Main Forum

Discussion of Boxsters and other Porsches

Announcements		Last Post
	Instructions for posting photos (NEW & IMPROVED)	10/22/2011 09:51AM
	Our Rules	11/11/2010 04:00PM

Buying through this link, gets PB a donation.	Expect the best, and accept no substitute.

Page 169 of 215 Pages:

164 165 166 167 168169170 171 172 173

Forum List New Topic RSS

Post	Views
Remote Locking Rattling Sound John99Boxster - Sunday, 11 December, 2011, at 10:35:45 am	2,449
About the only thing I can think of is there is a plastic bushing that snaps into the wall... MarcW - Sunday, 11 December, 2011, at 10:59:53 am	1,235
Re: Remote Locking Rattling Sound SPG356 - Sunday, 11 December, 2011, at 11:16:58 am	1,436
Re: Remote Locking Rattling Sound John99Boxster - Sunday, 11 December, 2011, at 12:56:19 pm	1,134
Where exactly.... Pedro (Odessa, FL) - Sunday, 11 December, 2011, at 12:25:58 pm	1,181
Re: Where exactly.... John99Boxster - Sunday, 11 December, 2011, at 1:16:19 pm	1,143
Re: Where exactly.... John99Boxster - Sunday, 11 December, 2011, at 1:31:26 pm	1,180
Here is a picture John99Boxster - Sunday, 11 December, 2011, at 1:45:28 pm	1,226
There should be a little black rubber stopper Guenter in Ontario - Sunday, 11 December, 2011, at 1:52:23 pm	1,234
What is this? John99Boxster - Sunday, 11 December, 2011, at 1:58:32 pm	1,201
I GOT IT! John99Boxster - Sunday, 11 December, 2011, at 2:09:16 pm	1,163
Retention ring for the backup fuel filler door release bar10dah - Wednesday, 14 December, 2011, at 10:03:58 pm	1,504
To post pictures, see the instructions under "Announcements" near the top left. *NM* Guenter in Ontario - Sunday, 11 December, 2011, at 1:46:45 pm	1,258
Re: To post pictures, see the instructions under "Announcements" near the top left. John99Boxster - Sunday, 11 December, 2011, at 1:52:14 pm	1,181
Is the the rubber stopper...looks like its missing 1/2 of the circle John99Boxster - Sunday, 11 December, 2011, at 2:03:13 pm	1,160
Problem resolved....THANK YOU ALL NM *NM* John99Boxster - Sunday, 11 December, 2011, at 2:10:17 pm	1,422
Thank goodness. The rattling was Guenter in Ontario - Sunday, 11 December, 2011, at 3:32:26 pm	1,106
Re: Thank goodness. The rattling was John99Boxster - Sunday, 11 December, 2011, at 4:49:06 pm	1,213
DIY to replace the actuator bar10dah - Wednesday, 14 December, 2011, at 10:23:46 pm	3,893
New Boxster Pics and Article Todd in PA - Tuesday, 13 December, 2011, at 7:36:32 am	2,468
So much for evolution over revolution db997S - Tuesday, 13 December, 2011, at 8:44:23 am	1,264
I think... Pedro (Odessa, FL) - Tuesday, 13 December, 2011, at 10:22:29 am	1,100
I like it a lot Lawdevil & CURVN8R - Tuesday, 13 December, 2011, at 8:00:29 pm	1,019
Re: New Boxster Pics and Article jwdbox - Tuesday, 13 December, 2011, at 11:12:37 am	995
I'd like to see it "in the metal" first Guenter in Ontario - Tuesday, 13 December, 2011, at 11:20:17 am	1,087
These wheels are "HUGE 18-inch alloys", however Gary in SoFL - Tuesday, 13 December, 2011, at 11:41:00 am	1,082
Thanks for clarifying that Gary Guenter in Ontario - Tuesday, 13 December, 2011, at 5:35:21 pm	1,063
I have the Gimungus 19" wheels on mine! *NM* nmanitou (Doug in MI) - Tuesday, 13 December, 2011, at 6:55:29 pm	1,390
"Gimungus" 19s would be a better fit on these cars: Laz - Wednesday, 14 December, 2011, at 1:19:20 pm	985
Re: Thanks for clarifying that Gary Leor ('09S, North of Boston) - Tuesday, 13 December, 2011, at 7:15:14 pm	989
Re: New Boxster Pics and Article TedP - Tuesday, 13 December, 2011, at 10:45:54 pm	954
Re: New Boxster Pics and Article silverbox03 - Wednesday, 14 December, 2011, at 6:20:03 pm	944
Oil change now or wait? Bob D - Thursday, 8 December, 2011, at 1:04:06 pm	1,702
It depends Guenter in Ontario - Thursday, 8 December, 2011, at 1:20:23 pm	977
Re: Oil change now or wait? boxsterd - Thursday, 8 December, 2011, at 1:33:28 pm	914
Fine to wait. A few comments though. grant - Thursday, 8 December, 2011, at 7:57:01 pm	997
Thanks to all for your comments *NM* Bob D - Wednesday, 14 December, 2011, at 9:31:10 am	999
Can't find a link: wiring garage remote to 12V and hiding opener in front bumper AndyInNYC - Tuesday, 13 December, 2011, at 11:54:25 am	3,578
Re: Can't find a link: wiring garage remote to 12V and hiding opener in front bumper bgale (Montrose,CO) - Tuesday, 13 December, 2011, at 12:25:24 pm	1,665
Here's one... BoxsterBob - San Carlos - Tuesday, 13 December, 2011, at 4:48:54 pm	1,450
Re: Here's one... AndyInNYC - Tuesday, 13 December, 2011, at 5:05:08 pm	1,433
How about Guenter in Ontario - Tuesday, 13 December, 2011, at 5:44:27 pm	1,425
Re: Can't find a link: wiring garage remote to 12V and hiding opener in front bumper SPG356 - Tuesday, 13 December, 2011, at 6:03:21 pm	1,400
Re: Can't find a link: wiring garage remote to 12V and hiding opener in front bumper Al in Melbourne Beach - Tuesday, 13 December, 2011, at 6:42:40 pm	1,400
Al, that seems to be exactly what I'm looking for AndyInNYC - Tuesday, 13 December, 2011, at 6:48:47 pm	1,421
Re: Al, that seems to be exactly what I'm looking for SPG356 - Tuesday, 13 December, 2011, at 10:02:52 pm	1,511
Re: Al, that seems to be exactly what I'm looking for (Long) Al in Melbourne Beach - Tuesday, 13 December, 2011, at 10:28:46 pm	1,527
engine swap getready - Tuesday, 13 December, 2011, at 5:44:19 pm	1,828
Re: engine swap BoxsterBob - San Carlos - Tuesday, 13 December, 2011, at 7:19:42 pm	1,041
Metallic whine At startup? wewannaporsche - Tuesday, 13 December, 2011, at 1:38:09 pm	1,620
Its the cold air pump.... jg wnc - Tuesday, 13 December, 2011, at 2:32:13 pm	838
Re: Metallic whine At startup? Laz - Tuesday, 13 December, 2011, at 3:58:28 pm	867
