Here are some headers that people have liked:
[
www.ebay.com]
For the 2.7 and 3.2 liter engines when installing equal length headers you will also need primary cats bypass tubes, such as these:
[
www.ebay.com]
The parts are not that difficult to install.
The TechnoPower Kit should take around 2 hours, working at a slow pace with basic tools.
The exhaust requires the vehicle to be raised since the work is done underneath and should be 2-3 hours (with no surprises).
When replacing exhaust components on older cars there is always the possibility that one or more exhaust manifold or flange bolts will break.
If that happens, the extraction of the bolt can get expensive.
When we work on replacing these parts on older cars, we liberally spray the bolts with penetrating oil such as PB Blaster and let it soak overnight.
The next morning in order to facilitate removal of the bolt, we heat the engine block with a torch while trying to keep the bolt as cold as possible by not touching it with the flame and by attaching a heat sink to the hex head.
Happy Boxstering,
Pedro
Pedro Bonilla1998 Boxster 986 - 311,000+ miles:
[www.PedrosGarage.com]
PCA National Club Racing Scrutineer - PCA National HPDE Instructor - PCA Technical Committee (Boxster/Cayman)
Racecar spelled backwards is Racecar
"Racing is life. Anything before or after is just waiting" ... Steve McQueen as Michael Delaney in "LeMans"
"If you wait, all that happens is that you get older"... Mario Andretti
"Being second is to be the first of the ones who lose" ... Ayrton Senna