Main Forum

Discussion of Boxsters and other Porsches

Announcements		Last Post
	Instructions for posting photos (NEW & IMPROVED)	10/22/2011 09:51AM
	Our Rules	11/11/2010 04:00PM

Buying through this link, gets PB a donation.	Expect the best, and accept no substitute.

Page 192 of 215 Pages:

187 188 189 190 191192193 194 195 196

Forum List New Topic RSS

Post	Views
Are rebuild kits available for the Porsche/brembo calipers? grant - Friday, 6 May, 2011, at 12:22:23 pm	6,923
Re: Are rebuild kits available for the Porsche/brembo calipers? old timer - Friday, 6 May, 2011, at 2:35:30 pm	3,270
thanks. I'll go look. grant - Friday, 6 May, 2011, at 3:32:50 pm	2,863
I rebuilt a set of Boxster calipers... Cris - Friday, 6 May, 2011, at 7:22:39 pm	4,877
that compressor part is a challenege for me... grant - Saturday, 7 May, 2011, at 9:10:55 am	2,738
you can remove pads then slowly push out the pistons Cris - Saturday, 7 May, 2011, at 11:04:38 pm	2,971
thanks *NM* grant - Sunday, 8 May, 2011, at 12:16:28 pm	2,777
Re: I rebuilt a set of Boxster calipers... Blackboxst - Monday, 9 May, 2011, at 10:00:52 am	3,171
Do not re-use the seals Red_Lightnin! - Monday, 9 May, 2011, at 5:24:48 pm	3,315
Agreed... Pedro (Odessa, FL) - Monday, 9 May, 2011, at 5:54:47 pm	2,823
I'm not sure they need top be rebuilt, but you may have followed a recent thread... my pistons *were grant - Monday, 9 May, 2011, at 9:25:04 pm	2,753
OK, that's a good reason! Just don't re-use the seals. *NM* Red_Lightnin! - Tuesday, 10 May, 2011, at 3:46:30 pm	3,102
I have no idea if its a good reason, but I got blind sided and now i'm more cautious. grant - Tuesday, 10 May, 2011, at 7:21:37 pm	2,840
I'm baaaaacck! sasilverbullet - Tuesday, 10 May, 2011, at 4:38:16 pm	1,582
Welcome back... Pedro (Odessa, FL) - Tuesday, 10 May, 2011, at 4:40:25 pm	924
Re: Welcome back! +1 Guenter in Ontario - Tuesday, 10 May, 2011, at 5:58:01 pm	933
The good thing is that... Pedro (Odessa, FL) - Tuesday, 10 May, 2011, at 6:39:59 pm	934
...and they don't cost much scratch *NM* Gary in SoFL - Tuesday, 10 May, 2011, at 6:50:23 pm	866
Automatic locking Brasco - Monday, 9 May, 2011, at 7:21:23 pm	1,487
There are ... Pedro (Odessa, FL) - Monday, 9 May, 2011, at 10:11:40 pm	870
Re: Automatic locking db997S - Tuesday, 10 May, 2011, at 8:16:24 am	869
Re: Automatic locking Brasco - Tuesday, 10 May, 2011, at 4:25:00 pm	801
Great timing. I finally get some time off and on I-80 across NV get a phone call that... MarcW - Saturday, 7 May, 2011, at 10:36:32 am	1,874
$900? I have one word: raxles.com *NM* grant - Saturday, 7 May, 2011, at 11:09:37 am	1,272
Speaking of crossing NV which we did this march in the Bullitt... dennisafrompa - Monday, 9 May, 2011, at 7:39:37 am	1,183
It has been a long time since I've been this way, over I-80. At least 10 years... Is that right?... MarcW - Monday, 9 May, 2011, at 9:27:03 am	1,247
I got stopped in WY.... dennisafrompa - Monday, 9 May, 2011, at 5:00:08 pm	1,213
Looks like Pedro is branching out - the Techno Jeep Lawdevil & CURVN8R - Friday, 6 May, 2011, at 1:55:04 pm	1,386
I had similar sounds from my car and Pedro could not help me *NM* Harvey in FL - Friday, 6 May, 2011, at 2:37:29 pm	876
Obviously just a cheap knockoff Guenter in Ontario - Monday, 9 May, 2011, at 8:35:45 am	851
Remember your first ride? Tom (Powell, OH) - Sunday, 8 May, 2011, at 10:29:57 am	1,650
Opening up the engine cover - what might I do? Bobtesa - Friday, 6 May, 2011, at 11:12:12 am	1,979
Not much. grant - Saturday, 7 May, 2011, at 9:14:51 am	1,287
How often do you clean the MAF? and, Bobtesa - Saturday, 7 May, 2011, at 11:53:32 am	1,759
In theory, never. In practice,, dunno really. grant - Saturday, 7 May, 2011, at 12:57:51 pm	1,231
Re: How often do you clean the MAF? and, Blackboxst - Saturday, 7 May, 2011, at 1:32:34 pm	1,248
Admittedly, first rule is do no harm! *NM* grant - Saturday, 7 May, 2011, at 4:21:21 pm	1,242
Re: How often do you clean the MAF? and, Tnert - Saturday, 7 May, 2011, at 5:29:39 pm	1,183
Because, as i wrote, they are constantly getting slightly fouled by various contaminants. grant - Saturday, 7 May, 2011, at 11:02:09 pm	1,437
IIRC none of our cars use the hot-wire MAF. All use the hot film MAF which is much less.... MarcW - Sunday, 8 May, 2011, at 9:27:23 am	1,382
I'm in Metro NY ( New Jersey suburbs). My only solid experience was with my 2000 Audi.. grant - Sunday, 8 May, 2011, at 9:55:36 am	1,162
Re: How often do you clean the MAF? and, Ricey - Saturday, 7 May, 2011, at 6:00:42 pm	1,174
It has been a long time since I removed my car's TB. It was not hard, that I know, but I don't... MarcW - Sunday, 8 May, 2011, at 9:33:43 am	1,396
You could check the air filter Tom (Powell, OH) - Sunday, 8 May, 2011, at 10:26:08 am	1,267
Also this (long) weekend EdSac - Tuesday, 3 May, 2011, at 1:13:19 am	1,948
Re: Also this (long) weekend Guenter in Ontario - Tuesday, 3 May, 2011, at 7:50:39 am	895
Re: Also this (long) weekend BoxsterBob - San Carlos - Tuesday, 3 May, 2011, at 4:14:17 pm	900
Do you know how hard it is Guenter in Ontario - Tuesday, 3 May, 2011, at 5:23:15 pm	890
Re: Also this (long) weekend Charlie (Sacramento CA) - Tuesday, 3 May, 2011, at 9:59:51 pm	833
Charlie EdSac - Thursday, 5 May, 2011, at 12:05:34 pm	969
Re: Charlie Charlie (Sacramento CA) - Saturday, 7 May, 2011, at 10:27:05 pm	996
Hi Charlie... Pedro (Odessa, FL) - Thursday, 5 May, 2011, at 12:21:05 pm	933
Re: Hi Charlie... Charlie (Sacramento CA) - Saturday, 7 May, 2011, at 10:27:40 pm	1,002
further headlight discussion. UV sealer Petee_C - Thursday, 5 May, 2011, at 8:36:27 am	3,305
