Main Forum

Discussion of Boxsters and other Porsches

Announcements		Last Post
	Instructions for posting photos (NEW & IMPROVED)	10/22/2011 09:51AM
	Our Rules	11/11/2010 04:00PM

Buying through this link, gets PB a donation.	Products for your Boxster, Cayman and Carrera.

Page 184 of 215 Pages:

179 180 181 182 183184185 186 187 188

Forum List New Topic RSS

Post	Views
Advice on upgrading leather? IFlyLow - Sunday, 17 July, 2011, at 9:15:53 am	1,739
Have you considered leatherique? TheFarmer - Sunday, 17 July, 2011, at 11:16:37 am	1,091
Re: Have you considered leatherique? IFlyLow - Monday, 18 July, 2011, at 12:59:36 am	1,215
Have you thrown scrambled eggs at it? *NM* TheFarmer - Monday, 18 July, 2011, at 7:07:42 am	1,066
Re: Advice on upgrading leather? Alcantera - Monday, 18 July, 2011, at 7:42:57 am	1,093
Re: Advice on upgrading leather? IFlyLow - Tuesday, 19 July, 2011, at 12:29:33 am	868
I've been able to bring back... Pedro (Odessa, FL) - Monday, 18 July, 2011, at 10:31:43 am	982
Once again, Pedro, you are THE MAN IFlyLow - Wednesday, 20 July, 2011, at 3:52:13 pm	928
A PB Orange hat is being flown out to you *NM* Pedro (Odessa, FL) - Wednesday, 20 July, 2011, at 4:39:04 pm	968
Extreme difficulty refitting trunk trim Dale_K - Tuesday, 19 July, 2011, at 9:21:35 am	1,585
Go run the can opener. *NM* MarcW - Tuesday, 19 July, 2011, at 3:06:24 pm	847
Very cute!!! *NM* r9i8c7k - Wednesday, 20 July, 2011, at 12:43:09 pm	896
You'd better stop by before it's gone. (NPC) Laz - Tuesday, 19 July, 2011, at 5:20:52 pm	1,443
Bicycle Rack for 2001 Boxster? stowie27 - Monday, 18 July, 2011, at 2:55:17 pm	6,055
Willwood - I have one on my 2000 S and love it. Bruce In Philly (2000 S Boxster, now '09 C2S) - Monday, 18 July, 2011, at 4:02:45 pm	1,771
Re: Willwood - I have one on my 2000 S and love it. stowie27 - Tuesday, 19 July, 2011, at 8:57:15 am	1,089
Here's a more affordable version... Pedro (Odessa, FL) - Tuesday, 19 July, 2011, at 9:13:46 am	1,177
Re: Bicycle Rack for 2001 Boxster? Ruby - Monday, 18 July, 2011, at 5:20:16 pm	1,406
That was about 8-9 years ago... here are the prices then Bruce In Philly (2000 S Boxster, now '09 C2S) - Monday, 18 July, 2011, at 5:33:18 pm	998
Re: Bicycle Rack for 2001 Boxster? AndyInNYC - Tuesday, 19 July, 2011, at 12:17:10 pm	1,074
Good clarification Bruce In Philly (2000 S Boxster, now '09 C2S) - Tuesday, 19 July, 2011, at 12:32:58 pm	1,044
Too much glare from that shine to even see the bumperettes AndyInNYC - Tuesday, 19 July, 2011, at 3:35:56 pm	1,059
Is the radio the only thing to run off that fuse? Trying to determine if the radio in my '09 997 db997S - Tuesday, 19 July, 2011, at 1:15:10 pm	1,367
Earlier models have a problem with the radio getting in a goofy state. The techs tell me a work.... MarcW - Tuesday, 19 July, 2011, at 2:15:24 pm	760
Trip down Hwy 1 to San Louis Obispo BoxsterBob - San Carlos - Tuesday, 19 July, 2011, at 1:15:11 am	1,704
Congrats on your anniversary! *NM* IFlyLow - Tuesday, 19 July, 2011, at 1:36:04 am	912
Re: Congrats on your anniversary! +1 Guenter in Ontario - Tuesday, 19 July, 2011, at 9:31:37 am	870
Re: Congrats on your anniversary! +1 BoxsterBob - San Carlos - Tuesday, 19 July, 2011, at 11:15:21 am	812
Nice ... Pedro (Odessa, FL) - Tuesday, 19 July, 2011, at 10:06:21 am	872
Re: Nice ... MikenOH - Tuesday, 19 July, 2011, at 10:24:29 am	920
Am I crazy to try and do my own clutch? Dwass - Wednesday, 13 July, 2011, at 3:14:07 am	3,006
As long as the car can sit for a while and you're patient it's doable Boxsterra - Wednesday, 13 July, 2011, at 6:54:38 am	2,046
Re: As long as the car can sit for a while and you're patient it's doable IFlyLow - Wednesday, 13 July, 2011, at 12:42:48 pm	2,491
Re: As long as the car can sit for a while and you're patient it's doable Dwass - Wednesday, 13 July, 2011, at 2:24:39 pm	1,597
It might be a big help to have to engine support bar the dealers use to hold the engine in place. *NM* Laz - Wednesday, 13 July, 2011, at 11:02:58 am	3,173
Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place. IFlyLow - Wednesday, 13 July, 2011, at 12:44:23 pm	1,653
Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place. Dwass - Wednesday, 13 July, 2011, at 2:27:04 pm	2,265
Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place. Petee_C - Wednesday, 13 July, 2011, at 4:45:51 pm	1,588
If you have a big area... Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 5:18:14 pm	1,787
Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place. Dwass - Wednesday, 13 July, 2011, at 2:27:47 pm	1,505
This works as good or better... Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 3:48:31 pm	1,998
The new Techno-Bar product *NM* Gary in SoFL - Wednesday, 13 July, 2011, at 3:51:09 pm	1,803
Re: This works as good or better... Dwass - Wednesday, 13 July, 2011, at 3:54:50 pm	1,857
Those are... Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 4:02:00 pm	1,766
But they are not "Pedro Orange" ---- Would a jack (like listed below) work?? tomstrickland - Wednesday, 13 July, 2011, at 5:13:02 pm	1,774
Either one of those... Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 5:23:44 pm	2,001
Just did mine last month. IFlyLow - Wednesday, 13 July, 2011, at 12:40:47 pm	1,715
Re: Just did mine last month. Dwass - Wednesday, 13 July, 2011, at 2:09:38 pm	1,479
Re: Just did mine last month. Dwass - Wednesday, 13 July, 2011, at 2:29:20 pm	1,620
Re: Just did mine last month. IFlyLow - Thursday, 14 July, 2011, at 1:55:18 pm	1,705
That's a great deal Boxsterra - Thursday, 14 July, 2011, at 7:52:10 pm	1,630
Not necessarily... dghii - Friday, 15 July, 2011, at 3:05:05 pm	1,743
a comment...... por911(bc) - Wednesday, 13 July, 2011, at 4:14:05 pm	1,729
