... other than the creaking may get worse. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... the dust shield that's bent in too far and rubs against the rotor. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... on all counts! Congrats. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
I now use this contraption: Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... some very dried-out leather using steam. Low pressure steam from the backside of the leather can many times re-hydrate the hide. Take the seat out and pull the leather off the foam. From the back of the material, use low pressure steam working slowly every part of the damaged leather and it's surround. Once the leather is rehydrated and smooth on the front, put it back on the foam and drape aby Pedro (Odessa, FL) - Main Forum
... of not replacing (upgrading) the IMS bearing. I've always said that the IMS bearing in an M96 engine is like a man's prostate. It will fail, given time. You should replace it when it's less of an expense, such as when you've dropped the tranny. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... to South Florida. Glad you have some good wet-weather rubber. We're going to have afternoon thunderstorms every day for the next few months. Hope we can meet one day soon. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... any DIY articles here. Was it maybe one of the DIY projects at PedrosGarage.com? If so, contact me directly at: Pedro@PedrosGarage.com and I can help you. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... or are you in mourning? I'll try to find you a Green/Beige, TIPTRONIC, 993 Cab. Happy Waiting, Pedroby Pedro (Odessa, FL) - Main Forum
... can support the engine, but they would be in the way. Also, you can't leave the weight of the engine on a hydraulic jack. If the pressure of the hydraulic fluid drops, so will the engine. You need something that holds the engine securely yet is non-intrusive. That's why I like the blocks of wood. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... such as a pallet jack, the oil pan is strong enough, because it distributes the weight evenly throughout the whole oil pan. But it is NOT safe to put a jack (with a small area) under the oil pan to support the weight of the entire engine. I have seen several that have cracked that way. There's a strong point just in front of the oil pan that can take the weight of the engine on a jack. Happyby Pedro (Odessa, FL) - Main Forum
Two-by-fours cut to whatever was available (probably 6 inches or so). The car was on a lift, but stands will work as well. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... than the engine support bar. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... what is up with the tachometer? Happy Porsche-ing,, Pedroby Pedro (Odessa, FL) - Main Forum
QuoteCan I still jack the @ rear skid plate if I have the technobar in place? The TechnoBrace doesn't change anything structurally other than strengthening the lower end of the rear suspension. Happy Boxstering, Pedro.by Pedro (Odessa, FL) - Main Forum
... you have to troubleshoot it. You can lightly tap the sides of the coolant reservoir to see if the float releases and/or you can test for the engine vent fan (right side) to see if it cycles on when hot. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
n/tby Pedro (Odessa, FL) - Main Forum
... then the problem is the level sensor or it's connection. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... scared of jacking with a 2 x 4. I've seen them buckle that way. The body at that point is not strong enough. It can and will dent; enough that the 2 x 4 can roll off and the car ... The rear central point is perfectly balanced and structurally sound. Happy Boxstering, Pedroby Pedro (Odessa, FL) - Main Forum
... all of those high-performance brake fluids are good. But I follow my own strict rule: Replace ALL the fluid before every DE. Since I run 10 DEs per year I look for the best bang-for-my-buck product which is ATE. I've never had brake fade following my rule. Since replaced the fluid in April and haven't done any DEs since then, you should be good to go. You would have to be really fast and aggrby Pedro (Odessa, FL) - Main Forum
n/tby Pedro (Odessa, FL) - Main Forum
... you are going to bend the seam and worst case your car can fall off the jack. You should ONLY put a jack under one of the four jacking points which are structurally made for this. The best way to put a car on 2 stands on the rear is: Place the jack under the right front jacking point and lift until you can place a jackstand under the right rear jacking point. Do the same on the left side ofby Pedro (Odessa, FL) - Main Forum