Those sealers... Pedro (Odessa, FL) - Thursday, 5 May, 2011, at 9:36:45 am	1,149
Re: further headlight discussion. UV sealer Capt Ron - Thursday, 5 May, 2011, at 7:03:56 pm	2,044
I have tried buffing the yellow haze only to have it come back. A friend told me about a company Naples986 - Friday, 6 May, 2011, at 7:23:42 pm	1,083
Re: further headlight discussion. UV sealer tamarsha - Friday, 6 May, 2011, at 11:09:58 pm	1,970
Some questions about a term that's been discussed before Laz - Saturday, 7 May, 2011, at 9:27:29 am	1,099
Re: Some questions about a term that's been discussed before tamarsha - Saturday, 7 May, 2011, at 8:17:54 pm	1,090
The cooling woes continue Yippee38 - Friday, 6 May, 2011, at 3:06:40 pm	2,164
25 psi too much pressure to use to pressure test system. IIRC the test pressure is 1.3 bar. MarcW - Friday, 6 May, 2011, at 11:33:09 pm	1,940
Re: 25 psi too much pressure to use to pressure test system. IIRC the test pressure is 1.3 bar. Yippee38 - Friday, 6 May, 2011, at 11:50:52 pm	1,371
Re: 25 psi too much pressure to use to pressure test system. IIRC the test pressure is 1.3 bar. joris - Saturday, 7 May, 2011, at 3:40:07 am	1,373
Uh, yes and no. Joris covers this in his post. I will add that cooling systems are funny... MarcW - Saturday, 7 May, 2011, at 10:02:21 am	1,270
I'm sure he meant 25 inches Hg, not 25 PSI. The gauge shows vacuum from 0-30 inches Hg *NM* Pedro (Odessa, FL) - Saturday, 7 May, 2011, at 9:33:39 am	1,517
Ah, yes in reading through the post again I agree. That amount of vacuum should not cause any.... MarcW - Saturday, 7 May, 2011, at 9:44:01 am	1,286
Re: I did mean 25 inches Hg, NM *NM* Yippee38 - Saturday, 7 May, 2011, at 11:48:54 am	1,215
Tip Service?... marbleheader - Thursday, 5 May, 2011, at 5:07:00 pm	1,993
That's a tough call. I'd hate to say "change the fluid" and then read a later post from you... MarcW - Thursday, 5 May, 2011, at 6:04:26 pm	1,059
Re: That's a tough call. I'd hate to say "change the fluid" and then read a later post from you... marbleheader - Thursday, 5 May, 2011, at 6:53:13 pm	1,033
Well, if you are happy with your indy and trust him then do as he advises. I'm not comfortable.... MarcW - Friday, 6 May, 2011, at 11:23:36 pm	1,094
Re: Well, if you are happy with your indy and trust him then do as he advises. I'm not comfortable.... marbleheader - Saturday, 7 May, 2011, at 5:04:19 am	1,097
Sorry. My comprehension is shot. I'm on a break, a much delayed break before heading back... MarcW - Saturday, 7 May, 2011, at 10:15:32 am	1,108
But a TIP fluid "change" really isn't mikefocke, '01S Sanford, NC - Friday, 6 May, 2011, at 8:04:16 am	1,064
Re: Tip Service?... Dale_K - Friday, 6 May, 2011, at 8:02:08 am	1,027
Service: absolutely. Flush no. Read more. grant - Friday, 6 May, 2011, at 12:20:15 pm	1,095
Re: Tip Service?... patrick - Friday, 6 May, 2011, at 3:34:59 pm	1,129
Brake Flush with Motive. - 01 Boxster S - screen on Master Cylinder Reservoir Petee_C - Monday, 2 May, 2011, at 1:45:49 pm	2,991
The reservior screen comes out on my 02 Boxster. You don't have to remove it but if you do... MarcW - Monday, 2 May, 2011, at 2:21:33 pm	1,081
on my 04 only with great difficulty and much force - so i dont grant - Monday, 2 May, 2011, at 3:16:55 pm	1,049
Should add that even though the BF in the reservior is not dirty it should still be fully flushed... MarcW - Monday, 2 May, 2011, at 6:11:50 pm	1,167
Not just "should" - "must" grant - Wednesday, 4 May, 2011, at 10:26:07 am	1,040
It's a pain but it does come out... Rob in CO - Monday, 2 May, 2011, at 11:22:35 pm	1,059
Just... Pedro (Odessa, FL) - Tuesday, 3 May, 2011, at 9:26:28 am	1,106
Re: Just... Yippee38 - Friday, 6 May, 2011, at 3:09:11 pm	1,216
I really dislike that approach - here's why grant - Friday, 6 May, 2011, at 3:32:26 pm	1,074
Re: I really dislike that approach - here's why Petee_C - Friday, 6 May, 2011, at 9:55:11 pm	1,745
to better ideas grant - Saturday, 7 May, 2011, at 8:59:06 am	1,043
Here is how to save your Porsche when the flood comes...worked for a 964, should work for a Boxster RainyDayGarage - Friday, 6 May, 2011, at 4:05:04 pm	1,741
Car guys, you gotta love them. *NM* Naples986 - Friday, 6 May, 2011, at 7:27:13 pm	964
Coolant tank R&R....... por911(bc) - Monday, 2 May, 2011, at 5:43:42 pm	1,664
Why do you think it will not last? .... Pedro (Odessa, FL) - Monday, 2 May, 2011, at 6:49:32 pm	903
a response .... por911(bc) - Monday, 2 May, 2011, at 7:28:05 pm	896
They just fail. I think it mainly the luck of the draw. The few I've seen failed had failed... MarcW - Monday, 2 May, 2011, at 9:46:18 pm	862
I would imagine that they get more brittle when they reach, say 10 deg (F). So do I. *NM* grant - Monday, 2 May, 2011, at 7:48:11 pm	892
Re: Coolant tank R&R....... u2986 - Thursday, 5 May, 2011, at 8:56:32 pm	1,008
Speedometer digital display behaving badly... patrick - Thursday, 5 May, 2011, at 3:47:05 pm	3,245
The digital gauges... Pedro (Odessa, FL) - Thursday, 5 May, 2011, at 4:43:27 pm	900
Re: The digital gauges... patrick - Thursday, 5 May, 2011, at 8:04:12 pm	965
Speedometer Error p-wagen - Wednesday, 4 May, 2011, at 6:39:28 pm	1,628
Re: Speedometer Error frogster - Wednesday, 4 May, 2011, at 7:07:34 pm	925
What frogster said. My 02's speedo is 4-5mph opimistic at 70mph (and at lower and higher.... MarcW - Wednesday, 4 May, 2011, at 9:18:38 pm	915
Re: Speedometer Error MikenOH - Wednesday, 4 May, 2011, at 9:54:10 pm	867
Re: Speedometer Error Guenter in Ontario - Wednesday, 4 May, 2011, at 11:27:18 pm	865
