Home
>
Main Forum
>
Topic Question on installing a 3.4L motor out of a 911 in a 986 |
Question on installing a 3.4L motor out of a 911 in a 986 MikenOH - Thursday, 14 June, 2012, at 9:12:09 pm |
What I recall is the 3.4l engine (or 3.6l engine) is mounted a bit lower which provides room... MarcW - Thursday, 14 June, 2012, at 9:51:22 pm |
Re: Question on installing a 3.4L motor out of a 911 in a 986 Mark from SC - Friday, 15 June, 2012, at 6:55:36 am |
Thanks for the responses. *NM* MikenOH - Friday, 15 June, 2012, at 8:08:56 am |
Re: Question on installing a 3.4L motor out of a 911 in a 986 steve_wilwerding - Friday, 15 June, 2012, at 8:29:02 am |
Re: Question on installing a 3.4L motor out of a 911 in a 986 Jaay - Friday, 15 June, 2012, at 9:07:42 am |
Re: Question on installing a 3.4L motor out of a 911 in a 986 MikenOH - Friday, 15 June, 2012, at 9:44:40 am |
Isn't this question about the intake? Boxsterra - Friday, 15 June, 2012, at 11:57:35 am |
Yes, but my recollection is there is no need to swap the intake from the orignal engine... MarcW - Friday, 15 June, 2012, at 5:12:51 pm |
Marc is correct, the 3.4 intake will work, at least on a MY 99 emmettpeter - Friday, 15 June, 2012, at 8:25:20 pm |
"The 3.4L intake" will not work - part of it will and part of it won't Boxsterra - Saturday, 16 June, 2012, at 5:55:05 pm |
Re: "The 3.4L intake" will not work - part of it will and part of it won't scott in pa - Tuesday, 19 June, 2012, at 2:04:16 pm |
Might the engine drop have a deleterious effect on the halfshafts? (Wear, power transmission, etc.?) *NM* Laz - Tuesday, 19 June, 2012, at 2:53:29 pm |
Anything that results in the half shafts being out of parallel with the road causes extra wear... MarcW - Wednesday, 20 June, 2012, at 1:49:21 pm |
It's actually not a 1/2" drop of the engine... Pedro (Odessa, FL) - Wednesday, 20 June, 2012, at 2:50:17 pm |
Boxsterra is referring to.... Pedro (Odessa, FL) - Tuesday, 19 June, 2012, at 7:32:42 pm |
Re: Question on installing a 3.4L motor out of a 911 in a 986 Jaay - Tuesday, 19 June, 2012, at 2:46:24 pm |