First and foremost, Pedro, thanks for putting this board together.
Here is my issue. I have a common issue with my Drive box getting soaked in the rain. I have cleaned it, dried it, and now, everything works except for my windows. Windows will not go up with the buttons, windows will not roll down when convertible is unlatched; but windows will do the small roll down down and roll up when opening and closing the door. A friend of mine has a boxster, and we pulled his CLU out of his car and swapped in mind to see if the windows would work again, which they did. Obviously the car won't start with his module; so i started thinking rather than spending a fortune on new keys, module, and reprogram, that i could buy a used module, and swap the programmed chip to the new board. I googled this and found 1 guy had questioned this before, got a response from someone who said he had done it, but would not give info beyond saying it is possible.
Does anyone have a circuit diagram of this board saying which pins control what on the two connectors. I have 2 options;
1. trace the pins related to the window operation, and find the problem ( i suspect it is a relay, but don't know which one)
2. figure which chip board contains the programming, and remove it and swap on a non soaked board.
Really, all i need is the schematics of this board, or a pin out diagram showing which pins are responsible for the windows.
I have searched and searched but found no info. Any help is appreciated. I know i can figure it out in due time, and will be happy to share my solution with the board.