TechnoPower2 Kit installed.. CAN YOU SAY TORQUE! BOB W - Friday, 9 December, 2011, at 9:17:58 pm	2,264
Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE! BOB W - Friday, 9 December, 2011, at 9:25:05 pm	1,247
Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE! rrr - Saturday, 10 December, 2011, at 10:21:58 pm	1,033
I don't like.... Pedro (Odessa, FL) - Sunday, 11 December, 2011, at 5:13:07 pm	1,061
Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE! rrr - Sunday, 11 December, 2011, at 6:04:18 pm	1,003
You are correct... Pedro (Odessa, FL) - Monday, 12 December, 2011, at 10:09:00 am	1,073
Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE! jlegelis - Monday, 12 December, 2011, at 2:57:38 pm	1,011
I use the ... Pedro (Odessa, FL) - Monday, 12 December, 2011, at 8:55:31 pm	1,071
Be sure to check the 'FOR SALE' section for specials....you just never know what you might find Eric (Plug Guy) - Monday, 12 December, 2011, at 2:21:44 pm	1,598
Thank you Eric! *NM* Pedro (Odessa, FL) - Monday, 12 December, 2011, at 3:23:46 pm	877
Today I almost lost my chance for a 100K mile Boxster..... Tony in Whittier - Friday, 9 December, 2011, at 9:04:32 pm	1,706
Tony, Glad all turned out well dghii - Friday, 9 December, 2011, at 10:37:51 pm	900
Re: Today I almost lost my chance for a 100K mile Boxster..... Guenter in Ontario - Friday, 9 December, 2011, at 10:57:07 pm	849
Re: Today I almost lost my chance for a 100K mile Boxster..... CarreraLicious - Saturday, 10 December, 2011, at 9:46:02 am	819
it's what i call the nintendo mentality frogster - Sunday, 11 December, 2011, at 12:49:45 am	909
If I ever need to get rid of the Fikse Mach Vs, you will the be the first to know. *NM* Tony in Whittier - Sunday, 11 December, 2011, at 1:25:51 am	899
Cool! But give me a bit of advance notice… frogster - Sunday, 11 December, 2011, at 11:12:19 am	903
Re: Today I almost lost my chance for a 100K mile Boxster..... db997S - Monday, 12 December, 2011, at 10:01:31 am	765
3.4 replacing a 3.2 juliof16c - Friday, 2 December, 2011, at 12:01:25 am	2,403
Re: 3.4 replacing a 3.2 BoxsterBob - San Carlos - Friday, 2 December, 2011, at 9:55:05 am	1,453
Re: 3.4 replacing a 3.2 jg wnc - Friday, 2 December, 2011, at 11:06:14 am	1,240
Re: 3.4 replacing a 3.2 whall - Friday, 2 December, 2011, at 12:00:01 pm	1,355
For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt *NM* patrick - Friday, 2 December, 2011, at 9:19:46 pm	1,484
Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt juliof16c - Sunday, 4 December, 2011, at 12:07:20 am	1,806
Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt Eric in Lincoln - Sunday, 4 December, 2011, at 12:17:26 am	1,493
Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt juliof16c - Sunday, 4 December, 2011, at 1:53:47 am	1,517
Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt whall - Sunday, 4 December, 2011, at 1:10:25 pm	1,791
Generally the best course of action is to use an engine of a similar MY... MarcW - Monday, 5 December, 2011, at 9:23:41 am	1,396
Re: Generally the best course of action is to use an engine of a similar MY... juliof16c - Sunday, 11 December, 2011, at 10:39:32 am	1,665
Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt patrick - Thursday, 8 December, 2011, at 2:07:22 pm	1,357
Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt juliof16c - Tuesday, 6 December, 2011, at 8:31:59 am	1,318
Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt whall - Tuesday, 6 December, 2011, at 5:44:49 pm	1,511
I think m97.21 did have IMS and was not DFI Lawdevil & CURVN8R - Wednesday, 7 December, 2011, at 9:19:23 am	1,464
Re: I think m97.21 did have IMS and was not DFI OUCH! whall - Wednesday, 7 December, 2011, at 2:31:25 pm	2,728
Re: That serves me right for coming out of the shadows ... Pedro (Odessa, FL) - Thursday, 8 December, 2011, at 8:08:16 am	1,353
Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt juliof16c - Thursday, 8 December, 2011, at 7:32:30 am	1,418
If I recall correctly, FX means it's a factory remanufactured engine. Laz - Thursday, 8 December, 2011, at 2:35:04 pm	1,817
Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt whall - Thursday, 8 December, 2011, at 8:20:46 pm	1,976
FWIW those prices are quite close the prices I was quoted for a new 2.7l engine for... MarcW - Sunday, 11 December, 2011, at 10:52:43 am	1,460
Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt juliof16c - Saturday, 10 December, 2011, at 1:09:02 am	1,429
Watch your summer tires in cooler/wetter weather... Had a close call today... MarcW - Monday, 28 November, 2011, at 7:03:13 pm	2,162
Re: Watch your summer tires in cooler/wetter weather... Had a close call today... BoxsterBob - San Carlos - Monday, 28 November, 2011, at 7:15:21 pm	1,238
Learned to keep the wheel straight in driver's ed, a looong time ago. *NM* Laz - Monday, 28 November, 2011, at 9:25:34 pm	1,095
Re: Learned to keep the wheel straight in driver's ed, a looong time ago. BoxsterBob - San Carlos - Tuesday, 29 November, 2011, at 12:04:57 pm	1,139
Unfortunately, the older you get, you forget far more than you learn *NM* db997S - Tuesday, 29 November, 2011, at 12:43:53 pm	1,087
I see lotsa rear-enders due to tailgating and lack of attention, so I do this most of the time. *NM* Laz - Tuesday, 29 November, 2011, at 3:21:47 pm	1,113
Re: Watch your summer tires in cooler/wetter weather... Had a close call today... MikenOH - Tuesday, 29 November, 2011, at 5:13:47 pm	1,098
Tire life Bobtesa - Friday, 2 December, 2011, at 11:45:46 pm	1,100
That comes from concerns over dry rot. Which is.. grant - Saturday, 3 December, 2011, at 9:33:11 am	1,175
Coincidentally, my local mechanic and I discussed aging tires and heat cycling a couple days ago.. Laz - Saturday, 3 December, 2011, at 9:44:43 am	1,111