Re: Speedometer Error joris - Thursday, 5 May, 2011, at 2:41:33 am	831
Re: Speedometer Error BoxsterBob - San Carlos - Thursday, 5 May, 2011, at 1:02:19 pm	821
Known issue especially with earlier Boxsters... patrick - Thursday, 5 May, 2011, at 3:39:24 pm	954
Re: Speedometer Error p-wagen - Thursday, 5 May, 2011, at 5:37:30 pm	968
Look at the size of that air filter!... MarcW - Tuesday, 3 May, 2011, at 4:49:51 pm	1,774
Nice. I really like the Guenter in Ontario - Tuesday, 3 May, 2011, at 5:14:48 pm	875
Re: Look at the size of that air filter!... jwdbox - Tuesday, 3 May, 2011, at 7:50:46 pm	862
Well, I'm not the world's best photographer (closer to the other end of the spectrum) but... MarcW - Tuesday, 3 May, 2011, at 8:42:57 pm	941
Re: Look at the size of that air filter!... MikenOH - Tuesday, 3 May, 2011, at 9:35:58 pm	811
The primary case for a revised intake IMO is the sound *NM* Boxsterra - Thursday, 5 May, 2011, at 11:36:38 am	904
Call from dealer service. 2 CV boots have failed and others are of course very very close to .. MarcW - Monday, 25 April, 2011, at 8:44:05 pm	2,152
Re: Call from dealer service. 2 CV boots have failed and others are of course very very close to .. gedwin - Tuesday, 26 April, 2011, at 9:54:25 am	1,339
CV boots have failed JM-Stamford,CT - Tuesday, 26 April, 2011, at 9:57:04 am	1,507
Re: CV boots have failed Capt Ron - Tuesday, 26 April, 2011, at 12:47:26 pm	1,360
Re: Call from dealer service. 2 CV boots have failed and others are of course very very close to .. Petee_C - Tuesday, 26 April, 2011, at 1:26:55 pm	1,360
Update: Stopped in and took a look at the Boxster on the lift... MarcW - Tuesday, 26 April, 2011, at 1:56:38 pm	1,362
Re: Update: Stopped in and took a look at the Boxster on the lift... mikefocke, '01S Sanford, NC - Tuesday, 26 April, 2011, at 4:26:57 pm	1,412
Lots of used ones on the MINI dealer lot and I found 64 2011 S models listed for sale. Quite MarcW - Tuesday, 26 April, 2011, at 6:07:42 pm	1,350
Always a tough call mikefocke, '01S Sanford, NC - Tuesday, 26 April, 2011, at 7:12:19 pm	1,238
Re: Lots of used ones on the MINI dealer lot and I found 64 2011 S models listed for sale. Quite db997S - Wednesday, 27 April, 2011, at 11:25:37 am	1,532
There were some issues with the early cars. They had the Chrysler engine (made in South... MarcW - Wednesday, 27 April, 2011, at 4:19:39 pm	1,349
What year? 250,000 miles is a lot - that's 400,000km, in approximately 9-11yrs? Petee_C - Thursday, 28 April, 2011, at 11:45:09 am	2,162
Free Advice and Worth Every Penny paulwdenton - Thursday, 28 April, 2011, at 8:58:17 am	1,329
Re: Free Advice and Worth Every Penny lacleven - Thursday, 28 April, 2011, at 11:26:16 am	1,280
Cheaper to keep her dghii - Thursday, 28 April, 2011, at 1:13:36 pm	1,307
Not as crazy as pouring money into a new car, or even another used Boxster... MarcW - Thursday, 28 April, 2011, at 1:42:21 pm	1,481
exactly. On a cost basis, old and well cared for is always cheaper. grant - Thursday, 28 April, 2011, at 2:45:31 pm	1,345
Re: Not as crazy as pouring money into a new car, or even another used Boxster... paulwdenton - Friday, 29 April, 2011, at 10:24:42 am	1,442
The gas cost would more than your calculation. The Turbo would be my sole means of getting around... MarcW - Friday, 29 April, 2011, at 5:58:39 pm	1,432
My take: fix it. $2k is $111/month /18 months. Nearly every car, once it passes, oh, 75k... grant - Thursday, 28 April, 2011, at 12:35:32 pm	1,418
Why not find a good independant? I did. Bruce In Philly (2000 S Boxster, now '09 C2S) - Thursday, 28 April, 2011, at 4:34:49 pm	1,335
the costs i quoted are nto for dealer service. They are for indie service. Or in my case, grant - Friday, 29 April, 2011, at 2:43:31 pm	1,413
Re: Why not find a good independant? I did. AndyInNYC - Thursday, 5 May, 2011, at 9:03:25 am	1,404
A great source of experienced, dedicated indoes is PCA grant - Thursday, 5 May, 2011, at 10:45:23 am	1,406
Hey Marc W Roger987 - Tuesday, 3 May, 2011, at 4:50:10 pm	1,749
Re: Hey Marc W - great minds Guenter in Ontario - Tuesday, 3 May, 2011, at 5:10:58 pm	1,028
You guys. The salesman at the dealer pushes the Cayman R at me everytime he sees me. MarcW - Tuesday, 3 May, 2011, at 6:09:48 pm	1,073
Does the lease have a Force Majeure clause? *NM* Laz - Tuesday, 3 May, 2011, at 9:29:02 pm	1,057
It's the time to buy a place, Marc. Prices have never been better. *NM* JiminAZ - Wednesday, 4 May, 2011, at 7:02:11 pm	1,159
Until tomorrow when they may be in your area. mikefocke, '01S Sanford, NC - Wednesday, 4 May, 2011, at 8:41:23 pm	1,047
No. I would not own this place as a gift. While the unit is very comfortable and I like the ... MarcW - Wednesday, 4 May, 2011, at 9:11:26 pm	1,004
Checked on 02 Boxster today. Tech reported a bit of a problem in removing the half-shafts.. MarcW - Tuesday, 3 May, 2011, at 2:11:04 pm	1,618
Why were half-shafts removed to service the RMS or IMS? There is zero need. grant - Tuesday, 3 May, 2011, at 2:16:46 pm	891
The transmission has to come out to get to the RMS/IMS area and to drop the transmission... MarcW - Tuesday, 3 May, 2011, at 4:29:13 pm	840
Doh! *NM* grant - Wednesday, 4 May, 2011, at 3:59:08 pm	901
Using and Indy or a Dealer - who do you use and why? Bruce In Philly (2000 S Boxster, now '09 C2S) - Saturday, 30 April, 2011, at 10:44:11 am	1,913
I use me and an indie. grant - Saturday, 30 April, 2011, at 1:48:04 pm	1,175
Re: I use me and an indie. db997S - Monday, 2 May, 2011, at 8:35:28 am	1,232
a response.... por911(bc) - Saturday, 30 April, 2011, at 2:28:46 pm	1,192