Re: a comment...... Dwass - Wednesday, 13 July, 2011, at 5:35:54 pm	2,804
Re: a comment...... por911(bc) - Wednesday, 13 July, 2011, at 6:06:11 pm	1,625
How tall is the transmission? Dwass - Wednesday, 13 July, 2011, at 5:33:21 pm	1,824
You'll need very tall stands *NM* Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 5:53:34 pm	1,777
Go to this Pelican Parts page to get an idea Laz - Wednesday, 13 July, 2011, at 7:39:15 pm	2,003
Re: Am I crazy to try and do my own clutch? Ed(Arizona) - Wednesday, 13 July, 2011, at 8:07:56 pm	2,034
Engine-transmission alignment isn't just tricky. If the input shaft gets bent... Laz - Thursday, 14 July, 2011, at 10:35:02 pm	4,043
You would have to try pretty hard to bend the input shaft Boxsterra - Friday, 15 July, 2011, at 9:13:41 am	2,322
Re: You would have to try pretty hard to bend the input shaft Laz - Friday, 15 July, 2011, at 10:10:47 am	1,676
Re: Am I crazy to try and do my own clutch? Dwass - Sunday, 17 July, 2011, at 6:59:40 pm	1,674
So here's where I'm at... Dwass - Sunday, 17 July, 2011, at 6:37:57 pm	1,794
Don't run the risk... Pedro (Odessa, FL) - Monday, 18 July, 2011, at 10:11:25 am	1,667
Re: Don't run the risk... Dwass - Monday, 18 July, 2011, at 5:50:18 pm	1,755
If the clutch is slipping... MarcW - Monday, 18 July, 2011, at 6:08:08 pm	1,700
Re: If the clutch is slipping... Dwass - Monday, 18 July, 2011, at 7:00:02 pm	1,674
The RMS seal installation video looks ok. It appears to be crude but I've installed other seals... MarcW - Monday, 18 July, 2011, at 10:41:45 pm	1,977
RMS is trickier than you might think. IFlyLow - Tuesday, 19 July, 2011, at 12:25:28 am	1,684
Re: RMS is trickier than you might think. Dwass - Tuesday, 19 July, 2011, at 3:50:44 am	1,633
Help ! With my stalling 2000 boxster please.......... Blackboxst - Tuesday, 3 May, 2011, at 3:03:07 pm	3,013
Running the car with the MAF disconnected ... Pedro (Odessa, FL) - Tuesday, 3 May, 2011, at 3:26:47 pm	10,413
Re: Help ! With my stalling 2000 boxster please.......... Dale_K - Wednesday, 4 May, 2011, at 4:19:29 pm	1,924
Re: Help ! With my stalling 2000 boxster please.......... Blackboxst - Wednesday, 4 May, 2011, at 7:47:53 pm	3,369
Re: Help ! With my stalling 2000 boxster please.......... LocoDriver - Wednesday, 4 May, 2011, at 7:00:56 pm	2,903
Re: Help ! With my stalling 2000 boxster please.......... Blackboxst - Wednesday, 4 May, 2011, at 7:41:04 pm	2,360
My first thought is diagnose, don't replace grant - Wednesday, 4 May, 2011, at 7:56:18 pm	1,635
Re: My first thought is diagnose, don't replace Blackboxst - Wednesday, 4 May, 2011, at 8:12:03 pm	1,627
Not oiling a filter than requires oiling can put the MAF at risk (and the engine....).... MarcW - Wednesday, 4 May, 2011, at 8:49:33 pm	1,543
Re: Not oiling a filter than requires oiling can put the MAF at risk (and the engine....).... Blackboxst - Thursday, 5 May, 2011, at 8:24:10 am	1,627
Sorry cause I must have misread what you posted. If the engine runs bad with the new MAF... MarcW - Thursday, 5 May, 2011, at 1:38:29 pm	3,069
Re: Help ! With my stalling 2000 boxster please.......... Thierry, Quebec City, Canada - Thursday, 5 May, 2011, at 3:09:01 pm	1,821
That's a very good point Thierry... Pedro (Odessa, FL) - Thursday, 5 May, 2011, at 4:47:07 pm	1,621
Re: That's a very good point Thierry... Blackboxst - Friday, 6 May, 2011, at 9:57:47 am	1,797
Porsche definitely requires a remap when going from the .124 to .125 MAF Boxsterra - Friday, 6 May, 2011, at 11:28:14 am	1,942
Re: Porsche definitely requires a remap when going from the .124 to .125 MAF Blackboxst - Saturday, 7 May, 2011, at 1:34:52 pm	1,797
An odd question mikefocke, '01S Sanford, NC - Saturday, 7 May, 2011, at 8:42:14 pm	1,559
Re: An odd question Blackboxst - Sunday, 8 May, 2011, at 12:07:50 pm	1,722
If the car was running ok when you put it away and then after sitting awhile it now runs poorly... MarcW - Tuesday, 10 May, 2011, at 9:08:39 am	1,711
Your problem may not the the MAF... Pedro (Odessa, FL) - Sunday, 8 May, 2011, at 12:33:42 pm	2,445
Re: Your problem may not the the MAF... Blackboxst - Monday, 9 May, 2011, at 9:58:18 am	1,770
When you disconnect the MAF... Pedro (Odessa, FL) - Monday, 9 May, 2011, at 10:45:47 am	1,727
I'm not convinced it's your MAF - OBDII is your friend. Red_Lightnin! - Monday, 9 May, 2011, at 5:21:13 pm	3,675
Re: I'm not convinced it's your MAF - OBDII is your friend. Blackboxst - Thursday, 12 May, 2011, at 11:27:26 am	1,820
You are correct Boxsterra - Friday, 13 May, 2011, at 7:39:06 am	1,537
a comment.......... por911(bc) - Monday, 9 May, 2011, at 8:39:46 pm	1,655
Re: a comment.......... Red_Lightnin! - Tuesday, 10 May, 2011, at 3:45:54 pm	1,837
Re: a comment.......... Blackboxst - Thursday, 12 May, 2011, at 11:22:44 am	1,536
Re: a comment.......... iamampd - Tuesday, 19 July, 2011, at 12:57:56 am	1,731
CURVN8R(2) is finally home again! Lawdevil & CURVN8R - Saturday, 16 July, 2011, at 1:52:36 pm	1,664
So, "confidence in a good outcome" wasn't misplaced! *NM* Laz - Saturday, 16 July, 2011, at 4:28:26 pm	911
Re: CURVN8R(2) is finally home again! Guenter in Ontario - Monday, 18 July, 2011, at 6:22:17 pm	850
replacement tires for discontinued model danz76 - Thursday, 23 June, 2011, at 11:54:03 am	2,837
Re: replacement tires for discontinued model mikefocke, '01S Sanford, NC - Thursday, 23 June, 2011, at 12:13:43 pm	1,344
Check the car's owners manual for any guidelines. At one time I was under the impression (long... MarcW - Thursday, 23 June, 2011, at 2:58:46 pm	1,159
Isn't he talking about model, not N numbers? Sports Contact 3 mixed with 2. Danz, please clarify. Laz - Thursday, 23 June, 2011, at 3:20:02 pm	1,306
