Show all posts by userDiscussion of Boxsters and other Porsches |
Thanks for the response, the parking brake light is working. I just tested the pin connector for the latch microswitch and I am only receiving 4.5v. Would that mean that the relay is bad?by avisalem155 - Main Forum
Quoteavisalem155 Hi All, So update since last post, I had to take my car to Porsche as a local Indie dealer said I needed a alarm module and new Key. $1200 later my windows are working! The top is still not working though and the windows won't drop when opening the latch. I found a post somewhere on testing the relay panel (where the double convertible top relay plugs in), and it seems that wheby avisalem155 - Main Forum
Hi All, So update since last post, I had to take my car to Porsche as a local Indie dealer said I needed a alarm module and new Key. $1200 later my windows are working! The top is still not working though and the windows won't drop when opening the latch. I found a post somewhere on testing the relay panel (where the double convertible top relay plugs in), and it seems that when checking voltagby avisalem155 - Main Forum
Correction, now the alarm is giving me the double beep with fault code 34 for internal sensor issueby avisalem155 - Main Forum
Hi All, I received my durametric. Cleared all faults in the CLU, retested the locking system and everything seems good, no beeps or fault codes. But my windows still don't work. I checked resistance to the window switched from the motor, it is good, but still no 12v at the switches. There is 12v to the motor. I would say the window motor is bad but the windows will drop and close when using theby avisalem155 - Main Forum
I just tested the window switches again, no power going to them. I tried following schematics I fcround online and am confused. Does the power run through the window motor first before running to the left switch? Can anyone help me troubleshoot no power getting to the switch? Again, the fuses are good. Thanks!by avisalem155 - Main Forum
by avisalem155 - Main Forum
Thanks Pedro, I checked D6, it's good, I thought the corresponding fuses were C3 and D1, either way, all are good. I just took out the CLU and inspected the internals, all looks good, I will try and upload a picture of it. I think I need to look at the relay next, any instructions on how to test it? I'm at a loss.by avisalem155 - Main Forum
Hi Pedro, I have, and it's good. I am wondering if the relay could be the culprit, if so, how can I bypass it to test if that is the issue. I know it can be jumped with a wire, but I am not sure to which terminals on the relay board.by avisalem155 - Main Forum
Hi All, Last week the positive cable on my car broke off and my car was left with no power. In order for me to pop the hood to access the battery, I initially tried putting 12 volts directly to the C3 and D1 fuses. I think I burned something out. My interior lights work, the window drops when opening and closing the door, but both power windows and my convertable top don't wor. Any ideas what itby avisalem155 - Main Forum