt corrosion, etc.
dghii - Tuesday, 2 August, 2011, at 2:43:31 pm

1,236

I have some data points on corrosion
Bruce In Philly (2000 S Boxster, now '09 C2S) - Tuesday, 2 August, 2011, at 5:30:33 pm

1,176

It's good to see your observations. I still wouldn't "unnecessarily" take a car out on salty roads.
Laz - Tuesday, 2 August, 2011, at 7:39:48 pm

1,227

My Boxster Spyder Jpeg Attachments
Byron in Atlanta - Thursday, 28 July, 2011, at 10:55:44 pm

2,644

Looks great- where did you get your spoiler? I have been looking for one similar to that. *NM*
IFlyLow - Friday, 29 July, 2011, at 12:38:14 am

1,037

Elite Spoilers.com. They painted to match. Very Nice!smileys with beer *NM*
Byron in Atlanta - Friday, 29 July, 2011, at 9:28:45 am

1,302

Looks great Byron. Congrats. *NM*
Clam - Tuesday, 2 August, 2011, at 12:30:43 pm

1,096

It looks great!
MikenOH - Wednesday, 3 August, 2011, at 10:58:04 am

1,217

Thanks guys!!! It's for sale!!! Jpeg Attachments
Byron in Atlanta - Wednesday, 3 August, 2011, at 1:01:40 pm

1,798

Is that Christian's Turbo? *NM*
Pedro (Odessa, FL) - Wednesday, 3 August, 2011, at 3:22:20 pm

1,100

I thought Christian's was a C4S? But not his. *NM*
Byron in Atlanta - Wednesday, 3 August, 2011, at 4:49:55 pm

1,087

You are correct. *NM*
Pedro (Odessa, FL) - Wednesday, 3 August, 2011, at 4:58:58 pm

989

Sweet ride Byron!!!
Christian in Atl - Friday, 5 August, 2011, at 10:06:30 am

1,109

Heat affects my fuel guage and oil guage
IFlyLow - Tuesday, 2 August, 2011, at 12:20:57 pm

1,491

New one on me. I've had my Garmin NAV unit refuse to work due to the heat ....
MarcW - Tuesday, 2 August, 2011, at 2:19:05 pm

821

Re: Heat affects my fuel guage and oil guage
jwdbox - Wednesday, 3 August, 2011, at 9:16:24 am

831

My guess would be ...
Pedro (Odessa, FL) - Wednesday, 3 August, 2011, at 9:56:29 am

860

Re: My guess would be ...
IFlyLow - Wednesday, 3 August, 2011, at 1:00:06 pm

832

NBC: My 1st trip to Harbor Freight
Petee_C - Tuesday, 26 July, 2011, at 2:25:05 pm

1,670

Re: NBC: My 1st trip to Harbor Freight
joeve - Tuesday, 26 July, 2011, at 4:05:20 pm

1,092

Re: NBC: My 1st trip to Harbor Freight
Petee_C - Wednesday, 27 July, 2011, at 8:41:12 am

886

A proper inspection of a HF store...
Pedro (Odessa, FL) - Wednesday, 27 July, 2011, at 9:33:39 am

950

Agree. HF is genius with their pricing.
Boxsterra - Wednesday, 27 July, 2011, at 4:46:40 pm

934

Sometimes they have a great discount...
Pedro (Odessa, FL) - Tuesday, 26 July, 2011, at 4:15:57 pm

944

+1 on HF
Dave In MD - Tuesday, 26 July, 2011, at 7:20:11 pm

957

Re: +1 on HF
Petee_C - Wednesday, 3 August, 2011, at 9:16:02 am

958

A few pictures from the PCA club races on Sunday. Jpeg Attachments
Guenter in Ontario - Tuesday, 2 August, 2011, at 7:54:54 pm

1,578

Looks like it was a great day Guenter, nice shots *NM*
DougW - Wednesday, 3 August, 2011, at 7:47:11 am

832

Tire Gauge
p-wagen - Monday, 1 August, 2011, at 5:17:13 pm

1,855

Re: Tire Gauge *NM*
p-wagen - Monday, 1 August, 2011, at 5:18:34 pm

911

Re: Tire Gauge
p-wagen - Monday, 1 August, 2011, at 5:27:36 pm

909

Re: Tire Gauge
986rgt - Monday, 1 August, 2011, at 6:35:31 pm

926

I have this digital one from Longacre Racing...
patrick - Monday, 1 August, 2011, at 8:15:11 pm

939

Longacre Racing...
Harvey in FL - Tuesday, 2 August, 2011, at 9:00:39 am

970

What are the advantages of liquid filled gauges?
Laz - Tuesday, 2 August, 2011, at 11:47:54 am

1,669

Re: Tire Gauge
Capt Ron - Monday, 1 August, 2011, at 11:16:33 pm

999

Re: Tire Gauge
p-wagen - Tuesday, 2 August, 2011, at 8:19:59 pm

837

Boxster pizza and beer transport Jpeg Attachments
Guenter in Ontario - Tuesday, 2 August, 2011, at 1:24:44 pm