Laz, why wait? Bobtesa - Saturday, 3 December, 2011, at 9:56:49 am	1,126
To be clear: the TPTs are bad, but I also have 4 mounted snows going on soon, that are old but good. *NM* Laz - Saturday, 3 December, 2011, at 10:59:22 am	1,125
By the way, is this your car? Laz - Saturday, 3 December, 2011, at 11:14:22 am	1,062
I was off yesterday and had my car in for a pre-road trip inspection. While I was there I spotted... MarcW - Saturday, 3 December, 2011, at 5:07:36 pm	1,055
Re: That comes from concerns over dry rot. Which is.. paulwdenton - Monday, 5 December, 2011, at 9:46:24 am	1,225
Couple of things come to mind. The 6 years age limit we read about is applied to high.... MarcW - Tuesday, 6 December, 2011, at 3:58:00 pm	1,087
Question: The limit possibly applying only to the performance tire because of Laz - Tuesday, 6 December, 2011, at 5:20:01 pm	1,124
Grant appears to responded better than I could have. Porsche... MarcW - Wednesday, 7 December, 2011, at 2:27:14 pm	1,134
The only actual reference to 6 years i know of was some tire industry agreement grant - Thursday, 8 December, 2011, at 12:26:45 pm	1,061
I agree, Grant. It's best to go case by case. Laz - Thursday, 8 December, 2011, at 12:38:21 pm	1,181
Porsche in its factory manual section on tires states.... MarcW - Thursday, 8 December, 2011, at 1:02:48 pm	1,197
no tools required, although a black light helps grant - Thursday, 8 December, 2011, at 2:46:06 pm	1,050
The car owner is faced then with the added effort of finding a tire store that can and will... MarcW - Saturday, 10 December, 2011, at 10:44:39 am	1,018
no dilemma grant - Saturday, 10 December, 2011, at 3:08:09 pm	1,140
1. - Industry does not distinguish between HP and normal tires; 2.- you can test, as i explained, grant - Wednesday, 7 December, 2011, at 10:30:48 am	1,068
Had two occasions where tires cost me a car mikefocke, '01S Sanford, NC - Saturday, 10 December, 2011, at 5:27:49 pm	1,042
front trunk hood sticks jmr986 - Sunday, 4 December, 2011, at 9:34:02 pm	1,685
My 02's front trunk lid is not quite as bad but nearly so. I think the problem is the latch... MarcW - Monday, 5 December, 2011, at 9:12:22 am	821
Re: My 02's front trunk lid is not quite as bad but nearly so. I think the problem is the latch... jmr986 - Monday, 5 December, 2011, at 5:09:58 pm	918
Had a chance the other day to ask a tech about this symptom and he confirmed the latch... MarcW - Saturday, 10 December, 2011, at 10:26:32 am	843
Also, should the hood not stay up well once fully opened, Laz - Monday, 5 December, 2011, at 9:19:39 am	858
Re: front trunk hood sticks BoxsterBob - San Carlos - Monday, 5 December, 2011, at 11:35:30 am	811
Under the front edge ... Pedro (Odessa, FL) - Saturday, 10 December, 2011, at 10:32:51 am	880
When shut, the hood's leading edge should be just below the nose's trailing edge. Laz - Saturday, 10 December, 2011, at 1:23:12 pm	885
Tire Life expectancy (6 year discussion) grant - Friday, 9 December, 2011, at 12:16:52 pm	2,626
Re: Tire Life expectancy (6 year discussion) Guenter in Ontario - Friday, 9 December, 2011, at 1:34:14 pm	1,139
Re: Tire Life expectancy (6 year discussion) BoxsterBob - San Carlos - Friday, 9 December, 2011, at 1:44:54 pm	923
Re: Tire Life expectancy (6 year discussion) Guenter in Ontario - Friday, 9 December, 2011, at 3:53:14 pm	872
Amusingly i ran several DEs on NOS 8+ year old Pirelli P zeros grant - Friday, 9 December, 2011, at 4:33:28 pm	1,182
Just turned over 100K in my 2000S... dghii - Thursday, 8 December, 2011, at 5:41:06 pm	1,606
Congratulations!!!!!!!!!! Guenter in Ontario - Thursday, 8 December, 2011, at 6:20:10 pm	887
Thanks! dghii - Thursday, 8 December, 2011, at 10:11:55 pm	911
Re: Thanks! Guenter in Ontario - Thursday, 8 December, 2011, at 11:24:56 pm	865
Re: Just turned over 100K in my 2000S... BoxsterBob - San Carlos - Thursday, 8 December, 2011, at 11:11:01 pm	877
Congratulations! Tony in Whittier - Thursday, 8 December, 2011, at 11:32:24 pm	934
Re: Now have 111K Joseph in NJ - Friday, 9 December, 2011, at 3:59:21 am	932
Here's to the next 100K! *NM* Pedro (Odessa, FL) - Friday, 9 December, 2011, at 9:56:36 am	828
Re: Just turned over 100K in my 2000S... Dale_K - Friday, 9 December, 2011, at 10:17:09 am	828
Re: Just turned over 100K in my 2000S... John99Boxster - Friday, 9 December, 2011, at 2:51:06 pm	788
Re: Just turned over 100K in my 2000S... dghii - Friday, 9 December, 2011, at 4:05:33 pm	785
Ready to install a new top on my '99 BoxsterBob - San Carlos - Tuesday, 6 December, 2011, at 3:46:04 pm	1,687
Re: Ready to install a new top on my '99 MauriceonLongIsland - Tuesday, 6 December, 2011, at 4:56:52 pm	1,147
Re: Ready to install a new top on my '99 BoxsterBob - San Carlos - Tuesday, 6 December, 2011, at 6:05:41 pm	951
I did the work on a 98 top and frame earlier this year... dghii - Tuesday, 6 December, 2011, at 5:52:00 pm	1,079
Re: I did the work on a 98 top and frame earlier this year... BoxsterBob - San Carlos - Tuesday, 6 December, 2011, at 6:06:05 pm	1,094
Re: I did the work on a 98 top and frame earlier this year... Al in Melbourne Beach - Tuesday, 6 December, 2011, at 8:59:39 pm	1,098
Re: I did the work on a 98 top and frame earlier this year... boxsterd - Thursday, 8 December, 2011, at 2:39:38 am	1,052
How much did you pay for the frame and top? *NM* boxsterd - Wednesday, 7 December, 2011, at 8:51:10 pm	1,110
The top and frame I put on my 98 was $550 shipped. dghii - Wednesday, 7 December, 2011, at 11:23:54 pm	1,148
Re: How much did you pay for the frame and top? Al in Melbourne Beach - Thursday, 8 December, 2011, at 3:01:01 am	1,200
I'd jump on that too! dghii - Thursday, 8 December, 2011, at 5:37:43 pm	1,053
