Changed By: Boxsterra Change Date: January 29, 2026 06:40AM I did this last year
If I remember correctly, I had to make sure the routing of the cables from the upper right where they split from the loom to down below was correct. And I pushed he cable ends through the bottom opening one at a time, biggest one first. But I first made sure to tape them up to make sure to avoid breaking off the fragile clips. The existing cables had to be lightly pushed to the side to get them through.
I'll see if I can find a picture.
Original Message
Author: Boxsterra Date: January 29, 2026 06:37AM I did this last year
If I remember correctly, I had to make sure the routing of the cables from the upper right where they split from the loom to down below was correct. And I pushed he cable ends through the bottom opening one at a time, biggest one first. But I first made sure to tape them up to make sure to avoid breaking off the fragile clips.