I use an indie and some me... Dave In MD - Saturday, 30 April, 2011, at 4:09:58 pm	1,155
Re: Using and Indy or a Dealer - who do you use and why? Bobtesa - Saturday, 30 April, 2011, at 7:14:13 pm	1,106
Re: Using and Indy or a Dealer - who do you use and why? old timer - Saturday, 30 April, 2011, at 7:33:00 pm	1,098
I like going to this little place called ... 9eighty6 - Saturday, 30 April, 2011, at 8:32:17 pm	1,200
Re: Using and Indy or a Dealer - who do you use and why? Dave In MD - Saturday, 30 April, 2011, at 9:56:33 pm	1,178
The last time ... Pedro (Odessa, FL) - Monday, 2 May, 2011, at 9:29:54 am	1,220
Does he make house calls? *NM* MarcW - Tuesday, 3 May, 2011, at 4:30:35 pm	1,330
I'd settle for Province calls. *NM* Guenter in Ontario - Tuesday, 3 May, 2011, at 9:04:37 pm	1,343
I'd like to settle in Provence myself! *NM* Laz - Tuesday, 3 May, 2011, at 9:30:07 pm	1,080
hmmmm. I think we're thinking about 4000 miles apart. *NM* Guenter in Ontario - Tuesday, 3 May, 2011, at 11:12:30 pm	1,122
Loose exhaust heat shields rattling: Re-attach ideas? Tom (Powell, OH) - Sunday, 1 May, 2011, at 6:32:49 pm	3,012
There is ... Pedro (Odessa, FL) - Sunday, 1 May, 2011, at 6:52:17 pm	1,021
Try Home Depot Boxsterra - Monday, 2 May, 2011, at 7:27:27 am	1,264
If you use simple screws ... Pedro (Odessa, FL) - Monday, 2 May, 2011, at 9:18:12 am	1,049
Re: If you use simple screws ... frogster - Monday, 2 May, 2011, at 2:15:19 pm	996
Not for me Boxsterra - Tuesday, 3 May, 2011, at 7:05:07 pm	999
a comment.... por911(bc) - Monday, 2 May, 2011, at 2:24:49 pm	978
On another car I used a big hose clamp. Laz - Tuesday, 3 May, 2011, at 9:37:42 pm	943
Great weekend around NOTL Guenter in Ontario - Monday, 2 May, 2011, at 4:31:24 pm	1,682
Re: Great weekend around NOTL jwdbox - Monday, 2 May, 2011, at 9:20:15 pm	925
Re: Great weekend around NOTL Guenter in Ontario - Monday, 2 May, 2011, at 11:28:25 pm	811
Re: Great weekend around NOTL Naples986 - Tuesday, 3 May, 2011, at 7:16:20 pm	807
OK, you asked for it. Guenter in Ontario - Tuesday, 3 May, 2011, at 7:46:34 pm	919
Do you need to service spark plug tubes on an '03? tamarsha - Tuesday, 3 May, 2011, at 1:23:57 pm	1,870
The tubes and in the older cars the o-rings are not scheduled service items. IIRC the rule is ... MarcW - Tuesday, 3 May, 2011, at 2:12:26 pm	925
Re: Do you need to service spark plug tubes on an '03? dghii - Tuesday, 3 May, 2011, at 2:43:44 pm	889
Re: Do you need to service spark plug tubes on an '03? tamarsha - Tuesday, 3 May, 2011, at 3:01:53 pm	982
As I say on ... Pedro (Odessa, FL) - Tuesday, 3 May, 2011, at 3:31:21 pm	996
Re: Do you need to service spark plug tubes on an '03? BoxsterBob - San Carlos - Tuesday, 3 May, 2011, at 3:47:27 pm	826
Porsche, PCH, Whales, Pelicans, Dolphins and a guy from New York City.... r9i8c7k - Monday, 2 May, 2011, at 9:58:18 pm	1,961
Re: Porsche, PCH, Whales, Pelicans, Dolphins and a guy from New York City.... goldened - Monday, 2 May, 2011, at 10:21:14 pm	1,018
The pelicans remind me of da Vinci's bird studies and Eadweard Muybridge's motion photography. *NM* Laz - Monday, 2 May, 2011, at 10:41:37 pm	1,778
Anecdotal positive experience with Castrol SynTech 5/40.... Tony in Whittier - Friday, 22 April, 2011, at 5:18:35 pm	3,296
It is an approved oil, so the oil doesn't have much ZDDP in it. Too much is bad. Why? Well... MarcW - Friday, 22 April, 2011, at 5:52:29 pm	2,002
What oil had you been using, Marc? *NM* MikenOH - Saturday, 23 April, 2011, at 12:02:32 pm	1,622
Sorry, missed your question. This change before this one I used Mobil 1 5w-40 oil in both cars... MarcW - Monday, 25 April, 2011, at 1:18:19 pm	1,832
I don't completely agree with MarcW ... Pedro (Odessa, FL) - Saturday, 23 April, 2011, at 1:12:19 pm	1,831
Re: I don't completely agree with MarcW ... patrick - Saturday, 23 April, 2011, at 4:39:56 pm	1,565
Such a rock and hard place decison! Pedro vs Marc :-) But on this one... grant - Saturday, 23 April, 2011, at 6:36:51 pm	1,510
Ok. ZDDP is being reduced to prolong converter life. But are we to believe then that Porsche is... MarcW - Sunday, 24 April, 2011, at 4:00:13 pm	1,783
Porsche is not making the trade off. The API and ACEA are, under heavy government pressure. grant - Sunday, 24 April, 2011, at 4:21:21 pm	1,601
But not all oils that have the API and ACEA specs are approved. There are alot of oils that ... MarcW - Sunday, 24 April, 2011, at 5:35:33 pm	1,617
True. But the point is the opposite of that. No non API or ACEA oil is approved. grant - Sunday, 24 April, 2011, at 8:03:04 pm	1,545
Re: It is an approved oil, so the oil doesn't have much ZDDP in it. Too much is bad. Why? Well... old timer - Monday, 25 April, 2011, at 8:08:56 am	1,934
Well, Bruce Anderson in May's issue addressed this and recommended IIRC a Group V oil... MarcW - Monday, 25 April, 2011, at 1:14:20 pm	1,639
Re: Well, Bruce Anderson in May's issue addressed this and recommended IIRC a Group V oil... old timer - Monday, 25 April, 2011, at 3:56:53 pm	1,835
The Motul MSDSs do not list ZDDP as an ingredient in the 2 approved Motul oils... MarcW - Monday, 25 April, 2011, at 8:27:56 pm	8,815
Re: The Motul MSDSs do not list ZDDP as an ingredient in the 2 approved Motul oils... old timer - Monday, 25 April, 2011, at 9:01:05 pm	2,884
Unpronounceable? grant - Monday, 25 April, 2011, at 9:08:04 pm	1,655
I know that Zinc blah blah blah is the long name for ZDDP. But I checked 3 Motul... MarcW - Monday, 25 April, 2011, at 10:48:57 pm	1,610