Re: I'd jump on that too! Al in Melbourne Beach - Thursday, 8 December, 2011, at 8:47:57 pm	1,076
Seat belt woes in my '09 S TedP - Saturday, 3 December, 2011, at 10:36:14 am	1,452
Re: Seat belt woes in my '09 S Guenter in Ontario - Saturday, 3 December, 2011, at 11:00:24 am	836
No offense meant, but years ago a Honda mechanic told me to clean the straps. Laz - Saturday, 3 December, 2011, at 11:07:50 am	1,009
Re: No offense meant, but years ago a Honda mechanic told me to clean the straps. TedP - Saturday, 3 December, 2011, at 6:06:05 pm	828
Not even a hint of a problem here... Leor ('09S, North of Boston) - Wednesday, 7 December, 2011, at 10:46:06 pm	863
Re: Not even a hint of a problem here... 2009 Base OK with 30K+ AS2003 - Thursday, 8 December, 2011, at 5:09:18 pm	817
Finding Castrol Edge 5W40....? MikeTZ - Monday, 5 December, 2011, at 9:22:12 am	1,860
Just picked some up at AutoZone last Friday.... jg wnc - Monday, 5 December, 2011, at 10:18:10 am	861
All castrol synthetic is being rebranded Edge grant - Monday, 5 December, 2011, at 11:00:32 am	836
Re: All castrol synthetic is being rebranded Edge MikenOH - Wednesday, 7 December, 2011, at 9:15:24 pm	820
I cant recall the details, btu its very clearly labeled. (more) grant - Thursday, 8 December, 2011, at 12:18:54 pm	810
F1 back on track...yes Harvey in FL - Wednesday, 7 December, 2011, at 1:02:55 pm	1,314
Excellent! *NM* SMILIN - Thursday, 8 December, 2011, at 11:41:38 am	842
New Battery in 2000S today dghii - Wednesday, 7 December, 2011, at 4:48:51 pm	1,445
Testing the 991 in hot and cold Guenter in Ontario - Tuesday, 6 December, 2011, at 8:57:42 am	1,508
Re: Testing the 991 in hot and cold dak911 - Tuesday, 6 December, 2011, at 6:48:22 pm	1,037
Sign me up, agree with you Guenter what a great job *NM* DougW - Tuesday, 6 December, 2011, at 8:22:00 pm	1,080
Wonder what the Artic Circle testers did wrong to get that assignment? Brrrrrr *NM* db997S - Wednesday, 7 December, 2011, at 8:29:12 am	880
Look at all the work they've done so you don't have to hide your Porsche in winter for 6 months *NM* Gary in SoFL - Wednesday, 7 December, 2011, at 7:30:42 am	914
NBC: An 11 car pile up in Japan takes out 8 F-cars, Two MBs and a Lambo db997S - Monday, 5 December, 2011, at 9:10:05 am	1,760
Which goes to show that Guenter in Ontario - Monday, 5 December, 2011, at 9:19:13 am	970
Re: Which goes to show that BoxsterBob - San Carlos - Monday, 5 December, 2011, at 11:26:57 am	924
Re: Which goes to show that db997S - Monday, 5 December, 2011, at 12:42:17 pm	903
The Fs in the photos are left-hand drive cars... *NM* Gary in SoFL - Monday, 5 December, 2011, at 1:31:33 pm	943
At least one of those cars is now right hand drive. *NM* Laz - Monday, 5 December, 2011, at 9:11:56 pm	913
Re: Which goes to show that Dave In MD - Monday, 5 December, 2011, at 3:24:39 pm	912
sponsored by Porsche Club Japan *NM* frogster - Tuesday, 6 December, 2011, at 11:29:11 pm	900
DIY Transmission Rebuild? crumbum - Sunday, 4 December, 2011, at 5:40:27 pm	2,120
Are you sure the shifter and linkage is aligned correctly? MarknearChicago - Sunday, 4 December, 2011, at 10:47:15 pm	1,356
Re: DIY Transmission Rebuild? por911(bc) - Sunday, 4 December, 2011, at 11:12:09 pm	1,680
Re: DIY Transmission Rebuild? crumbum - Sunday, 4 December, 2011, at 11:43:56 pm	2,621
Tranny rebuild DIY? Maybe. I'm away from my references for a few days but when I get a chance.... MarcW - Monday, 5 December, 2011, at 9:05:28 am	1,197
Re: DIY Transmission Rebuild? danz76 - Monday, 5 December, 2011, at 3:41:10 pm	3,359
There are lots of transmissions mikefocke, '01S Sanford, NC - Monday, 5 December, 2011, at 6:47:23 pm	1,342
While waiting for my Turbo to be serviced asked a tech about the tranny rebuild... MarcW - Tuesday, 6 December, 2011, at 3:49:48 pm	1,309
Re: DIY Transmission Rebuild? The Radium King - Tuesday, 6 December, 2011, at 10:57:43 pm	1,288
Ouch grant - Monday, 5 December, 2011, at 11:13:06 am	1,897
Re: Ouch BoxsterBob - San Carlos - Monday, 5 December, 2011, at 11:23:24 am	941
Re: Ouch Guenter in Ontario - Monday, 5 December, 2011, at 11:34:03 am	925
Re: Ouch BoxsterBob - San Carlos - Monday, 5 December, 2011, at 12:00:38 pm	932
*NM* Roger987 - Monday, 5 December, 2011, at 12:48:21 pm	934
Parallel universe you suppose *NM* Gary in SoFL - Monday, 5 December, 2011, at 1:33:04 pm	972
Here's some news footage... BoxsterBob - San Carlos - Monday, 5 December, 2011, at 5:42:18 pm	1,017
No translation required.... carlos in Montreal - Monday, 5 December, 2011, at 6:21:12 pm	1,037
"blah, blah sportscar, blah, blah, blah sportscar" grant - Monday, 5 December, 2011, at 7:08:15 pm	946
Re: "blah, blah sportscar, blah, blah, blah sportscar" Guenter in Ontario - Monday, 5 December, 2011, at 9:09:50 pm	937
Kind of like the cartoon in this linked article: Laz - Monday, 5 December, 2011, at 9:36:57 pm	964
Yep Ginger. You got my inference :-) *NM* grant - Tuesday, 6 December, 2011, at 12:25:44 pm	929
Arf! *NM* Laz - Tuesday, 6 December, 2011, at 1:50:49 pm	959
Well, someone has to say it.. Roger987 - Monday, 5 December, 2011, at 8:56:24 pm	1,018
Re: Well, someone has to say it.. Guenter in Ontario - Monday, 5 December, 2011, at 9:05:08 pm	927
Take a look at the bottom "before" photo at this link: Laz - Monday, 5 December, 2011, at 9:09:53 pm	996
High quality spy shots of the 2013 Boxster BoxsterBob - San Carlos - Friday, 2 December, 2011, at 6:58:54 pm	2,745
Re: High quality spy shots of the 2013 Boxster Roger987 - Friday, 2 December, 2011, at 7:12:15 pm	1,166
try this mikefocke, '01S Sanford, NC - Friday, 2 December, 2011, at 7:59:50 pm	1,194
Re: try this BoxsterBob - San Carlos - Friday, 2 December, 2011, at 8:37:13 pm	1,107