Re: Isn't he talking about model, not N numbers? Sports Contact 3 mixed with 2. Danz, please clarify. danz76 - Wednesday, 6 July, 2011, at 11:46:22 pm	1,447
My previous response then I think applies. Were I faced with the same situation unless.... MarcW - Thursday, 7 July, 2011, at 2:20:21 pm	1,174
Re: My previous response then I think applies. Were I faced with the same situation unless.... danz76 - Sunday, 17 July, 2011, at 9:38:01 pm	1,330
Welcome!... Pedro (Odessa, FL) - Monday, 18 July, 2011, at 10:07:11 am	1,242
Re: Welcome!... danz76 - Monday, 18 July, 2011, at 2:19:05 pm	1,370
You've got mail! *NM* Pedro (Odessa, FL) - Monday, 18 July, 2011, at 3:05:33 pm	1,382
Small accident - need new bumper - advice needed Bruce In Philly (2000 S Boxster, now '09 C2S) - Sunday, 3 July, 2011, at 1:32:53 pm	1,914
Update.... I posted a littel to quickly. Bruce In Philly (2000 S Boxster, now '09 C2S) - Sunday, 3 July, 2011, at 2:05:05 pm	1,067
OTOH, your friend would have said let my insurance take care of this and if he had to... MarcW - Sunday, 3 July, 2011, at 5:04:13 pm	950
Thanx - all new parts, his insurance will cover - Anyone heard of these collision places? Bruce In Philly (2000 S Boxster, now '09 C2S) - Sunday, 3 July, 2011, at 7:21:53 pm	1,060
Re: Thanx - all new parts, his insurance will cover - Anyone heard of these collision places? whall - Monday, 4 July, 2011, at 9:45:50 am	1,123
I'm pretty sure it can be repaired, not replaced Boxsterra - Tuesday, 5 July, 2011, at 1:02:00 pm	1,159
I agree with Boxsterra. The bumper skin ... Pedro (Odessa, FL) - Tuesday, 5 July, 2011, at 3:36:34 pm	1,142
Look for misalignments where other body panels meet. *NM* Laz - Tuesday, 5 July, 2011, at 6:28:32 pm	1,078
Update - new bumper fully covered, no out of pocket costs Bruce In Philly (2000 S Boxster, now '09 C2S) - Wednesday, 6 July, 2011, at 9:14:24 pm	1,117
You realize that your friend's insurance increases proportionally to the cost of the repair? *NM* Boxsterra - Thursday, 7 July, 2011, at 2:35:42 pm	1,090
So? The friend should have exerted more care. I can't see how a true friend would insist... MarcW - Thursday, 7 July, 2011, at 2:58:26 pm	1,184
He started by asking how to reduce his friend's cost Boxsterra - Thursday, 7 July, 2011, at 10:59:59 pm	1,003
This is analogous to the repairing vs. replacing discussion concerning mechanical components. Laz - Friday, 8 July, 2011, at 9:31:21 am	986
Ok. And if a shop can't produce a good job using a new bumper cover using a salvaged one... MarcW - Friday, 8 July, 2011, at 1:21:30 pm	1,145
The insurance goes through this used/salvaged bumper exercise because it usually works... MarcW - Thursday, 7 July, 2011, at 2:56:22 pm	1,083
Re: Small accident - need new bumper - advice needed Charlie in Limerick, Pa. - Wednesday, 6 July, 2011, at 10:04:37 pm	1,118
Re: Small accident - need new bumper - advice needed AndyInNYC - Monday, 18 July, 2011, at 10:34:03 am	1,130
NEXT dak911 - Wednesday, 13 July, 2011, at 6:50:13 pm	1,832
Should I say congrats?.... Pedro (Odessa, FL) - Thursday, 14 July, 2011, at 9:39:17 am	978
Re: NEXT db997S - Thursday, 14 July, 2011, at 1:57:41 pm	932
Have you driven the TIP? Red_Lightnin! - Thursday, 14 July, 2011, at 3:50:48 pm	1,114
Re: NEXT Alcantera - Friday, 15 July, 2011, at 9:10:33 am	908
No regrets since picking up my 97 C4S with 85K miles Carlos (no longer in Vegas) - Sunday, 17 July, 2011, at 1:19:56 pm	1,008
New Stereo 2000 Boxster kosiba - Tuesday, 12 July, 2011, at 3:58:58 pm	1,811
You can connect a bluetooth adapter to your current stereo Boxsterra - Tuesday, 12 July, 2011, at 5:06:03 pm	982
You're right about that: garish lighting and too many unergonomic controls. *NM* Laz - Tuesday, 12 July, 2011, at 6:29:52 pm	964
Re: You can connect a bluetooth adapter to your current stereo Brasco - Tuesday, 12 July, 2011, at 8:35:55 pm	979
I am referring to getting the audio through your stereo Boxsterra - Wednesday, 13 July, 2011, at 6:56:46 am	984
Re: You can connect a bluetooth adapter to your current stereo kosiba - Friday, 15 July, 2011, at 3:29:40 pm	940
CDR-220 has aux-in. You just need the Becker cable. Boxsterra - Saturday, 16 July, 2011, at 7:53:14 am	3,449
here is the Becker plug info... tampamark - Saturday, 16 July, 2011, at 9:05:31 pm	999
959 Info (NBC) nmanitou (Doug in MI) - Thursday, 14 July, 2011, at 4:09:21 pm	1,674
Required about $$$$ mods each IIRC to federalize mikefocke, '01S Sanford, NC - Thursday, 14 July, 2011, at 9:43:46 pm	948
Great links, mike. *NM* Laz - Thursday, 14 July, 2011, at 10:03:05 pm	934
Re: Required about $$$$ mods each IIRC to federalize nmanitou (Doug in MI) - Friday, 15 July, 2011, at 7:46:50 am	1,147
Here's a thread discussing Gates and the 959 Laz - Thursday, 14 July, 2011, at 10:13:14 pm	1,108
And what I'd like to have as street legal: Laz - Thursday, 14 July, 2011, at 10:18:19 pm	1,106
I saw one this spring while my car was in the shop for repairs. What they are capable of Naples986 - Friday, 15 July, 2011, at 5:45:52 pm	929
You're likely not fond of the GT1 either. Laz - Friday, 15 July, 2011, at 7:06:52 pm	890
"You're likely not fond of the GT1 either." I'll give them a pass since it was really a race car Naples986 - Saturday, 16 July, 2011, at 12:21:12 am	1,045
The Panamera convertible at least gets rid of the badly resolved slope of the hardtop's roof. Laz - Saturday, 16 July, 2011, at 11:18:10 am	844
cigarette lighter plug replacement boxsterd - Friday, 8 July, 2011, at 1:13:25 am	2,054
try this................. Harvey in FL - Friday, 8 July, 2011, at 8:55:55 am	888
One caveat Boxsterra - Friday, 8 July, 2011, at 8:59:04 am	859
Re: try this................. boxsterd - Tuesday, 12 July, 2011, at 7:41:44 pm	897
incorrect... panel and radio are two (sometimes 4) separate things depending on MY... Burg Boxster - Tuesday, 12 July, 2011, at 8:34:43 pm	882