Re: I know that Zinc blah blah blah is the long name for ZDDP. But I checked 3 Motul... old timer - Tuesday, 26 April, 2011, at 6:52:08 am	1,611
Not sure the new oil is not the best or better. There are some who believe the presence of the .... MarcW - Wednesday, 27 April, 2011, at 11:55:12 pm	1,500
no you won't *NM* old timer - Thursday, 28 April, 2011, at 6:49:38 am	1,598
Whoa. I noted not one person responded above when i pointed out the difference between hydrodynamic grant - Thursday, 28 April, 2011, at 9:51:44 am	1,862
The idea is to use an oil that doesn't need the additives to deal with boundary... MarcW - Thursday, 28 April, 2011, at 2:16:23 pm	1,546
What i believe and don't, and why grant - Thursday, 28 April, 2011, at 2:44:18 pm	1,577
Now that I've patiently read through all the previous oil debate ... Pedro (Odessa, FL) - Thursday, 28 April, 2011, at 4:10:19 pm	1,546
you would have done that anyway *NM* old timer - Thursday, 28 April, 2011, at 4:16:29 pm	1,464
*NM* Pedro (Odessa, FL) - Thursday, 28 April, 2011, at 5:23:58 pm	1,550
Re: Anecdotal positive experience with Castrol SynTech 5/40.... IFlyLow - Monday, 25 April, 2011, at 5:03:52 am	1,681
i did that once, sorta. grant - Monday, 25 April, 2011, at 1:59:37 pm	1,635
a comment.... por911(bc) - Thursday, 28 April, 2011, at 6:05:37 pm	1,324
Just joined you Tom (Powell, OH) - Sunday, 1 May, 2011, at 6:53:24 pm	1,642
That the engine stopped burning oil is a bit scary cause my understanding is the RX7 engine... MarcW - Monday, 2 May, 2011, at 9:48:50 pm	1,862
carrera S wheels cweldon978 - Saturday, 30 April, 2011, at 10:38:11 am	2,010
Re: carrera S wheels ff42racer - Monday, 2 May, 2011, at 2:04:22 pm	1,239
Electronics question NBC Ed B - Saturday, 23 April, 2011, at 4:06:10 pm	1,568
what kind of damage? frogster - Monday, 25 April, 2011, at 4:57:22 pm	926
Re: what kind of damage? Ed B - Wednesday, 27 April, 2011, at 9:06:33 am	935
a response.... por911(bc) - Wednesday, 27 April, 2011, at 12:32:25 pm	937
Re: a response.... Ed B - Saturday, 30 April, 2011, at 6:33:00 pm	884
Wow. An "UR" S4/S6. grant - Sunday, 1 May, 2011, at 9:14:04 pm	1,028
Re: Wow. An "UR" S4/S6. Ed B - Monday, 2 May, 2011, at 8:39:44 am	1,013
New 991 testing Guenter in Ontario - Friday, 29 April, 2011, at 3:25:52 pm	1,800
Re: New 991 testing Wayne K - Friday, 29 April, 2011, at 6:20:19 pm	988
Re: New 991 testing *NM* Wayne K - Friday, 29 April, 2011, at 6:22:04 pm	1,004
Re: New 991 testing db997S - Monday, 2 May, 2011, at 8:28:49 am	834
Blinking Oil Indicator IFlyLow - Friday, 22 April, 2011, at 12:11:21 am	2,371
Re: Blinking Oil Indicator Pedro (Odessa, FL) - Friday, 22 April, 2011, at 9:48:15 am	3,349
So, based on that, and the evidence from his dip-stick, we can conclude... grant - Friday, 22 April, 2011, at 12:22:09 pm	1,478
Re: Blinking Oil Indicator IFlyLow - Saturday, 23 April, 2011, at 3:09:28 am	5,547
Wes the car level? Boxsterra - Saturday, 23 April, 2011, at 8:00:20 pm	1,447
Re: Wes the car level? IFlyLow - Sunday, 24 April, 2011, at 3:52:52 pm	1,625
IIRC the oil level sensor is at the top of the engine. No need to mess with it... MarcW - Sunday, 24 April, 2011, at 4:15:27 pm	1,566
Re: IIRC the oil level sensor is at the top of the engine. No need to mess with it... IFlyLow - Monday, 25 April, 2011, at 1:00:35 am	2,187
Makes sense to me & I love the new oil level checking setup and do not miss the dipstick. *NM* MarcW - Monday, 25 April, 2011, at 5:54:04 pm	1,593
Re: Makes sense to me & I love the new oil level checking setup and do not miss the dipstick. Bobtesa - Tuesday, 26 April, 2011, at 9:37:43 pm	1,357
Isn't there one bar over full on the dash readout? (I'm away from the Boxster.) Laz - Wednesday, 27 April, 2011, at 8:18:03 am	1,490
Re: Isn't there one bar over full on the dash readout? Yes. The gauge should look like Guenter in Ontario - Wednesday, 27 April, 2011, at 9:09:01 am	1,510
Re: Isn't there one bar over full on the dash readout? (I'm away from the Boxster.) Bobtesa - Wednesday, 27 April, 2011, at 10:34:44 am	1,517
Re: Isn't there one bar over full on the dash readout? (I'm away from the Boxster.) Guenter in Ontario - Wednesday, 27 April, 2011, at 12:04:26 pm	1,366
The bar too high is maybe .1 litres and if you overfill mikefocke, '01S Sanford, NC - Wednesday, 27 April, 2011, at 2:14:59 pm	1,442
Only if you believe sensors don't fail mikefocke, '01S Sanford, NC - Wednesday, 27 April, 2011, at 8:05:33 am	1,371
I too like the automatic check. It keeps us all on top of oil level. That said i miss the grant - Wednesday, 27 April, 2011, at 10:29:49 am	1,380
Do you miss a mechanical driven tach? Speedo with a cable? What about mechanical... MarcW - Friday, 29 April, 2011, at 6:14:04 pm	1,504
I believe it uses a Hall Effect Sensor. *NM* Pedro (Odessa, FL) - Friday, 29 April, 2011, at 7:18:22 pm	1,563
What relative magnetic motion is it detecting? *NM* grant - Friday, 29 April, 2011, at 8:10:55 pm	1,561
A small floating magnet inside a plastic tube. *NM* Pedro (Odessa, FL) - Friday, 29 April, 2011, at 10:08:04 pm	1,509
ok, you guys get this straight, ok :-) grant - Saturday, 30 April, 2011, at 9:33:11 am	1,232
I don't have... Pedro (Odessa, FL) - Saturday, 30 April, 2011, at 7:35:07 pm	1,528
The float would move. *NM* grant - Sunday, 1 May, 2011, at 8:52:40 am	1,426
technically... Pedro (Odessa, FL) - Sunday, 1 May, 2011, at 6:55:41 pm	1,569
I really think those are very different grant - Friday, 29 April, 2011, at 8:10:32 pm	1,507
Electrical conductivity of oil/oil as dielectric; a piezoelectric sensor; an optical sensor? Laz - Saturday, 30 April, 2011, at 8:40:15 pm	1,589