Thanks Bob and Mike Guenter in Ontario - Friday, 2 December, 2011, at 9:02:13 pm	1,157
Only one picture here, but a writer that got to ride shotgun Guenter in Ontario - Friday, 2 December, 2011, at 9:23:12 pm	1,464
"the five-dial instrument binnacle remains." Lawdevil & CURVN8R - Friday, 2 December, 2011, at 10:17:35 pm	1,336
For what it's worth, there's this 2013 image: Laz - Saturday, 3 December, 2011, at 12:02:39 pm	1,207
Re: For what it's worth, there's this 2013 image: Guenter in Ontario - Saturday, 3 December, 2011, at 12:32:07 pm	1,223
Yes, the image looked familiar. Sloppy publishing or deliberately misleading. Why either, I ask. *NM* Laz - Saturday, 3 December, 2011, at 12:53:24 pm	1,286
i'll take one of those concepts, thanks! TheFarmer - Sunday, 4 December, 2011, at 8:47:47 pm	1,314
The concept car is beautiful but the side intakes are way too low for actual road conditions: Laz - Monday, 5 December, 2011, at 9:09:07 am	1,143
he's not saying that the five-dial instrument binnacle remains. frogster - Monday, 5 December, 2011, at 1:36:14 am	1,128
And the blatant use of a ten-plus year old car to represent the "2013" model. Laz - Monday, 5 December, 2011, at 9:14:44 am	1,190
I read it and I am not sure what he means. However,.. Lawdevil & CURVN8R - Monday, 5 December, 2011, at 9:36:10 am	1,146
Re: I read it and I am not sure what he means. However,.. db997S - Monday, 5 December, 2011, at 1:35:05 pm	1,301
true - but why would he have mentioned it if it had three dials. Lawdevil & CURVN8R - Monday, 5 December, 2011, at 5:00:36 pm	1,179
Re: true - but why would he have mentioned it if it had three dials. db997S - Tuesday, 6 December, 2011, at 8:45:38 am	1,213
New Boxster Roger987 - Sunday, 4 December, 2011, at 7:29:22 pm	1,208
wish I'd seen it Steve (Morro Bay) - Saturday, 3 December, 2011, at 12:39:04 am	1,164
I would hardly call these "spy" shots though frogster - Monday, 5 December, 2011, at 1:23:12 am	1,292
Re: I would hardly call these "spy" shots though BoxsterBob - San Carlos - Monday, 5 December, 2011, at 11:54:05 am	1,187
Traffic while fueling the Boxster BoxsterJim - Monday, 5 December, 2011, at 5:29:30 pm	1,987
You're all running into each other only figuratively, rather than literally, like those Ferraris. *NM* Laz - Monday, 5 December, 2011, at 9:41:34 pm	1,010
Yet another warning: Watch for rodents! Stopped in at a dealership today... MarcW - Thursday, 1 December, 2011, at 2:48:56 pm	1,832
Re: Yet another warning: Watch for rodents! Stopped in at a dealership today... db997S - Thursday, 1 December, 2011, at 3:02:53 pm	1,044
Re: Watch for rodents! last yr got a call, congrats you are father of 5 mice in vent system. *NM* Clif R - Friday, 2 December, 2011, at 4:02:53 pm	1,150
Re: Yet another warning: Watch for rodents! Stopped in at a dealership today... getready - Friday, 2 December, 2011, at 6:07:39 pm	1,140
Whatever works. I got a better look at the Cayman with the damage... MarcW - Saturday, 3 December, 2011, at 5:17:06 pm	1,133
Correction. As I mentioned in an earlier post the main harness is not shot....but the cost... MarcW - Monday, 5 December, 2011, at 8:59:00 am	1,153
weasels were a big problem in switzerland when i lived there frogster - Monday, 5 December, 2011, at 1:20:18 am	1,427
I'd bet a lot of weasels keep their money in Swiss banks. *NM* Laz - Monday, 5 December, 2011, at 9:14:27 pm	1,090
Headlight replacement troubles tom coughlin - Thursday, 1 December, 2011, at 9:14:46 am	1,655
Part of the repair to my car after a deer collision required not only a new headlight but... MarcW - Thursday, 1 December, 2011, at 2:34:24 pm	921
You can gain access to the rear of the headlight assembly MauriceonLongIsland - Sunday, 4 December, 2011, at 1:24:50 am	1,021
Maurice-great tip. The problem seems to be a bad connector. tom coughlin - Monday, 5 December, 2011, at 9:02:05 am	1,042
Re: Maurice-great tip. The problem seems to be a bad connector. mikefocke, '01S Sanford, NC - Monday, 5 December, 2011, at 2:28:01 pm	953
Re: Headlight replacement troubles crumbum - Monday, 5 December, 2011, at 2:53:39 pm	1,064
OK, one more reason to drive a manual. Guenter in Ontario - Sunday, 4 December, 2011, at 9:59:26 pm	1,449
were the thieves women? frogster - Monday, 5 December, 2011, at 1:00:05 am	874
Re: were the thieves women? Guenter in Ontario - Monday, 5 December, 2011, at 9:17:15 am	846
I wonder if the thieves and/or the 23 year old girlfriend were "strippers." Laz - Monday, 5 December, 2011, at 9:31:11 am	851
Just sharing some pics John B in SC - Sunday, 4 December, 2011, at 5:48:51 pm	2,107
Thanks for posting! Some great looking cars for sure *NM* jwdbox - Sunday, 4 December, 2011, at 6:12:23 pm	905
Great shots! Thanks *NM* TheFarmer - Sunday, 4 December, 2011, at 8:40:07 pm	1,002
Better late than never Guenter in Ontario - Sunday, 4 December, 2011, at 9:51:00 pm	906
Re: Just sharing some pics BoxsterBob - San Carlos - Sunday, 4 December, 2011, at 10:31:35 pm	935
"Boxster S (2000) feature is a top headliner that adds a significant sound barrier." sonicworld - Sunday, 4 December, 2011, at 8:14:06 am	1,603
Art some point they switched from a 2-layer top to 3. It must have appeared first on the S. grant - Sunday, 4 December, 2011, at 8:20:25 am	895
Oh, i should point you to... grant - Sunday, 4 December, 2011, at 8:22:29 am	902
Re: Art some point they switched from a 2-layer top to 3. It must have appeared first on the S. sonicworld - Sunday, 4 December, 2011, at 8:29:02 am	881
The headliner ... Pedro (Odessa, FL) - Sunday, 4 December, 2011, at 8:26:48 am	907
Re: The headliner ... sonicworld - Sunday, 4 December, 2011, at 8:30:47 am	980
a comment.... por911(bc) - Sunday, 4 December, 2011, at 3:58:03 pm	975