Burg is correct Boxsterra - Wednesday, 13 July, 2011, at 6:58:45 am	867
Re: Burg is correct boxsterd - Thursday, 14 July, 2011, at 11:58:38 pm	968
It's a separate piece, really *NM* Boxsterra - Saturday, 16 July, 2011, at 8:01:01 am	913
Re: Burg is correct CarreraLicious - Saturday, 16 July, 2011, at 10:41:33 am	824
possible to print from this site? JACK LONGISLAND - Friday, 15 July, 2011, at 1:15:26 pm	1,508
We don't have... Pedro (Odessa, FL) - Friday, 15 July, 2011, at 3:36:36 pm	938
Click the "Print View" near the top Boxsterra - Saturday, 16 July, 2011, at 7:54:39 am	919
For you Gen 2 Boxster owners with DFI.. MikenOH - Friday, 15 July, 2011, at 11:01:04 am	1,697
Re: For you Gen 2 Boxster owners with DFI.. db997S - Friday, 15 July, 2011, at 11:40:37 am	1,122
I have not heard anything specific but have read at least one post in which the writer... MarcW - Friday, 15 July, 2011, at 5:57:18 pm	1,017
I want this pcar ... heading out to buy lottery tickets Harvey in FL - Tuesday, 12 July, 2011, at 3:12:00 pm	1,984
There's also a good write up on Page B-3 of today's USA Today db997S - Tuesday, 12 July, 2011, at 3:28:43 pm	996
Great attention to detail, but ... Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 10:04:15 am	1,084
that's really nice. ain't cheap though. *NM* frogster - Tuesday, 12 July, 2011, at 3:48:44 pm	1,038
Re: I want this pcar ... heading out to buy lottery tickets boxsterd - Tuesday, 12 July, 2011, at 7:40:36 pm	968
Re: I want this pcar ... heading out to buy lottery tickets BoxsterBob - San Carlos - Tuesday, 12 July, 2011, at 10:55:05 pm	834
The Singer is a 964 frogster - Wednesday, 13 July, 2011, at 12:28:58 pm	1,062
Re: The Singer is a 964 boxsterd - Wednesday, 13 July, 2011, at 3:27:19 pm	974
Re: I want this pcar ... heading out to buy lottery tickets Clarkaddison - Wednesday, 13 July, 2011, at 10:34:58 am	893
A great year. I recall the brochure with, I think, a blue one in a field with melting snow. Laz - Wednesday, 13 July, 2011, at 11:01:30 am	1,160
Re: I want this pcar ... heading out to buy lottery tickets jpv42 - Wednesday, 13 July, 2011, at 8:29:22 pm	898
Re: I want this pcar ... heading out to buy lottery tickets SPG356 - Wednesday, 13 July, 2011, at 8:59:57 pm	901
Re: I want this pcar . SPG356 - Wednesday, 13 July, 2011, at 9:40:22 pm	1,002
Re: I want this pcar . Clarkaddison - Thursday, 14 July, 2011, at 10:39:34 am	1,174
Car & Driver had an article this month on a guy who does this with '69 Cameros (Vette engine) *NM* db997S - Thursday, 14 July, 2011, at 10:13:05 am	982
you guys who don't subscribe old timer - Friday, 15 July, 2011, at 12:22:03 pm	950
MAF question marty - Tuesday, 5 July, 2011, at 9:12:31 am	1,659
You may have... Pedro (Odessa, FL) - Tuesday, 5 July, 2011, at 9:18:21 am	863
Re: MAF question marty - Friday, 15 July, 2011, at 6:00:14 am	890
tire pressures - 18"'ers on a 986S. Petee_C - Wednesday, 13 July, 2011, at 4:41:32 pm	1,620
Re: tire pressures - 18"'ers on a 986S. Dave In MD - Thursday, 14 July, 2011, at 6:41:34 am	1,036
I run stock pressures for regular street Red_Lightnin! - Thursday, 14 July, 2011, at 3:54:10 pm	1,185
Bear Manor Fun Run / Exotic Car show Guenter in Ontario - Monday, 11 July, 2011, at 7:19:51 pm	2,401
Re: Bear Manor Fun Run / Exotic Car show jwdbox - Tuesday, 12 July, 2011, at 9:20:30 am	968
Re: Bear Manor Fun Run / Exotic Car show Guenter in Ontario - Tuesday, 12 July, 2011, at 2:09:32 pm	725
the second Healey pic was my first car........... Harvey in FL - Tuesday, 12 July, 2011, at 3:19:28 pm	892
Re: the second Healey pic was my first car........... Guenter in Ontario - Wednesday, 13 July, 2011, at 8:19:54 am	901
Re: Bear Manor Fun Run / Exotic Car show Roger987 - Thursday, 14 July, 2011, at 10:40:32 am	767
Re: Bear Manor Fun Run / Exotic Car show Guenter in Ontario - Thursday, 14 July, 2011, at 11:09:31 am	746
I've said it before... Roger987 - Thursday, 14 July, 2011, at 12:12:36 pm	853
Spark Plug Replacement - Smooth Sailing... r9i8c7k - Tuesday, 12 July, 2011, at 2:31:59 am	1,897
Ever see a Golden Lodge, used on Alfa Romeos? Laz - Tuesday, 12 July, 2011, at 6:31:49 pm	1,766
Re: Spark Plug Replacement - Smooth Sailing... BoxsterBob - San Carlos - Tuesday, 12 July, 2011, at 10:57:27 pm	888
Re: Spark Plug Replacement - Smooth Sailing... r9i8c7k - Wednesday, 13 July, 2011, at 2:48:27 pm	900
Re: Spark Plug Replacement - Smooth Sailing... BoxsterBob - San Carlos - Wednesday, 13 July, 2011, at 9:30:27 pm	844
Does anybody know the cost and a shop to replace the rear window in a 2001 S in MN? *NM* John from MN - Saturday, 9 July, 2011, at 10:13:54 pm	1,655
Re: Does anybody know the cost and a shop to replace the rear window in a 2001 S in MN? BoxsterBob - San Carlos - Saturday, 9 July, 2011, at 11:23:43 pm	901
Re: Does anybody know the cost and a shop to replace the rear window in a 2001 S in MN? MN 986 - Wednesday, 13 July, 2011, at 12:10:14 pm	964
Flashing coolant light sdm100 - Monday, 11 July, 2011, at 11:42:47 am	1,745
If the coolant level is good... Pedro (Odessa, FL) - Monday, 11 July, 2011, at 12:02:33 pm	893
Re: If the coolant level is good... Eric in Dallas - Monday, 11 July, 2011, at 12:06:10 pm	882
You are correct. I'd forgotten about that. Good catch. *NM* Pedro (Odessa, FL) - Monday, 11 July, 2011, at 12:43:34 pm	872
Re: Flashing coolant light sdm100 - Monday, 11 July, 2011, at 3:18:45 pm	1,028
No... Pedro (Odessa, FL) - Monday, 11 July, 2011, at 3:56:38 pm	1,522
Re: Flashing coolant light Brasco - Monday, 11 July, 2011, at 8:05:52 pm	882
Re: Flashing coolant light Brasco - Monday, 11 July, 2011, at 8:22:33 pm	818
Re: Flashing coolant light sdm100 - Tuesday, 12 July, 2011, at 10:09:53 am	888
