Change HistoryDiscussion of Boxsters and other Porsches |  |  |
Expect the best, and accept no substitute. |
Products for your Boxster, Cayman and Carrera. |
 | |
Message: Re: My trick......
Changed By: MikenOH
Change Date: August 13, 2011 03:22PM
Re: My trick......
Change Date: August 13, 2011 03:22PM
Re: My trick......
It's bit a while since I auto-X'd but when I did:
I added pressure in the front to prevent roll over and left some out of the rear; I also ended up going either even pressures (f/r) or even a bit more in front--this was on PS2's.
On Victoracers, lower pressures with mostly even f/r.
Given the ranges of the suggestions here, don't be afraid to experiment to see what works best. Chalking the side wall is a good idea.
As a final thought, if you continue with auto-x, consider the Techno-brace that Pedro sells. It seems to solidify the rear in sharp slower speed turns.
Finally, Here's a thread from someone covering his autocrossing experience over several events:
http://www.rahul.net/dennisp/boxster/boxster-autocross-diary.shtml
I added pressure in the front to prevent roll over and left some out of the rear; I also ended up going either even pressures (f/r) or even a bit more in front--this was on PS2's.
On Victoracers, lower pressures with mostly even f/r.
Given the ranges of the suggestions here, don't be afraid to experiment to see what works best. Chalking the side wall is a good idea.
As a final thought, if you continue with auto-x, consider the Techno-brace that Pedro sells. It seems to solidify the rear in sharp slower speed turns.
Finally, Here's a thread from someone covering his autocrossing experience over several events:
http://www.rahul.net/dennisp/boxster/boxster-autocross-diary.shtml
Original Message
Author: MikenOHDate: August 13, 2011 03:16PM
Re: My trick......
It's bit a while since I auto-X'd but when I did:
I added pressure in the front to prevent roll over and left some out of the rear; I also ended up going either even pressures (f/r) or even a bit more in front--this was on PS2's.
On Victoracers, lower pressures with mostly even f/r.
Given the ranges of the suggestions here, don't be afraid to experiment to see what works best. Chalking the side wall is a good idea.
As a final thought, if you continue with auto-x, consider the Techno-brace that Pedro sells. It seems to solidify the rear in sharp slower speed turns.
I added pressure in the front to prevent roll over and left some out of the rear; I also ended up going either even pressures (f/r) or even a bit more in front--this was on PS2's.
On Victoracers, lower pressures with mostly even f/r.
Given the ranges of the suggestions here, don't be afraid to experiment to see what works best. Chalking the side wall is a good idea.
As a final thought, if you continue with auto-x, consider the Techno-brace that Pedro sells. It seems to solidify the rear in sharp slower speed turns.