Forum List New Topic RSS

Page 192 of 215 Pages:

187 188 189 190 191192193 194 195 196

Main Forum

Are rebuild kits available for the Porsche/brembo calipers? grant - Friday, 6 May, 2011, at 12:22:23 pm

Re: Are rebuild kits available for the Porsche/brembo calipers? old timer - Friday, 6 May, 2011, at 2:35:30 pm

thanks. I'll go look. grant - Friday, 6 May, 2011, at 3:32:50 pm

I rebuilt a set of Boxster calipers... Cris - Friday, 6 May, 2011, at 7:22:39 pm

that compressor part is a challenege for me... grant - Saturday, 7 May, 2011, at 9:10:55 am

you can remove pads then slowly push out the pistons Cris - Saturday, 7 May, 2011, at 11:04:38 pm

thanks *NM* grant - Sunday, 8 May, 2011, at 12:16:28 pm

Re: I rebuilt a set of Boxster calipers... Blackboxst - Monday, 9 May, 2011, at 10:00:52 am

Do not re-use the seals Red_Lightnin! - Monday, 9 May, 2011, at 5:24:48 pm

Agreed... Pedro (Odessa, FL) - Monday, 9 May, 2011, at 5:54:47 pm

I'm not sure they need top be rebuilt, but you may have followed a recent thread... my pistons *were grant - Monday, 9 May, 2011, at 9:25:04 pm

OK, that's a good reason! Just don't re-use the seals. *NM* Red_Lightnin! - Tuesday, 10 May, 2011, at 3:46:30 pm

I have no idea if its a good reason, but I got blind sided and now i'm more cautious. grant - Tuesday, 10 May, 2011, at 7:21:37 pm

I'm baaaaacck! sasilverbullet - Tuesday, 10 May, 2011, at 4:38:16 pm

Welcome back... Pedro (Odessa, FL) - Tuesday, 10 May, 2011, at 4:40:25 pm

Re: Welcome back! +1 Guenter in Ontario - Tuesday, 10 May, 2011, at 5:58:01 pm

The good thing is that... Pedro (Odessa, FL) - Tuesday, 10 May, 2011, at 6:39:59 pm

...and they don't cost much scratch *NM* Gary in SoFL - Tuesday, 10 May, 2011, at 6:50:23 pm

Automatic locking Brasco - Monday, 9 May, 2011, at 7:21:23 pm

There are ... Pedro (Odessa, FL) - Monday, 9 May, 2011, at 10:11:40 pm

Re: Automatic locking db997S - Tuesday, 10 May, 2011, at 8:16:24 am

Re: Automatic locking Brasco - Tuesday, 10 May, 2011, at 4:25:00 pm

Great timing. I finally get some time off and on I-80 across NV get a phone call that... MarcW - Saturday, 7 May, 2011, at 10:36:32 am

$900? I have one word: raxles.com *NM* grant - Saturday, 7 May, 2011, at 11:09:37 am

Speaking of crossing NV which we did this march in the Bullitt... dennisafrompa - Monday, 9 May, 2011, at 7:39:37 am

It has been a long time since I've been this way, over I-80. At least 10 years... Is that right?... MarcW - Monday, 9 May, 2011, at 9:27:03 am

I got stopped in WY.... dennisafrompa - Monday, 9 May, 2011, at 5:00:08 pm

Looks like Pedro is branching out - the Techno Jeep Lawdevil & CURVN8R - Friday, 6 May, 2011, at 1:55:04 pm

I had similar sounds from my car and Pedro could not help me *NM* Harvey in FL - Friday, 6 May, 2011, at 2:37:29 pm

Obviously just a cheap knockoff Guenter in Ontario - Monday, 9 May, 2011, at 8:35:45 am

Remember your first ride? Tom (Powell, OH) - Sunday, 8 May, 2011, at 10:29:57 am

Opening up the engine cover - what might I do? Bobtesa - Friday, 6 May, 2011, at 11:12:12 am

Not much. grant - Saturday, 7 May, 2011, at 9:14:51 am

How often do you clean the MAF? and, Bobtesa - Saturday, 7 May, 2011, at 11:53:32 am

In theory, never. In practice,, dunno really. grant - Saturday, 7 May, 2011, at 12:57:51 pm

Re: How often do you clean the MAF? and, Blackboxst - Saturday, 7 May, 2011, at 1:32:34 pm

Admittedly, first rule is do no harm! *NM* grant - Saturday, 7 May, 2011, at 4:21:21 pm

Re: How often do you clean the MAF? and, Tnert - Saturday, 7 May, 2011, at 5:29:39 pm

Because, as i wrote, they are constantly getting slightly fouled by various contaminants. grant - Saturday, 7 May, 2011, at 11:02:09 pm

IIRC none of our cars use the hot-wire MAF. All use the hot film MAF which is much less.... MarcW - Sunday, 8 May, 2011, at 9:27:23 am

I'm in Metro NY ( New Jersey suburbs). My only solid experience was with my 2000 Audi.. grant - Sunday, 8 May, 2011, at 9:55:36 am

Re: How often do you clean the MAF? and, Ricey - Saturday, 7 May, 2011, at 6:00:42 pm

It has been a long time since I removed my car's TB. It was not hard, that I know, but I don't... MarcW - Sunday, 8 May, 2011, at 9:33:43 am

You could check the air filter Tom (Powell, OH) - Sunday, 8 May, 2011, at 10:26:08 am

Also this (long) weekend EdSac - Tuesday, 3 May, 2011, at 1:13:19 am

Re: Also this (long) weekend Guenter in Ontario - Tuesday, 3 May, 2011, at 7:50:39 am

Re: Also this (long) weekend BoxsterBob - San Carlos - Tuesday, 3 May, 2011, at 4:14:17 pm

Do you know how hard it is Guenter in Ontario - Tuesday, 3 May, 2011, at 5:23:15 pm

Re: Also this (long) weekend Charlie (Sacramento CA) - Tuesday, 3 May, 2011, at 9:59:51 pm

Charlie EdSac - Thursday, 5 May, 2011, at 12:05:34 pm

Re: Charlie Charlie (Sacramento CA) - Saturday, 7 May, 2011, at 10:27:05 pm

Hi Charlie... Pedro (Odessa, FL) - Thursday, 5 May, 2011, at 12:21:05 pm

Re: Hi Charlie... Charlie (Sacramento CA) - Saturday, 7 May, 2011, at 10:27:40 pm

further headlight discussion. UV sealer Petee_C - Thursday, 5 May, 2011, at 8:36:27 am