Forum List New Topic RSS

Page 169 of 215 Pages:

164 165 166 167 168169170 171 172 173

Main Forum

Remote Locking Rattling Sound John99Boxster - Sunday, 11 December, 2011, at 10:35:45 am

About the only thing I can think of is there is a plastic bushing that snaps into the wall... MarcW - Sunday, 11 December, 2011, at 10:59:53 am

Re: Remote Locking Rattling Sound SPG356 - Sunday, 11 December, 2011, at 11:16:58 am

Re: Remote Locking Rattling Sound John99Boxster - Sunday, 11 December, 2011, at 12:56:19 pm

Where exactly.... Pedro (Odessa, FL) - Sunday, 11 December, 2011, at 12:25:58 pm

Re: Where exactly.... John99Boxster - Sunday, 11 December, 2011, at 1:16:19 pm

Re: Where exactly.... John99Boxster - Sunday, 11 December, 2011, at 1:31:26 pm

Here is a picture John99Boxster - Sunday, 11 December, 2011, at 1:45:28 pm

There should be a little black rubber stopper Guenter in Ontario - Sunday, 11 December, 2011, at 1:52:23 pm

What is this? John99Boxster - Sunday, 11 December, 2011, at 1:58:32 pm

I GOT IT! John99Boxster - Sunday, 11 December, 2011, at 2:09:16 pm

Retention ring for the backup fuel filler door release bar10dah - Wednesday, 14 December, 2011, at 10:03:58 pm

To post pictures, see the instructions under "Announcements" near the top left. *NM* Guenter in Ontario - Sunday, 11 December, 2011, at 1:46:45 pm

Re: To post pictures, see the instructions under "Announcements" near the top left. John99Boxster - Sunday, 11 December, 2011, at 1:52:14 pm

Is the the rubber stopper...looks like its missing 1/2 of the circle John99Boxster - Sunday, 11 December, 2011, at 2:03:13 pm

Problem resolved....THANK YOU ALL *NM* *NM* John99Boxster - Sunday, 11 December, 2011, at 2:10:17 pm

Thank goodness. The rattling was Guenter in Ontario - Sunday, 11 December, 2011, at 3:32:26 pm

Re: Thank goodness. The rattling was John99Boxster - Sunday, 11 December, 2011, at 4:49:06 pm

DIY to replace the actuator bar10dah - Wednesday, 14 December, 2011, at 10:23:46 pm

New Boxster Pics and Article Todd in PA - Tuesday, 13 December, 2011, at 7:36:32 am

So much for evolution over revolution db997S - Tuesday, 13 December, 2011, at 8:44:23 am

I think... Pedro (Odessa, FL) - Tuesday, 13 December, 2011, at 10:22:29 am

I like it a lot Lawdevil & CURVN8R - Tuesday, 13 December, 2011, at 8:00:29 pm

Re: New Boxster Pics and Article jwdbox - Tuesday, 13 December, 2011, at 11:12:37 am

I'd like to see it "in the metal" first Guenter in Ontario - Tuesday, 13 December, 2011, at 11:20:17 am

These wheels are "HUGE 18-inch alloys", however Gary in SoFL - Tuesday, 13 December, 2011, at 11:41:00 am

Thanks for clarifying that Gary Guenter in Ontario - Tuesday, 13 December, 2011, at 5:35:21 pm

I have the Gimungus 19" wheels on mine! *NM* nmanitou (Doug in MI) - Tuesday, 13 December, 2011, at 6:55:29 pm

"Gimungus" 19s would be a better fit on these cars: Laz - Wednesday, 14 December, 2011, at 1:19:20 pm

Re: Thanks for clarifying that Gary Leor ('09S, North of Boston) - Tuesday, 13 December, 2011, at 7:15:14 pm

Re: New Boxster Pics and Article TedP - Tuesday, 13 December, 2011, at 10:45:54 pm

Re: New Boxster Pics and Article silverbox03 - Wednesday, 14 December, 2011, at 6:20:03 pm

Oil change now or wait? Bob D - Thursday, 8 December, 2011, at 1:04:06 pm

It depends Guenter in Ontario - Thursday, 8 December, 2011, at 1:20:23 pm

Re: Oil change now or wait? boxsterd - Thursday, 8 December, 2011, at 1:33:28 pm

Fine to wait. A few comments though. grant - Thursday, 8 December, 2011, at 7:57:01 pm

Thanks to all for your comments *NM* Bob D - Wednesday, 14 December, 2011, at 9:31:10 am

Can't find a link: wiring garage remote to 12V and hiding opener in front bumper AndyInNYC - Tuesday, 13 December, 2011, at 11:54:25 am

Re: Can't find a link: wiring garage remote to 12V and hiding opener in front bumper bgale (Montrose,CO) - Tuesday, 13 December, 2011, at 12:25:24 pm

Here's one... BoxsterBob - San Carlos - Tuesday, 13 December, 2011, at 4:48:54 pm

Re: Here's one... AndyInNYC - Tuesday, 13 December, 2011, at 5:05:08 pm

How about Guenter in Ontario - Tuesday, 13 December, 2011, at 5:44:27 pm

Re: Can't find a link: wiring garage remote to 12V and hiding opener in front bumper SPG356 - Tuesday, 13 December, 2011, at 6:03:21 pm

Re: Can't find a link: wiring garage remote to 12V and hiding opener in front bumper Al in Melbourne Beach - Tuesday, 13 December, 2011, at 6:42:40 pm

Al, that seems to be exactly what I'm looking for AndyInNYC - Tuesday, 13 December, 2011, at 6:48:47 pm

Re: Al, that seems to be exactly what I'm looking for SPG356 - Tuesday, 13 December, 2011, at 10:02:52 pm

