Home
>
Main Forum
>
Topic Re: It sounds like perhaps your throttle body/ICV are dirty/sticking |
Bad MAF Or??? Ollie - Sunday, 13 July, 2014, at 10:59:27 am |
The MAF is certainly worthy of suspicion. Shade tree mechanic trick is to disconnect the MAF... MarcW - Sunday, 13 July, 2014, at 11:21:04 am |
Re: The MAF is certainly worthy of suspicion. Shade tree mechanic trick is to disconnect the MAF... Ollie - Sunday, 13 July, 2014, at 11:36:53 am |
If you think it might be the MAF Boxsterra - Sunday, 13 July, 2014, at 12:30:12 pm |
Re: If you think it might be the MAF Ollie - Sunday, 13 July, 2014, at 12:49:18 pm |
With the MAF disconnected who knows what you'll see... MarcW - Sunday, 13 July, 2014, at 5:16:05 pm |
Re: With the MAF disconnected who knows what you'll see... Ollie - Sunday, 13 July, 2014, at 7:59:07 pm |
Re: High idle Ollie - Monday, 14 July, 2014, at 6:16:46 am |
Reads like the solenoids are not working... MarcW - Monday, 14 July, 2014, at 10:41:21 am |
Quote
Ollie
Disconnected MAF and went for ride. When IO returned no difference in anything. All reading still the same.
BUT- I found an old bad MAF and installed that- Immediately got a MAF code. However, idle still high and all reading basically the same. I think this starts ruling out the MAF as the issue.
What I find interesting is my cam shaft deviations are both ZERO. when I activate bank 1 it goes to 1 then when I stop it goes back to zero. Same for bank 2.
I see so many folks with deviations in the 5, 6 or higher range... not sure why mine are zero with 176K miles?????
Re: Reads like the solenoids are not working... Ollie - Monday, 14 July, 2014, at 8:06:50 pm |
It sounds like perhaps your throttle body/ICV are dirty/sticking Boxsterra - Sunday, 13 July, 2014, at 12:28:47 pm |
Good point. I tend to forget the earlier models do not have e-Gas... MarcW - Sunday, 13 July, 2014, at 5:25:09 pm |
Re: It sounds like perhaps your throttle body/ICV are dirty/sticking Ollie - Sunday, 13 July, 2014, at 7:53:36 pm |
Re: Bad MAF Or??? San Rensho - Tuesday, 15 July, 2014, at 12:12:50 am |
Re: Bad MAF Or??? Ollie - Friday, 18 July, 2014, at 9:46:09 pm |
There are various ways to search for a intake leak. One... MarcW - Saturday, 19 July, 2014, at 12:45:37 pm |
Start with the known weak spots for your car Boxsterra - Saturday, 19 July, 2014, at 2:04:18 pm |
Re: Bad MAF Or??? San Rensho - Sunday, 20 July, 2014, at 5:53:00 pm |
Quote
Ollie
I put a known good MAF in tonight with no change... agree with Vac leak, this has been my main thought BUT I can not find one AHHHHHHH