Those sealers... Pedro (Odessa, FL) - Thursday, 5 May, 2011, at 9:36:45 am

Re: further headlight discussion. UV sealer Capt Ron - Thursday, 5 May, 2011, at 7:03:56 pm

I have tried buffing the yellow haze only to have it come back. A friend told me about a company Naples986 - Friday, 6 May, 2011, at 7:23:42 pm

Re: further headlight discussion. UV sealer tamarsha - Friday, 6 May, 2011, at 11:09:58 pm

Some questions about a term that's been discussed before Laz - Saturday, 7 May, 2011, at 9:27:29 am

Re: Some questions about a term that's been discussed before tamarsha - Saturday, 7 May, 2011, at 8:17:54 pm

The cooling woes continue Yippee38 - Friday, 6 May, 2011, at 3:06:40 pm

25 psi too much pressure to use to pressure test system. IIRC the test pressure is 1.3 bar. MarcW - Friday, 6 May, 2011, at 11:33:09 pm

Re: 25 psi too much pressure to use to pressure test system. IIRC the test pressure is 1.3 bar. Yippee38 - Friday, 6 May, 2011, at 11:50:52 pm

Re: 25 psi too much pressure to use to pressure test system. IIRC the test pressure is 1.3 bar. joris - Saturday, 7 May, 2011, at 3:40:07 am

Uh, yes and no. Joris covers this in his post. I will add that cooling systems are funny... MarcW - Saturday, 7 May, 2011, at 10:02:21 am

I'm sure he meant 25 inches Hg, not 25 PSI. The gauge shows vacuum from 0-30 inches Hg *NM* Pedro (Odessa, FL) - Saturday, 7 May, 2011, at 9:33:39 am

Ah, yes in reading through the post again I agree. That amount of vacuum should not cause any.... MarcW - Saturday, 7 May, 2011, at 9:44:01 am

Re: I did mean 25 inches Hg, NM *NM* Yippee38 - Saturday, 7 May, 2011, at 11:48:54 am

Tip Service?... marbleheader - Thursday, 5 May, 2011, at 5:07:00 pm

That's a tough call. I'd hate to say "change the fluid" and then read a later post from you... MarcW - Thursday, 5 May, 2011, at 6:04:26 pm

Re: That's a tough call. I'd hate to say "change the fluid" and then read a later post from you... marbleheader - Thursday, 5 May, 2011, at 6:53:13 pm

Well, if you are happy with your indy and trust him then do as he advises. I'm not comfortable.... MarcW - Friday, 6 May, 2011, at 11:23:36 pm

Re: Well, if you are happy with your indy and trust him then do as he advises. I'm not comfortable.... marbleheader - Saturday, 7 May, 2011, at 5:04:19 am

Sorry. My comprehension is shot. I'm on a break, a much delayed break before heading back... MarcW - Saturday, 7 May, 2011, at 10:15:32 am

But a TIP fluid "change" really isn't mikefocke, '01S Sanford, NC - Friday, 6 May, 2011, at 8:04:16 am

Re: Tip Service?... Dale_K - Friday, 6 May, 2011, at 8:02:08 am

Service: absolutely. Flush no. Read more. grant - Friday, 6 May, 2011, at 12:20:15 pm

Re: Tip Service?... patrick - Friday, 6 May, 2011, at 3:34:59 pm

Brake Flush with Motive. - 01 Boxster S - screen on Master Cylinder Reservoir Petee_C - Monday, 2 May, 2011, at 1:45:49 pm

Are rebuild kits available for the Porsche/brembo calipers?
grant - Friday, 6 May, 2011, at 12:22:23 pm

Re: Are rebuild kits available for the Porsche/brembo calipers?
old timer - Friday, 6 May, 2011, at 2:35:30 pm

thanks. I'll go look.
grant - Friday, 6 May, 2011, at 3:32:50 pm

I rebuilt a set of Boxster calipers...
Cris - Friday, 6 May, 2011, at 7:22:39 pm

that compressor part is a challenege for me...
grant - Saturday, 7 May, 2011, at 9:10:55 am

you can remove pads then slowly push out the pistons
Cris - Saturday, 7 May, 2011, at 11:04:38 pm

thanks NM
grant - Sunday, 8 May, 2011, at 12:16:28 pm

Re: I rebuilt a set of Boxster calipers...
Blackboxst - Monday, 9 May, 2011, at 10:00:52 am

Do not re-use the seals
Red_Lightnin! - Monday, 9 May, 2011, at 5:24:48 pm

Agreed...
Pedro (Odessa, FL) - Monday, 9 May, 2011, at 5:54:47 pm

I'm not sure they need top be rebuilt, but you may have followed a recent thread... my pistons *were
grant - Monday, 9 May, 2011, at 9:25:04 pm

OK, that's a good reason! Just don't re-use the seals. NM
Red_Lightnin! - Tuesday, 10 May, 2011, at 3:46:30 pm

I have no idea if its a good reason, but I got blind sided and now i'm more cautious.
grant - Tuesday, 10 May, 2011, at 7:21:37 pm

I'm baaaaacck!
sasilverbullet - Tuesday, 10 May, 2011, at 4:38:16 pm

Welcome back...
Pedro (Odessa, FL) - Tuesday, 10 May, 2011, at 4:40:25 pm

Re: Welcome back! +1
Guenter in Ontario - Tuesday, 10 May, 2011, at 5:58:01 pm

The good thing is that...
Pedro (Odessa, FL) - Tuesday, 10 May, 2011, at 6:39:59 pm

...and they don't cost much scratch NM
Gary in SoFL - Tuesday, 10 May, 2011, at 6:50:23 pm

Automatic locking
Brasco - Monday, 9 May, 2011, at 7:21:23 pm

There are ...
Pedro (Odessa, FL) - Monday, 9 May, 2011, at 10:11:40 pm

Re: Automatic locking
db997S - Tuesday, 10 May, 2011, at 8:16:24 am

Re: Automatic locking
Brasco - Tuesday, 10 May, 2011, at 4:25:00 pm

Great timing. I finally get some time off and on I-80 across NV get a phone call that...
MarcW - Saturday, 7 May, 2011, at 10:36:32 am

$900? I have one word: raxles.com NM
grant - Saturday, 7 May, 2011, at 11:09:37 am

Speaking of crossing NV which we did this march in the Bullitt...
dennisafrompa - Monday, 9 May, 2011, at 7:39:37 am

It has been a long time since I've been this way, over I-80. At least 10 years... Is that right?...
MarcW - Monday, 9 May, 2011, at 9:27:03 am

I got stopped in WY....
dennisafrompa - Monday, 9 May, 2011, at 5:00:08 pm

Looks like Pedro is branching out - the Techno Jeep
Lawdevil & CURVN8R - Friday, 6 May, 2011, at 1:55:04 pm