Re: Al, that seems to be exactly what I'm looking for (Long) Al in Melbourne Beach - Tuesday, 13 December, 2011, at 10:28:46 pm

engine swap getready - Tuesday, 13 December, 2011, at 5:44:19 pm

Re: engine swap BoxsterBob - San Carlos - Tuesday, 13 December, 2011, at 7:19:42 pm

Metallic whine At startup? wewannaporsche - Tuesday, 13 December, 2011, at 1:38:09 pm

Its the cold air pump.... jg wnc - Tuesday, 13 December, 2011, at 2:32:13 pm

Re: Metallic whine At startup? Laz - Tuesday, 13 December, 2011, at 3:58:28 pm

TechnoPower2 Kit installed.. CAN YOU SAY TORQUE! BOB W - Friday, 9 December, 2011, at 9:17:58 pm

Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE! BOB W - Friday, 9 December, 2011, at 9:25:05 pm

Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE! rrr - Saturday, 10 December, 2011, at 10:21:58 pm

I don't like.... Pedro (Odessa, FL) - Sunday, 11 December, 2011, at 5:13:07 pm

Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE! rrr - Sunday, 11 December, 2011, at 6:04:18 pm

You are correct... Pedro (Odessa, FL) - Monday, 12 December, 2011, at 10:09:00 am

Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE! jlegelis - Monday, 12 December, 2011, at 2:57:38 pm

I use the ... Pedro (Odessa, FL) - Monday, 12 December, 2011, at 8:55:31 pm

Be sure to check the 'FOR SALE' section for specials....you just never know what you might find Eric (Plug Guy) - Monday, 12 December, 2011, at 2:21:44 pm

Thank you Eric! *NM* Pedro (Odessa, FL) - Monday, 12 December, 2011, at 3:23:46 pm

Today I almost lost my chance for a 100K mile Boxster..... Tony in Whittier - Friday, 9 December, 2011, at 9:04:32 pm

Tony, Glad all turned out well dghii - Friday, 9 December, 2011, at 10:37:51 pm

Re: Today I almost lost my chance for a 100K mile Boxster..... Guenter in Ontario - Friday, 9 December, 2011, at 10:57:07 pm

Re: Today I almost lost my chance for a 100K mile Boxster..... CarreraLicious - Saturday, 10 December, 2011, at 9:46:02 am

it's what i call the nintendo mentality frogster - Sunday, 11 December, 2011, at 12:49:45 am

If I ever need to get rid of the Fikse Mach Vs, you will the be the first to know. *NM* Tony in Whittier - Sunday, 11 December, 2011, at 1:25:51 am

Cool! But give me a bit of advance notice… frogster - Sunday, 11 December, 2011, at 11:12:19 am

Re: Today I almost lost my chance for a 100K mile Boxster..... db997S - Monday, 12 December, 2011, at 10:01:31 am

3.4 replacing a 3.2 juliof16c - Friday, 2 December, 2011, at 12:01:25 am

Re: 3.4 replacing a 3.2 BoxsterBob - San Carlos - Friday, 2 December, 2011, at 9:55:05 am

Re: 3.4 replacing a 3.2 jg wnc - Friday, 2 December, 2011, at 11:06:14 am

Re: 3.4 replacing a 3.2 whall - Friday, 2 December, 2011, at 12:00:01 pm

For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt *NM* patrick - Friday, 2 December, 2011, at 9:19:46 pm

Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt juliof16c - Sunday, 4 December, 2011, at 12:07:20 am

Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt Eric in Lincoln - Sunday, 4 December, 2011, at 12:17:26 am

Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt juliof16c - Sunday, 4 December, 2011, at 1:53:47 am

Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt whall - Sunday, 4 December, 2011, at 1:10:25 pm

Remote Locking Rattling Sound
John99Boxster - Sunday, 11 December, 2011, at 10:35:45 am

About the only thing I can think of is there is a plastic bushing that snaps into the wall...
MarcW - Sunday, 11 December, 2011, at 10:59:53 am

Re: Remote Locking Rattling Sound
SPG356 - Sunday, 11 December, 2011, at 11:16:58 am

Re: Remote Locking Rattling Sound
John99Boxster - Sunday, 11 December, 2011, at 12:56:19 pm

Where exactly....
Pedro (Odessa, FL) - Sunday, 11 December, 2011, at 12:25:58 pm

Re: Where exactly....
John99Boxster - Sunday, 11 December, 2011, at 1:16:19 pm

Re: Where exactly....
John99Boxster - Sunday, 11 December, 2011, at 1:31:26 pm

Here is a picture
John99Boxster - Sunday, 11 December, 2011, at 1:45:28 pm

There should be a little black rubber stopper
Guenter in Ontario - Sunday, 11 December, 2011, at 1:52:23 pm

What is this?
John99Boxster - Sunday, 11 December, 2011, at 1:58:32 pm

I GOT IT!
John99Boxster - Sunday, 11 December, 2011, at 2:09:16 pm

Retention ring for the backup fuel filler door release
bar10dah - Wednesday, 14 December, 2011, at 10:03:58 pm

To post pictures, see the instructions under "Announcements" near the top left. NM
Guenter in Ontario - Sunday, 11 December, 2011, at 1:46:45 pm

Re: To post pictures, see the instructions under "Announcements" near the top left.
John99Boxster - Sunday, 11 December, 2011, at 1:52:14 pm

Is the the rubber stopper...looks like its missing 1/2 of the circle
John99Boxster - Sunday, 11 December, 2011, at 2:03:13 pm

Problem resolved....THANK YOU ALL NM NM
John99Boxster - Sunday, 11 December, 2011, at 2:10:17 pm

Thank goodness. The rattling was
Guenter in Ontario - Sunday, 11 December, 2011, at 3:32:26 pm

Re: Thank goodness. The rattling was
John99Boxster - Sunday, 11 December, 2011, at 4:49:06 pm

DIY to replace the actuator
bar10dah - Wednesday, 14 December, 2011, at 10:23:46 pm

New Boxster Pics and Article
Todd in PA - Tuesday, 13 December, 2011, at 7:36:32 am

So much for evolution over revolution
db997S - Tuesday, 13 December, 2011, at 8:44:23 am

I think...
Pedro (Odessa, FL) - Tuesday, 13 December, 2011, at 10:22:29 am

I like it a lot
Lawdevil & CURVN8R - Tuesday, 13 December, 2011, at 8:00:29 pm

Re: New Boxster Pics and Article
jwdbox - Tuesday, 13 December, 2011, at 11:12:37 am

I'd like to see it "in the metal" first
Guenter in Ontario - Tuesday, 13 December, 2011, at 11:20:17 am