1,761

Good stuff... question
Bruce In Philly (2000 S Boxster, now '09 C2S) - Tuesday, 2 August, 2011, at 1:45:29 pm

910

Re: Good stuff... question Jpeg Attachments
Guenter in Ontario - Tuesday, 2 August, 2011, at 2:04:25 pm

843

Looks like you have a silver car, wonder what a black car's front trunk would have registered? *NM*
db997S - Tuesday, 2 August, 2011, at 3:26:34 pm

849

Another good point since
Guenter in Ontario - Tuesday, 2 August, 2011, at 4:08:57 pm

832

Yes, color is only one of the factors
Bruce In Philly (2000 S Boxster, now '09 C2S) - Tuesday, 2 August, 2011, at 5:23:39 pm

868

Re: Yes, color is only one of the factors
Guenter in Ontario - Tuesday, 2 August, 2011, at 6:31:49 pm

855

Transmission overhaul (continued)
Dwass - Thursday, 28 July, 2011, at 4:58:46 pm

2,452

Answers...
Pedro (Odessa, FL) - Thursday, 28 July, 2011, at 6:17:22 pm

1,330

Re: Answers...
Dwass - Friday, 29 July, 2011, at 5:12:51 pm

1,498

On the same topic, but regarding fluids
Dwass - Monday, 1 August, 2011, at 8:46:40 pm

1,468

This is my other choice for gear oil ... Jpeg Attachments
Pedro (Odessa, FL) - Monday, 1 August, 2011, at 10:41:10 pm

1,283

Re: This is my other choice for gear oil ...
Dwass - Tuesday, 2 August, 2011, at 5:14:20 pm

1,075

Re: On the same topic, but regarding fluids
dghii - Monday, 1 August, 2011, at 10:45:41 pm

1,357

Re: On the same topic, but regarding fluids
Dwass - Tuesday, 2 August, 2011, at 5:15:25 pm

1,378

1999 Codes
keithl - Wednesday, 13 July, 2011, at 8:54:36 am

2,245

Error codes are because the DME reached its lean limit for both banks. This indicates...
MarcW - Wednesday, 13 July, 2011, at 1:34:23 pm

1,545

Re: Error codes are because the DME reached its lean limit for both banks. This indicates...
keithl - Wednesday, 13 July, 2011, at 2:46:38 pm

2,991

No. That is I don't see how. The fuel ....
MarcW - Wednesday, 13 July, 2011, at 3:32:46 pm

1,298

Hmmm..... couldn't the o2 sensor be the cause of an over-rich mixture?
Bruce In Philly (2000 S Boxster, now '09 C2S) - Wednesday, 13 July, 2011, at 10:33:28 pm

1,928

Re: Hmmm..... couldn't the o2 sensor be the cause of an over-rich mixture?
keithl - Thursday, 14 July, 2011, at 12:05:12 pm

1,174

An AOS does not fail, at least I've not experienced or read about one failing this way...
MarcW - Thursday, 14 July, 2011, at 2:01:16 pm

1,354

Re: An AOS does not fail, at least I've not experienced or read about one failing this way...
keithl - Thursday, 14 July, 2011, at 2:45:36 pm

1,350

Re: 1999 Codes
Alcantera - Thursday, 14 July, 2011, at 9:08:05 pm

1,193

Re: 1999 Codes
keithl - Friday, 15 July, 2011, at 2:55:53 pm

1,095

Re: 1999 Codes
keithl - Friday, 22 July, 2011, at 10:36:12 pm

1,219

The absence of the check engine light and codes is almost certainly a temporary thing....
MarcW - Monday, 25 July, 2011, at 5:21:52 pm

1,273

Re: 1999 Codes
philip_damon - Monday, 1 August, 2011, at 5:08:56 pm

1,039

That bank is running rich and the DME is at its lean limit. Fuel pressure is suspect...but...
MarcW - Tuesday, 2 August, 2011, at 2:23:55 pm

2,526

Boxster v Deer and 2000 Valuation
AndyInNYC - Tuesday, 19 July, 2011, at 11:55:28 am

2,384

Count yourself lucky
mikefocke, '01S Sanford, NC - Tuesday, 19 July, 2011, at 12:17:34 pm

1,539

Re: Count yourself lucky
AndyInNYC - Tuesday, 19 July, 2011, at 12:30:47 pm

1,486

Have your air bag system checked
patrick - Friday, 22 July, 2011, at 8:39:03 pm

1,818

Re: Have your air bag system checked
whall - Saturday, 23 July, 2011, at 9:24:55 am

1,476

Re: Have your air bag system checked
Paul S. - Saturday, 23 July, 2011, at 1:10:21 pm

1,615

When I totaled a Boxster in a front end crash, no airbags deployed.
mikefocke, '01S Sanford, NC - Saturday, 23 July, 2011, at 4:43:22 pm