The only times my Porsches have gone low on fluid there was a leak.. Coolant cap (both ... MarcW - Tuesday, 12 July, 2011, at 4:41:17 pm	1,091
Re: Flashing coolant light ryebread - Tuesday, 12 July, 2011, at 5:29:05 pm	794
Where to jack up a boxster?? Brasco - Wednesday, 6 July, 2011, at 9:41:20 pm	7,779
Re: Where to jack up a boxster?? BoxsterBob - San Carlos - Wednesday, 6 July, 2011, at 11:42:48 pm	1,890
Re: Where to jack up a boxster?? Brasco - Thursday, 7 July, 2011, at 5:37:26 am	1,531
I don't agree with those instructions... Pedro (Odessa, FL) - Thursday, 7 July, 2011, at 3:28:31 pm	1,293
Re: I don't agree with those instructions... Brasco - Thursday, 7 July, 2011, at 5:42:39 pm	1,310
How abotu my method - jack under the diagonal brace where it intersects the cast member that holds grant - Thursday, 7 July, 2011, at 7:25:55 pm	1,358
If I recall correctly, that's how my indy has done it; several times successfully. *NM* Laz - Thursday, 7 July, 2011, at 7:35:05 pm	1,316
Re: I don't agree with those instructions... MikenOH - Tuesday, 12 July, 2011, at 4:09:46 pm	1,396
Yes... Pedro (Odessa, FL) - Tuesday, 12 July, 2011, at 5:08:36 pm	1,396
Re: Where to jack up a boxster?? Dale_K - Friday, 8 July, 2011, at 2:48:46 pm	2,101
You should be ... Pedro (Odessa, FL) - Friday, 8 July, 2011, at 5:10:26 pm	1,245
NBC, Went to the Cadillac CTS-V workshop yesterday at Monticello Motor Park, wow Clif R - Monday, 11 July, 2011, at 11:30:33 am	1,741
Re: NBC, Went to the Cadillac CTS-V workshop yesterday at Monticello Motor Park, wow Ed(Arizona) - Monday, 11 July, 2011, at 1:04:07 pm	999
Re: NBC, Went to the Cadillac CTS-V workshop yesterday at Monticello Motor Park, wow Clif R - Monday, 11 July, 2011, at 5:01:47 pm	930
Not as nice as you think Red_Lightnin! - Monday, 11 July, 2011, at 7:11:38 pm	1,148
Re: Not as nice as you think,all vehicles have faults like the RMS issue,D chunk catastrophic losses Clif R - Tuesday, 12 July, 2011, at 2:13:39 pm	1,499
Just in case you wanted to know who sung the "Porsche Everyday" theme music AreaOne - Tuesday, 12 July, 2011, at 8:55:35 am	1,647
Sun Records Memphis! Dave In MD - Tuesday, 12 July, 2011, at 10:03:16 am	862
Thanks for posting. Nice to hear the whole tune and know who the performer is. Laz - Tuesday, 12 July, 2011, at 11:16:08 am	887
Removing Boxster Radio kentv1 - Friday, 8 July, 2011, at 8:07:38 pm	2,597
Re: Removing Boxster Radio Alcantera - Friday, 8 July, 2011, at 8:51:04 pm	917
Those radio keys always cut up my fingers Sheriff John - Saturday, 9 July, 2011, at 12:36:55 am	961
Install the radio keys, insert 3/8" socket extensions in holes and pull on those. *NM* MarknearChicago - Saturday, 9 July, 2011, at 5:40:45 pm	964
Same thing happen to mine and it was just dirty contacts. I used a Q Tip and some rubbing alcohol. *NM* Naples986 - Monday, 11 July, 2011, at 11:14:57 pm	931
Friday Scan Day - Boxsters and Mountains Roger987 - Friday, 8 July, 2011, at 9:19:26 am	2,028
No one broke ranks and backed in. Too much risk for all those nice machines. *NM* Laz - Friday, 8 July, 2011, at 9:34:44 am	1,012
Re: Friday Scan Day - Boxsters and Mountains Guenter in Ontario - Friday, 8 July, 2011, at 10:15:58 am	988
A little farther? (Looks like somewhere near Bryce Canyon.) *NM* Laz - Friday, 8 July, 2011, at 11:04:14 am	951
Re: A little farther? (Looks like somewhere near Bryce Canyon.) Guenter in Ontario - Friday, 8 July, 2011, at 11:26:14 am	1,026
Yup... Laz - Friday, 8 July, 2011, at 12:23:47 pm	1,052
Re: Friday Scan Day - Boxsters and Mountains Roger987 - Friday, 8 July, 2011, at 1:37:07 pm	1,529
Re: Friday Scan Day - Boxsters and Mountains Guenter in Ontario - Friday, 8 July, 2011, at 9:44:53 pm	875
Waking up and ready to run.... tomstrickland - Friday, 8 July, 2011, at 2:23:30 pm	1,280
Re: Friday Scan Day - Boxsters and Mountains jwdbox - Friday, 8 July, 2011, at 4:52:12 pm	913
Re: Friday Scan Day - Boxsters and Mountains Guenter in Ontario - Friday, 8 July, 2011, at 9:38:08 pm	899
Re: Friday Scan Day - Boxsters and Mountains jwdbox - Friday, 8 July, 2011, at 10:08:42 pm	882
Too busy getting off this morning....just in the nick of time Gary in SoFL - Friday, 8 July, 2011, at 6:19:42 pm	985
Re: Friday Scan Day - Boxsters and Mountains Lars/Chattanooga - Friday, 8 July, 2011, at 6:21:56 pm	1,451
Re: Friday Scan Day - Boxsters and Mountains BoxsterBob - San Carlos - Saturday, 9 July, 2011, at 11:37:46 pm	906
Re: Friday Scan Day - Boxsters and Mountains KPM 05-987 - Monday, 11 July, 2011, at 9:34:14 pm	1,077
Boxster Fire in Houston PLStout (Pearland,TX) - Friday, 8 July, 2011, at 12:09:07 pm	1,766
Well, kind of like TVRs being "front" mid-engined cars. The Vixen and Tuscan models anyway. *NM* Laz - Friday, 8 July, 2011, at 12:25:38 pm	923
Fox News can't report on anything in the center. *NM* BoxsterBob - San Carlos - Saturday, 9 July, 2011, at 11:28:09 pm	946
*NM* PLStout (Pearland,TX) - Saturday, 9 July, 2011, at 11:58:24 pm	891
"They believe a flat tire may have set the car on fire". I doubt that. *NM* Paul S. - Sunday, 10 July, 2011, at 1:34:20 pm	927
This is a stretch, but aren't flat tire sealants flammable? *NM* Laz - Monday, 11 July, 2011, at 10:30:15 am	912
Re: This is a stretch, but aren't flat tire sealants flammable? Not all are. jwdbox - Monday, 11 July, 2011, at 4:56:37 pm	922
Thanks. I was thinking maybe the propellant, if not the goop. *NM* Laz - Monday, 11 July, 2011, at 8:18:47 pm	1,045
If these guys had one of the new magic engine faiure monitors the fire might have been prevented *NM* Gary in SoFL - Monday, 11 July, 2011, at 11:03:15 am	1,002
Perhaps someone mistook hydrogen for nitrogen when filling the tires. *NM* Laz - Monday, 11 July, 2011, at 8:19:47 pm	902