These wheels are "HUGE 18-inch alloys", however
Gary in SoFL - Tuesday, 13 December, 2011, at 11:41:00 am

Thanks for clarifying that Gary
Guenter in Ontario - Tuesday, 13 December, 2011, at 5:35:21 pm

I have the Gimungus 19" wheels on mine! NM
nmanitou (Doug in MI) - Tuesday, 13 December, 2011, at 6:55:29 pm

"Gimungus" 19s would be a better fit on these cars:
Laz - Wednesday, 14 December, 2011, at 1:19:20 pm

Re: Thanks for clarifying that Gary
Leor ('09S, North of Boston) - Tuesday, 13 December, 2011, at 7:15:14 pm

Re: New Boxster Pics and Article
TedP - Tuesday, 13 December, 2011, at 10:45:54 pm

Re: New Boxster Pics and Article
silverbox03 - Wednesday, 14 December, 2011, at 6:20:03 pm

Oil change now or wait?
Bob D - Thursday, 8 December, 2011, at 1:04:06 pm

It depends
Guenter in Ontario - Thursday, 8 December, 2011, at 1:20:23 pm

Re: Oil change now or wait?
boxsterd - Thursday, 8 December, 2011, at 1:33:28 pm

Fine to wait. A few comments though.
grant - Thursday, 8 December, 2011, at 7:57:01 pm

Thanks to all for your comments NM
Bob D - Wednesday, 14 December, 2011, at 9:31:10 am

Can't find a link: wiring garage remote to 12V and hiding opener in front bumper
AndyInNYC - Tuesday, 13 December, 2011, at 11:54:25 am

Re: Can't find a link: wiring garage remote to 12V and hiding opener in front bumper
bgale (Montrose,CO) - Tuesday, 13 December, 2011, at 12:25:24 pm

Here's one...
BoxsterBob - San Carlos - Tuesday, 13 December, 2011, at 4:48:54 pm

Re: Here's one...
AndyInNYC - Tuesday, 13 December, 2011, at 5:05:08 pm

How about
Guenter in Ontario - Tuesday, 13 December, 2011, at 5:44:27 pm

Re: Can't find a link: wiring garage remote to 12V and hiding opener in front bumper
SPG356 - Tuesday, 13 December, 2011, at 6:03:21 pm

Re: Can't find a link: wiring garage remote to 12V and hiding opener in front bumper
Al in Melbourne Beach - Tuesday, 13 December, 2011, at 6:42:40 pm

Al, that seems to be exactly what I'm looking for
AndyInNYC - Tuesday, 13 December, 2011, at 6:48:47 pm

Re: Al, that seems to be exactly what I'm looking for
SPG356 - Tuesday, 13 December, 2011, at 10:02:52 pm

Re: Al, that seems to be exactly what I'm looking for (Long)
Al in Melbourne Beach - Tuesday, 13 December, 2011, at 10:28:46 pm

engine swap
getready - Tuesday, 13 December, 2011, at 5:44:19 pm

Re: engine swap
BoxsterBob - San Carlos - Tuesday, 13 December, 2011, at 7:19:42 pm

Metallic whine At startup?
wewannaporsche - Tuesday, 13 December, 2011, at 1:38:09 pm

Its the cold air pump....
jg wnc - Tuesday, 13 December, 2011, at 2:32:13 pm

Re: Metallic whine At startup?
Laz - Tuesday, 13 December, 2011, at 3:58:28 pm

TechnoPower2 Kit installed.. CAN YOU SAY TORQUE!
BOB W - Friday, 9 December, 2011, at 9:17:58 pm

Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE!
BOB W - Friday, 9 December, 2011, at 9:25:05 pm

Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE!
rrr - Saturday, 10 December, 2011, at 10:21:58 pm

I don't like....
Pedro (Odessa, FL) - Sunday, 11 December, 2011, at 5:13:07 pm

Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE!
rrr - Sunday, 11 December, 2011, at 6:04:18 pm

You are correct...
Pedro (Odessa, FL) - Monday, 12 December, 2011, at 10:09:00 am

Re: TechnoPower2 Kit installed.. CAN YOU SAY TORQUE!
jlegelis - Monday, 12 December, 2011, at 2:57:38 pm

I use the ...
Pedro (Odessa, FL) - Monday, 12 December, 2011, at 8:55:31 pm

Be sure to check the 'FOR SALE' section for specials....you just never know what you might find
Eric (Plug Guy) - Monday, 12 December, 2011, at 2:21:44 pm

Thank you Eric! NM
Pedro (Odessa, FL) - Monday, 12 December, 2011, at 3:23:46 pm

Today I almost lost my chance for a 100K mile Boxster.....
Tony in Whittier - Friday, 9 December, 2011, at 9:04:32 pm

Tony, Glad all turned out well
dghii - Friday, 9 December, 2011, at 10:37:51 pm

Re: Today I almost lost my chance for a 100K mile Boxster.....
Guenter in Ontario - Friday, 9 December, 2011, at 10:57:07 pm

Re: Today I almost lost my chance for a 100K mile Boxster.....
CarreraLicious - Saturday, 10 December, 2011, at 9:46:02 am

it's what i call the nintendo mentality
frogster - Sunday, 11 December, 2011, at 12:49:45 am

If I ever need to get rid of the Fikse Mach Vs, you will the be the first to know. NM
Tony in Whittier - Sunday, 11 December, 2011, at 1:25:51 am

Cool! But give me a bit of advance notice…
frogster - Sunday, 11 December, 2011, at 11:12:19 am

Re: Today I almost lost my chance for a 100K mile Boxster.....
db997S - Monday, 12 December, 2011, at 10:01:31 am

3.4 replacing a 3.2
juliof16c - Friday, 2 December, 2011, at 12:01:25 am

Re: 3.4 replacing a 3.2
BoxsterBob - San Carlos - Friday, 2 December, 2011, at 9:55:05 am

Re: 3.4 replacing a 3.2
jg wnc - Friday, 2 December, 2011, at 11:06:14 am

Re: 3.4 replacing a 3.2
whall - Friday, 2 December, 2011, at 12:00:01 pm

For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt NM
patrick - Friday, 2 December, 2011, at 9:19:46 pm

Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt
juliof16c - Sunday, 4 December, 2011, at 12:07:20 am

Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt
Eric in Lincoln - Sunday, 4 December, 2011, at 12:17:26 am

Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt
juliof16c - Sunday, 4 December, 2011, at 1:53:47 am

Re: For an 03 Boxster 3.4 No. 3.6/3.8 Yes nt
whall - Sunday, 4 December, 2011, at 1:10:25 pm

Generally the best course of action is to use an engine of a similar MY...
MarcW - Monday, 5 December, 2011, at 9:23:41 am