I spent a few hours changing out the AOS today (thanks Pedro for the instructions you have posted online). But when I start the car it fires up and then immediately begins to backfire and then dies. I checked for codes with the Durametric but there are none that it is throwing out.
If you use a little mirror you can see if the accordion hose is on properly. Even when it looks from first appearance as if it's correct, sometimes it's kinked or not all correct in the back. The bottom flange should be flush all the way around.
Thanks to Mark W and Boxsterra for the reply. The problem was when I replace the forward cross tube the small vacuum line did not get put on securely enough to stay on. When I took the tube off I found that line was not connected. Everything with the AOS was great.
I can't speak highly enough of this community and the help they have provided to me over the past 8 years of Boxster ownership.