Forum List New Topic RSS

Page 184 of 215 Pages:

179 180 181 182 183184185 186 187 188

Main Forum

Advice on upgrading leather? IFlyLow - Sunday, 17 July, 2011, at 9:15:53 am

Have you considered leatherique? TheFarmer - Sunday, 17 July, 2011, at 11:16:37 am

Re: Have you considered leatherique? IFlyLow - Monday, 18 July, 2011, at 12:59:36 am

Have you thrown scrambled eggs at it? *NM* TheFarmer - Monday, 18 July, 2011, at 7:07:42 am

Re: Advice on upgrading leather? Alcantera - Monday, 18 July, 2011, at 7:42:57 am

Re: Advice on upgrading leather? IFlyLow - Tuesday, 19 July, 2011, at 12:29:33 am

I've been able to bring back... Pedro (Odessa, FL) - Monday, 18 July, 2011, at 10:31:43 am

Once again, Pedro, you are THE MAN IFlyLow - Wednesday, 20 July, 2011, at 3:52:13 pm

A PB Orange hat is being flown out to you *NM* Pedro (Odessa, FL) - Wednesday, 20 July, 2011, at 4:39:04 pm

Extreme difficulty refitting trunk trim Dale_K - Tuesday, 19 July, 2011, at 9:21:35 am

Go run the can opener. *NM* MarcW - Tuesday, 19 July, 2011, at 3:06:24 pm

Very cute!!! *NM* r9i8c7k - Wednesday, 20 July, 2011, at 12:43:09 pm

You'd better stop by before it's gone. (NPC) Laz - Tuesday, 19 July, 2011, at 5:20:52 pm

Bicycle Rack for 2001 Boxster? stowie27 - Monday, 18 July, 2011, at 2:55:17 pm

Willwood - I have one on my 2000 S and love it. Bruce In Philly (2000 S Boxster, now '09 C2S) - Monday, 18 July, 2011, at 4:02:45 pm

Re: Willwood - I have one on my 2000 S and love it. stowie27 - Tuesday, 19 July, 2011, at 8:57:15 am

Here's a more affordable version... Pedro (Odessa, FL) - Tuesday, 19 July, 2011, at 9:13:46 am

Re: Bicycle Rack for 2001 Boxster? Ruby - Monday, 18 July, 2011, at 5:20:16 pm

That was about 8-9 years ago... here are the prices then Bruce In Philly (2000 S Boxster, now '09 C2S) - Monday, 18 July, 2011, at 5:33:18 pm

Re: Bicycle Rack for 2001 Boxster? AndyInNYC - Tuesday, 19 July, 2011, at 12:17:10 pm

Good clarification Bruce In Philly (2000 S Boxster, now '09 C2S) - Tuesday, 19 July, 2011, at 12:32:58 pm

Too much glare from that shine to even see the bumperettes AndyInNYC - Tuesday, 19 July, 2011, at 3:35:56 pm

Is the radio the only thing to run off that fuse? Trying to determine if the radio in my '09 997 db997S - Tuesday, 19 July, 2011, at 1:15:10 pm

Earlier models have a problem with the radio getting in a goofy state. The techs tell me a work.... MarcW - Tuesday, 19 July, 2011, at 2:15:24 pm

Trip down Hwy 1 to San Louis Obispo BoxsterBob - San Carlos - Tuesday, 19 July, 2011, at 1:15:11 am

Congrats on your anniversary! *NM* IFlyLow - Tuesday, 19 July, 2011, at 1:36:04 am

Re: Congrats on your anniversary! +1 Guenter in Ontario - Tuesday, 19 July, 2011, at 9:31:37 am

Re: Congrats on your anniversary! +1 BoxsterBob - San Carlos - Tuesday, 19 July, 2011, at 11:15:21 am

Nice ... Pedro (Odessa, FL) - Tuesday, 19 July, 2011, at 10:06:21 am

Re: Nice ... MikenOH - Tuesday, 19 July, 2011, at 10:24:29 am

Am I crazy to try and do my own clutch? Dwass - Wednesday, 13 July, 2011, at 3:14:07 am

As long as the car can sit for a while and you're patient it's doable Boxsterra - Wednesday, 13 July, 2011, at 6:54:38 am

Re: As long as the car can sit for a while and you're patient it's doable IFlyLow - Wednesday, 13 July, 2011, at 12:42:48 pm

Re: As long as the car can sit for a while and you're patient it's doable Dwass - Wednesday, 13 July, 2011, at 2:24:39 pm

It might be a big help to have to engine support bar the dealers use to hold the engine in place. *NM* Laz - Wednesday, 13 July, 2011, at 11:02:58 am

Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place. IFlyLow - Wednesday, 13 July, 2011, at 12:44:23 pm

Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place. Dwass - Wednesday, 13 July, 2011, at 2:27:04 pm

Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place. Petee_C - Wednesday, 13 July, 2011, at 4:45:51 pm

If you have a big area... Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 5:18:14 pm

Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place. Dwass - Wednesday, 13 July, 2011, at 2:27:47 pm

This works as good or better... Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 3:48:31 pm