I had similar sounds from my car and Pedro could not help me NM
Harvey in FL - Friday, 6 May, 2011, at 2:37:29 pm

Obviously just a cheap knockoff
Guenter in Ontario - Monday, 9 May, 2011, at 8:35:45 am

Remember your first ride?
Tom (Powell, OH) - Sunday, 8 May, 2011, at 10:29:57 am

Opening up the engine cover - what might I do?
Bobtesa - Friday, 6 May, 2011, at 11:12:12 am

Not much.
grant - Saturday, 7 May, 2011, at 9:14:51 am

How often do you clean the MAF? and,
Bobtesa - Saturday, 7 May, 2011, at 11:53:32 am

In theory, never. In practice,, dunno really.
grant - Saturday, 7 May, 2011, at 12:57:51 pm

Re: How often do you clean the MAF? and,
Blackboxst - Saturday, 7 May, 2011, at 1:32:34 pm

Admittedly, first rule is do no harm! NM
grant - Saturday, 7 May, 2011, at 4:21:21 pm

Re: How often do you clean the MAF? and,
Tnert - Saturday, 7 May, 2011, at 5:29:39 pm

Because, as i wrote, they are constantly getting slightly fouled by various contaminants.
grant - Saturday, 7 May, 2011, at 11:02:09 pm

IIRC none of our cars use the hot-wire MAF. All use the hot film MAF which is much less....
MarcW - Sunday, 8 May, 2011, at 9:27:23 am

I'm in Metro NY ( New Jersey suburbs). My only solid experience was with my 2000 Audi..
grant - Sunday, 8 May, 2011, at 9:55:36 am

Re: How often do you clean the MAF? and,
Ricey - Saturday, 7 May, 2011, at 6:00:42 pm

It has been a long time since I removed my car's TB. It was not hard, that I know, but I don't...
MarcW - Sunday, 8 May, 2011, at 9:33:43 am

You could check the air filter
Tom (Powell, OH) - Sunday, 8 May, 2011, at 10:26:08 am

Also this (long) weekend
EdSac - Tuesday, 3 May, 2011, at 1:13:19 am

Re: Also this (long) weekend
Guenter in Ontario - Tuesday, 3 May, 2011, at 7:50:39 am

Re: Also this (long) weekend
BoxsterBob - San Carlos - Tuesday, 3 May, 2011, at 4:14:17 pm

Do you know how hard it is
Guenter in Ontario - Tuesday, 3 May, 2011, at 5:23:15 pm

Re: Also this (long) weekend
Charlie (Sacramento CA) - Tuesday, 3 May, 2011, at 9:59:51 pm

Charlie
EdSac - Thursday, 5 May, 2011, at 12:05:34 pm

Re: Charlie
Charlie (Sacramento CA) - Saturday, 7 May, 2011, at 10:27:05 pm

Hi Charlie...
Pedro (Odessa, FL) - Thursday, 5 May, 2011, at 12:21:05 pm

Re: Hi Charlie...
Charlie (Sacramento CA) - Saturday, 7 May, 2011, at 10:27:40 pm

further headlight discussion. UV sealer
Petee_C - Thursday, 5 May, 2011, at 8:36:27 am

Those sealers...
Pedro (Odessa, FL) - Thursday, 5 May, 2011, at 9:36:45 am

Re: further headlight discussion. UV sealer
Capt Ron - Thursday, 5 May, 2011, at 7:03:56 pm

I have tried buffing the yellow haze only to have it come back. A friend told me about a company
Naples986 - Friday, 6 May, 2011, at 7:23:42 pm

Re: further headlight discussion. UV sealer
tamarsha - Friday, 6 May, 2011, at 11:09:58 pm

Some questions about a term that's been discussed before
Laz - Saturday, 7 May, 2011, at 9:27:29 am

Re: Some questions about a term that's been discussed before
tamarsha - Saturday, 7 May, 2011, at 8:17:54 pm

The cooling woes continue
Yippee38 - Friday, 6 May, 2011, at 3:06:40 pm

25 psi too much pressure to use to pressure test system. IIRC the test pressure is 1.3 bar.
MarcW - Friday, 6 May, 2011, at 11:33:09 pm

Re: 25 psi too much pressure to use to pressure test system. IIRC the test pressure is 1.3 bar.
Yippee38 - Friday, 6 May, 2011, at 11:50:52 pm

Re: 25 psi too much pressure to use to pressure test system. IIRC the test pressure is 1.3 bar.
joris - Saturday, 7 May, 2011, at 3:40:07 am

Uh, yes and no. Joris covers this in his post. I will add that cooling systems are funny...
MarcW - Saturday, 7 May, 2011, at 10:02:21 am

I'm sure he meant 25 inches Hg, not 25 PSI. The gauge shows vacuum from 0-30 inches Hg NM
Pedro (Odessa, FL) - Saturday, 7 May, 2011, at 9:33:39 am

Ah, yes in reading through the post again I agree. That amount of vacuum should not cause any....
MarcW - Saturday, 7 May, 2011, at 9:44:01 am

Re: I did mean 25 inches Hg, NM NM
Yippee38 - Saturday, 7 May, 2011, at 11:48:54 am

Tip Service?...
marbleheader - Thursday, 5 May, 2011, at 5:07:00 pm

That's a tough call. I'd hate to say "change the fluid" and then read a later post from you...
MarcW - Thursday, 5 May, 2011, at 6:04:26 pm

Re: That's a tough call. I'd hate to say "change the fluid" and then read a later post from you...
marbleheader - Thursday, 5 May, 2011, at 6:53:13 pm

Well, if you are happy with your indy and trust him then do as he advises. I'm not comfortable....
MarcW - Friday, 6 May, 2011, at 11:23:36 pm

Re: Well, if you are happy with your indy and trust him then do as he advises. I'm not comfortable....
marbleheader - Saturday, 7 May, 2011, at 5:04:19 am

Sorry. My comprehension is shot. I'm on a break, a much delayed break before heading back...
MarcW - Saturday, 7 May, 2011, at 10:15:32 am

But a TIP fluid "change" really isn't
mikefocke, '01S Sanford, NC - Friday, 6 May, 2011, at 8:04:16 am

Re: Tip Service?...
Dale_K - Friday, 6 May, 2011, at 8:02:08 am

Service: absolutely. Flush no. Read more.
grant - Friday, 6 May, 2011, at 12:20:15 pm

Re: Tip Service?...
patrick - Friday, 6 May, 2011, at 3:34:59 pm

Brake Flush with Motive. - 01 Boxster S - screen on Master Cylinder Reservoir
Petee_C - Monday, 2 May, 2011, at 1:45:49 pm

The reservior screen comes out on my 02 Boxster. You don't have to remove it but if you do...
MarcW - Monday, 2 May, 2011, at 2:21:33 pm