Thanks Pedro!!!
I am curious if you have had any experience changing the rear brake rotors on a 981. While I am not at the point where this is an issue yet, I was studying the 981 WSM and noticed two things on which I would appreciate some input.
1) In order to replace the rear rotors the electronic parking brake must be put in the "service position". Of course the WSM says to use the PIWIS Tester to do so. Is there another solution, such as Durametric, or something "onboard" (for example, my Mercedes ML350 has a means of doing this using an "onboard" system).
2) The WSM states "When replacing the (rear) brake discs and/or shoes, it is necessary to grind down the brake shoes for the electronic parking brake (EP
. The routine is started using the PIWIS Tester II." Is this really necessary? I could possibly see it if the shoes were replaced but if only the rotor is replaced I'm skeptical. And if necessary, is a tool such as Durametric capable of performing the functions of the PIWIS?
Thanks in advance.