The new Techno-Bar product *NM* Gary in SoFL - Wednesday, 13 July, 2011, at 3:51:09 pm

Re: This works as good or better... Dwass - Wednesday, 13 July, 2011, at 3:54:50 pm

Those are... Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 4:02:00 pm

But they are not "Pedro Orange" ---- Would a jack (like listed below) work?? tomstrickland - Wednesday, 13 July, 2011, at 5:13:02 pm

Either one of those... Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 5:23:44 pm

Just did mine last month. IFlyLow - Wednesday, 13 July, 2011, at 12:40:47 pm

Re: Just did mine last month. Dwass - Wednesday, 13 July, 2011, at 2:09:38 pm

Re: Just did mine last month. Dwass - Wednesday, 13 July, 2011, at 2:29:20 pm

Re: Just did mine last month. IFlyLow - Thursday, 14 July, 2011, at 1:55:18 pm

That's a great deal Boxsterra - Thursday, 14 July, 2011, at 7:52:10 pm

Not necessarily... dghii - Friday, 15 July, 2011, at 3:05:05 pm

a comment...... por911(bc) - Wednesday, 13 July, 2011, at 4:14:05 pm

Re: a comment...... Dwass - Wednesday, 13 July, 2011, at 5:35:54 pm

Re: a comment...... por911(bc) - Wednesday, 13 July, 2011, at 6:06:11 pm

How tall is the transmission? Dwass - Wednesday, 13 July, 2011, at 5:33:21 pm

You'll need very tall stands *NM* Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 5:53:34 pm

Go to this Pelican Parts page to get an idea Laz - Wednesday, 13 July, 2011, at 7:39:15 pm

Re: Am I crazy to try and do my own clutch? Ed(Arizona) - Wednesday, 13 July, 2011, at 8:07:56 pm

Engine-transmission alignment isn't just tricky. If the input shaft gets bent... Laz - Thursday, 14 July, 2011, at 10:35:02 pm

You would have to try pretty hard to bend the input shaft Boxsterra - Friday, 15 July, 2011, at 9:13:41 am

Re: You would have to try pretty hard to bend the input shaft Laz - Friday, 15 July, 2011, at 10:10:47 am

Re: Am I crazy to try and do my own clutch? Dwass - Sunday, 17 July, 2011, at 6:59:40 pm

So here's where I'm at... Dwass - Sunday, 17 July, 2011, at 6:37:57 pm

Don't run the risk... Pedro (Odessa, FL) - Monday, 18 July, 2011, at 10:11:25 am

Re: Don't run the risk... Dwass - Monday, 18 July, 2011, at 5:50:18 pm

If the clutch is slipping... MarcW - Monday, 18 July, 2011, at 6:08:08 pm

Re: If the clutch is slipping... Dwass - Monday, 18 July, 2011, at 7:00:02 pm

The RMS seal installation video looks ok. It appears to be crude but I've installed other seals... MarcW - Monday, 18 July, 2011, at 10:41:45 pm

RMS is trickier than you might think. IFlyLow - Tuesday, 19 July, 2011, at 12:25:28 am

Re: RMS is trickier than you might think. Dwass - Tuesday, 19 July, 2011, at 3:50:44 am

Help ! With my stalling 2000 boxster please.......... Blackboxst - Tuesday, 3 May, 2011, at 3:03:07 pm

Running the car with the MAF disconnected ... Pedro (Odessa, FL) - Tuesday, 3 May, 2011, at 3:26:47 pm

Re: Help ! With my stalling 2000 boxster please.......... Dale_K - Wednesday, 4 May, 2011, at 4:19:29 pm

Re: Help ! With my stalling 2000 boxster please.......... Blackboxst - Wednesday, 4 May, 2011, at 7:47:53 pm

Re: Help ! With my stalling 2000 boxster please.......... LocoDriver - Wednesday, 4 May, 2011, at 7:00:56 pm

Re: Help ! With my stalling 2000 boxster please.......... Blackboxst - Wednesday, 4 May, 2011, at 7:41:04 pm

My first thought is diagnose, don't replace grant - Wednesday, 4 May, 2011, at 7:56:18 pm

Re: My first thought is diagnose, don't replace Blackboxst - Wednesday, 4 May, 2011, at 8:12:03 pm

Advice on upgrading leather?
IFlyLow - Sunday, 17 July, 2011, at 9:15:53 am

Have you considered leatherique?
TheFarmer - Sunday, 17 July, 2011, at 11:16:37 am

Re: Have you considered leatherique?
IFlyLow - Monday, 18 July, 2011, at 12:59:36 am

Have you thrown scrambled eggs at it? NM
TheFarmer - Monday, 18 July, 2011, at 7:07:42 am

Re: Advice on upgrading leather?
Alcantera - Monday, 18 July, 2011, at 7:42:57 am

Re: Advice on upgrading leather?
IFlyLow - Tuesday, 19 July, 2011, at 12:29:33 am

I've been able to bring back...
Pedro (Odessa, FL) - Monday, 18 July, 2011, at 10:31:43 am

Once again, Pedro, you are THE MAN
IFlyLow - Wednesday, 20 July, 2011, at 3:52:13 pm

A PB Orange hat is being flown out to you NM
Pedro (Odessa, FL) - Wednesday, 20 July, 2011, at 4:39:04 pm

Extreme difficulty refitting trunk trim
Dale_K - Tuesday, 19 July, 2011, at 9:21:35 am

Go run the can opener. NM
MarcW - Tuesday, 19 July, 2011, at 3:06:24 pm

Very cute!!! NM
r9i8c7k - Wednesday, 20 July, 2011, at 12:43:09 pm

You'd better stop by before it's gone. (NPC)
Laz - Tuesday, 19 July, 2011, at 5:20:52 pm

Bicycle Rack for 2001 Boxster?
stowie27 - Monday, 18 July, 2011, at 2:55:17 pm

Willwood - I have one on my 2000 S and love it.
Bruce In Philly (2000 S Boxster, now '09 C2S) - Monday, 18 July, 2011, at 4:02:45 pm

Re: Willwood - I have one on my 2000 S and love it.
stowie27 - Tuesday, 19 July, 2011, at 8:57:15 am

Here's a more affordable version...
Pedro (Odessa, FL) - Tuesday, 19 July, 2011, at 9:13:46 am

Re: Bicycle Rack for 2001 Boxster?
Ruby - Monday, 18 July, 2011, at 5:20:16 pm

That was about 8-9 years ago... here are the prices then
Bruce In Philly (2000 S Boxster, now '09 C2S) - Monday, 18 July, 2011, at 5:33:18 pm

Re: Bicycle Rack for 2001 Boxster?
AndyInNYC - Tuesday, 19 July, 2011, at 12:17:10 pm

Good clarification
Bruce In Philly (2000 S Boxster, now '09 C2S) - Tuesday, 19 July, 2011, at 12:32:58 pm

