Boxster No power to anything on fuse circuit C3 offroadjim - 7 years ago |
Re: Boxster No power to anything on fuse circuit C3 MarcW - 7 years ago |
Quote
offroadjim
Hi.
I have a 1998 Boxster which I just replaced the electrical portion of the ignition switch on. After replacing the ignition piece everything on the "C3" fuse circuit (power windows, interior lights, locks and alarm) no longer work. I checked the "C3" fuse on both sides with a test light and there is power on both sides. I also removed the fuse and put a jumper from one side to the other and still nothing to any of the accessories on that circuit. I also reinstalled the original ignition switch (issue was key removal) and still no power to those accessories on that circuit.
I've checked for anything that might have been distributed and can not find anything.
Any idea what to check next? Again it's only the accessories on that "C3" circuit
Thank you
Jim
Re: Boxster No power to anything on fuse circuit C3 MarcW - 7 years ago |
Quote
offroadjim
I pulled the seats out today and the alarm wound up being under the drivers seat and the 15 fuse in it was good. I can't seem to locate any type of diagram to show me where the line from the fuse box goes to next and how it powers all the individual accessories
Re: Boxster No power to anything on fuse circuit C3 MarcW - 7 years ago |
Quote
offroadjim
So does that mean that the power goes from the fuse box to the alarm under the seat and the. To the locks, windows, etc?
Re: Boxster No power to anything on fuse circuit C3 MarcW - 7 years ago |
Quote
offroadjim
Would there be a way to temporarily wire it so that the windows at least get power?
Quote
offroadjim
Hi
I tried switching back to the original ignition switch several times because it would seem that the last thing touched would have something to do with it but it did not work with the original one either
Last night I changed the passenger side brake light as it was out and when I went to open the door to get in the car the driver window decided it would go down all the way. Ughhh as I still can't raise or lower them. So now being that it's 30* here I need to get the window to go back up. Any ideas how I can get it to go back up now?