3,892

Re: Have your air bag system checked
patrick - Monday, 25 July, 2011, at 11:53:05 am

1,272

Re: Have your air bag system checked
AndyInNYC - Monday, 1 August, 2011, at 10:43:30 am

1,248

Everything. Check everything. In fact I'd remove the front bumper cover and verify....
MarcW - Monday, 1 August, 2011, at 2:08:09 pm

1,561

Some things to check before you leave the repair shop...
patrick - Monday, 1 August, 2011, at 8:38:51 pm

1,281

Are you sure $8K is not 80% of the value? *NM*
Boxsterra - Thursday, 21 July, 2011, at 8:14:07 pm

1,390

The estimate of your car's value will always come in low using the insurance company's...
MarcW - Monday, 25 July, 2011, at 5:19:31 pm

1,737

Scenic Arkansas drive after the trip. Jpeg Attachments
goldened - Sunday, 31 July, 2011, at 8:55:41 pm

1,723

Re: Scenic Arkansas drive after the trip.
Dale_K - Monday, 1 August, 2011, at 3:59:11 pm

992

What usually goes out? Window regulator or motor......or both?
Sheriff John - Friday, 29 July, 2011, at 12:01:17 am

1,732

Re: What usually goes out? Window regulator or motor......or both?
Mixster - Friday, 29 July, 2011, at 9:36:20 am

1,075

I agree ...
Pedro (Odessa, FL) - Friday, 29 July, 2011, at 9:41:19 am

927

Over 6 years, all four plastic window regulators on my Lincoln LS failed, motors were fine. *NM*
Gary in SoFL - Friday, 29 July, 2011, at 10:27:51 am

940

Let me clarify the above statement of ...
Pedro (Odessa, FL) - Friday, 29 July, 2011, at 12:42:40 pm

940

Well, Happy Motoring anyway, even if it's joy in operational windows. *NM*
Laz - Friday, 29 July, 2011, at 1:20:07 pm

889

Re: Let me clarify the above statement of ...
old timer - Friday, 29 July, 2011, at 2:26:40 pm

977

No, I go fishing in a ... Jpeg Attachments
Pedro (Odessa, FL) - Friday, 29 July, 2011, at 3:00:40 pm

918

Re: No, I go fishing in a ...
old timer - Saturday, 30 July, 2011, at 7:29:44 pm

969

Re: What usually goes out? Window regulator or motor......or both?
Kermit In Cleveland - Monday, 1 August, 2011, at 1:39:43 pm

902

Porsche profits in the news
MikenOH - Monday, 1 August, 2011, at 8:36:39 am

1,578

Re: Porsche profits in the news
db997S - Monday, 1 August, 2011, at 11:15:29 am

792

The profits kick in
mikefocke, '01S Sanford, NC - Monday, 1 August, 2011, at 12:01:27 pm

842

Anyone going to the Porsche Parade in Savannah?
Lawdevil & CURVN8R - Friday, 24 June, 2011, at 8:17:07 pm

2,034

Re: Anyone going to the Porsche Parade in Savannah?
dak911 - Saturday, 25 June, 2011, at 8:03:18 am

1,226

Daniel... Jpeg Attachments
Pedro (Odessa, FL) - Saturday, 25 June, 2011, at 9:08:57 am

1,305

Re: Passing this year
bgale (Montrose,CO) - Saturday, 25 June, 2011, at 11:40:21 am

1,411

Re: Anyone going to the Porsche Parade in Savannah?
Ed B - Sunday, 26 June, 2011, at 8:37:59 am

1,099

Re: Anyone going to the Porsche Parade in Savannah?
steve on hhi - Saturday, 30 July, 2011, at 11:03:50 am

992

I wish I could go ...
Pedro (Odessa, FL) - Saturday, 30 July, 2011, at 12:26:08 pm

1,059

Re: Anyone going to the Porsche Parade in Savannah? Jpeg Attachments
Gary in SoFL - Saturday, 30 July, 2011, at 2:06:45 pm

1,098

Re: Anyone going to the Porsche Parade in Savannah?
steve on hhi - Saturday, 30 July, 2011, at 4:29:43 pm

1,030

Kepp an eye out for the ORANGE t-shirts... Jpeg Attachments
Pedro (Odessa, FL) - Saturday, 30 July, 2011, at 12:30:10 pm

1,103

Re: Kepp an eye out for the ORANGE t-shirts...
Ed B - Saturday, 30 July, 2011, at 8:32:13 pm

1,043

Re: Kepp an eye out for the ORANGE t-shirts...
steve on hhi - Sunday, 31 July, 2011, at 9:35:47 am

1,006

How's this for cool?
Laz - Sunday, 31 July, 2011, at 9:53:36 am

1,037

Re: How's this for cool?
steve on hhi - Sunday, 31 July, 2011, at 10:25:06 am

1,022

This one, maybe? ... Jpeg Attachments
Pedro (Odessa, FL) - Sunday, 31 July, 2011, at 11:36:42 am

1,108