Too much glare from that shine to even see the bumperettes
AndyInNYC - Tuesday, 19 July, 2011, at 3:35:56 pm

Is the radio the only thing to run off that fuse? Trying to determine if the radio in my '09 997
db997S - Tuesday, 19 July, 2011, at 1:15:10 pm

Earlier models have a problem with the radio getting in a goofy state. The techs tell me a work....
MarcW - Tuesday, 19 July, 2011, at 2:15:24 pm

Trip down Hwy 1 to San Louis Obispo
BoxsterBob - San Carlos - Tuesday, 19 July, 2011, at 1:15:11 am

Congrats on your anniversary! NM
IFlyLow - Tuesday, 19 July, 2011, at 1:36:04 am

Re: Congrats on your anniversary! +1
Guenter in Ontario - Tuesday, 19 July, 2011, at 9:31:37 am

Re: Congrats on your anniversary! +1
BoxsterBob - San Carlos - Tuesday, 19 July, 2011, at 11:15:21 am

Nice ...
Pedro (Odessa, FL) - Tuesday, 19 July, 2011, at 10:06:21 am

Re: Nice ...
MikenOH - Tuesday, 19 July, 2011, at 10:24:29 am

Am I crazy to try and do my own clutch?
Dwass - Wednesday, 13 July, 2011, at 3:14:07 am

As long as the car can sit for a while and you're patient it's doable
Boxsterra - Wednesday, 13 July, 2011, at 6:54:38 am

Re: As long as the car can sit for a while and you're patient it's doable
IFlyLow - Wednesday, 13 July, 2011, at 12:42:48 pm

Re: As long as the car can sit for a while and you're patient it's doable
Dwass - Wednesday, 13 July, 2011, at 2:24:39 pm

It might be a big help to have to engine support bar the dealers use to hold the engine in place. NM
Laz - Wednesday, 13 July, 2011, at 11:02:58 am

Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place.
IFlyLow - Wednesday, 13 July, 2011, at 12:44:23 pm

Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place.
Dwass - Wednesday, 13 July, 2011, at 2:27:04 pm

Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place.
Petee_C - Wednesday, 13 July, 2011, at 4:45:51 pm

If you have a big area...
Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 5:18:14 pm

Re: It might be a big help to have to engine support bar the dealers use to hold the engine in place.
Dwass - Wednesday, 13 July, 2011, at 2:27:47 pm

This works as good or better...
Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 3:48:31 pm

The new Techno-Bar product NM
Gary in SoFL - Wednesday, 13 July, 2011, at 3:51:09 pm

Re: This works as good or better...
Dwass - Wednesday, 13 July, 2011, at 3:54:50 pm

Those are...
Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 4:02:00 pm

But they are not "Pedro Orange" ---- Would a jack (like listed below) work??
tomstrickland - Wednesday, 13 July, 2011, at 5:13:02 pm

Either one of those...
Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 5:23:44 pm

Just did mine last month.
IFlyLow - Wednesday, 13 July, 2011, at 12:40:47 pm

Re: Just did mine last month.
Dwass - Wednesday, 13 July, 2011, at 2:09:38 pm

Re: Just did mine last month.
Dwass - Wednesday, 13 July, 2011, at 2:29:20 pm

Re: Just did mine last month.
IFlyLow - Thursday, 14 July, 2011, at 1:55:18 pm

That's a great deal
Boxsterra - Thursday, 14 July, 2011, at 7:52:10 pm

Not necessarily...
dghii - Friday, 15 July, 2011, at 3:05:05 pm

a comment......
por911(bc) - Wednesday, 13 July, 2011, at 4:14:05 pm

Re: a comment......
Dwass - Wednesday, 13 July, 2011, at 5:35:54 pm

Re: a comment......
por911(bc) - Wednesday, 13 July, 2011, at 6:06:11 pm

How tall is the transmission?
Dwass - Wednesday, 13 July, 2011, at 5:33:21 pm

You'll need very tall stands NM
Pedro (Odessa, FL) - Wednesday, 13 July, 2011, at 5:53:34 pm

Go to this Pelican Parts page to get an idea
Laz - Wednesday, 13 July, 2011, at 7:39:15 pm

Re: Am I crazy to try and do my own clutch?
Ed(Arizona) - Wednesday, 13 July, 2011, at 8:07:56 pm

Engine-transmission alignment isn't just tricky. If the input shaft gets bent...
Laz - Thursday, 14 July, 2011, at 10:35:02 pm

You would have to try pretty hard to bend the input shaft
Boxsterra - Friday, 15 July, 2011, at 9:13:41 am

Re: You would have to try pretty hard to bend the input shaft
Laz - Friday, 15 July, 2011, at 10:10:47 am

Re: Am I crazy to try and do my own clutch?
Dwass - Sunday, 17 July, 2011, at 6:59:40 pm

So here's where I'm at...
Dwass - Sunday, 17 July, 2011, at 6:37:57 pm

Don't run the risk...
Pedro (Odessa, FL) - Monday, 18 July, 2011, at 10:11:25 am

Re: Don't run the risk...
Dwass - Monday, 18 July, 2011, at 5:50:18 pm

If the clutch is slipping...
MarcW - Monday, 18 July, 2011, at 6:08:08 pm

Re: If the clutch is slipping...
Dwass - Monday, 18 July, 2011, at 7:00:02 pm

The RMS seal installation video looks ok. It appears to be crude but I've installed other seals...
MarcW - Monday, 18 July, 2011, at 10:41:45 pm

RMS is trickier than you might think.
IFlyLow - Tuesday, 19 July, 2011, at 12:25:28 am

Re: RMS is trickier than you might think.
Dwass - Tuesday, 19 July, 2011, at 3:50:44 am

Help ! With my stalling 2000 boxster please..........
Blackboxst - Tuesday, 3 May, 2011, at 3:03:07 pm

Running the car with the MAF disconnected ...
Pedro (Odessa, FL) - Tuesday, 3 May, 2011, at 3:26:47 pm

Re: Help ! With my stalling 2000 boxster please..........
Dale_K - Wednesday, 4 May, 2011, at 4:19:29 pm

Re: Help ! With my stalling 2000 boxster please..........
Blackboxst - Wednesday, 4 May, 2011, at 7:47:53 pm

Re: Help ! With my stalling 2000 boxster please..........
LocoDriver - Wednesday, 4 May, 2011, at 7:00:56 pm

Re: Help ! With my stalling 2000 boxster please..........
Blackboxst - Wednesday, 4 May, 2011, at 7:41:04 pm

My first thought is diagnose, don't replace
grant - Wednesday, 4 May, 2011, at 7:56:18 pm

Re: My first thought is diagnose, don't replace
Blackboxst - Wednesday, 4 May, 2011, at 8:12:03 pm

Not oiling a filter than requires oiling can put the MAF at risk (and the engine....)....
MarcW - Wednesday, 4 May, 2011, at 8:49:33 pm