front passenger seat removal

Hello: I just purchased a 2005 Boxster and the previous owner left a large CD case holder under the passenger seat and from moving the seat forward and back the drive motor came disconnected from the left hand drive rail mechanism. I have been able to remove the back two torx screws from the back rail. But unable to find the two front torx screws for the front rails, I have removed the plastic cover over the front rails. The seat is stuck in the forward position. Is access to the front two torx screws from underneath the car, under the plastic cover? Any assistance will be much appreciated.

Thank you;
Gerd



Edited 1 time(s). Last edit at 08/15/2012 04:41PM by kelrachael. (view changes)

Usually that gives you good access to the space under the seat.

The front bolts are under the plastic covers, they slide forward and off to reveal the bolts.there is a small area in the middle of the plastic cover that has to be slightly raised to release the cover. If your seats are electric or heated- there is also the electrical connector under the seat. You will need to get a gegree in engineering to get that apart without damaging it, lol

Good luck!